VIVO FILE-WC01B Black Wooden Filing Cabinet with Wheels Instruction Manual
- June 17, 2024
- Vivo
Table of Contents
VIVO FILE-WC01B Black Wooden Filing Cabinet with Wheels
Instruction
Install Handle (O) into File Drawer Front (I) using M4x20mm Screws (S-B) and 4mm Allen Wrench (T-A).
Specifications
| Component | Tool/Accessory | Description |
|---|---|---|
| Handle (O) | — | The handle to be installed on the file drawer front. |
| File Drawer Front (I) | — | The front panel of the file drawer where the handle |
is to be attached.
M4x20mm Screws (S-B)| —| Screws used to secure the handle to the drawer front.
4mm Allen Wrench (T-A)| —| The tool used for tightening the M4x20mm screws.
Description of Diagram
The diagram shows the assembly process for attaching the handle to the file drawer front. The handle is depicted above the drawer front, aligned with two pre-drilled holes. Below the handle, there are two screws and an Allen wrench. The screws are labeled as “S-B” and the wrench as “T-A.” An arrow indicates the direction in which the handle should be moved to align with the holes in the drawer front.
FAQ
What size screws are required to install the handle?
M4x20mm screws (S-B) are required for the handle installation.
What tool do I need to use for installing the handle?
You will need a 4mm Allen Wrench (T-A) to tighten the screws and secure the handle.
How do I know where to install the handle on the drawer front?
The drawer front should have pre-drilled holes that align with the handle. Position the handle over these holes and use the screws to secure it in place.
STEP 4
Install Handle (O) into File Drawer Front (I) using M4x20mm Screws (S-B) and
4mm Allen Wrench (T-A).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>