BLAUPUNKT 5B30N0250GB Integrated Oven Instruction Manual

BLAUPUNKT 5B30N0250GB Integrated Oven

ACKNOWLEDGMENT

Thank you for purchasing our product. We hope you enjoy using the many features and benefits it provides. Before using this product please study this entire Instruction Manual carefully. Keep this manual in a safe place for future reference. Ensure that other people using the product are familiar with these instructions as well.

WARNING

• When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding agent used for the insulating panels within the oven. Please run up the new empty product with the conventional cooking function, 250 ℃, 90 minutes to clean oil impurities inside the cavity.
• During the first use, it is completely normal that there will be slight smoke and odors. If it does occur, you merely have wait for the smell to clear before putting food into the oven.
• Please use the product under the open environment.
• The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
• If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
• During use, the appliance becomes very hot. Care should be taken to avoid touching heating elements inside the oven.
• Do not allow children to go near the oven when it is operating, especially when the grill is on.
• Ensure that the appliance is switched off before replacing the oven lamp to avoid the possibility of electric shock.
• The means for disconnection must be incorporated in the fixed wiring by the wiring specifications.
• Children should be supervised to ensure that they do not play with the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.
• Accessible parts may become hot during use. Young children should be kept away.
• An all-pole disconnection means must be incorporated in the fixed wiring by the wiring rules.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in the shattering of the glass.
• A steam cleaner is not to be used.
• The appliances are not intended to be operated by means of an external timer or separate remote-control system.
• The instructions for ovens that have shelves shall include details indicating the correct installation of the shelves.

SAFETY HINTS

• Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet hands.
• For oven: Oven door should not be opened often during the cooking period.
• The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement, and installation by unauthorized personnel.
• When the door or drawer of oven is open do not leave anything on it, you may unbalance your appliance or break the door.
• Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool down before touching onto the points that are exposed to the heat directly.
• If you will not use the appliance for a long time, it is advised to plug it off.

FITTING THE OVEN INTO THE KITCHEN UNIT

Fit the oven into the space provided in the kitchen unit; it may be fitted underneath a work top or into an upright cupboard. Fix the oven in position by screwing into place, using the two fixing holes in the frame. To locate the fixing holes, open the oven door and look inside. To allow adequate ventilation, the measurements and distances adhered to when fixing the oven.

IMPORTANT

If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit that are next to the oven must be made of a heat resistant material. Ensure that the glues of units that are made of veneered wood can with stand temperatures of at least 120 ºC. Plastics or glues that cannot withstand such temperatures will melt and deform the unit, once the oven has been lodged inside the units, electrical parts must be completely insulated. This is a legal safety requirement. All guards must be firmly fixed into place so that it is impossible to remove them without using special tools. Remove the back of the kitchen unit to ensure an adequate current of air circulates around the oven. The hob must have a rear gap of at least 35 mm.

DECLARATION OF COMPLIANCE

When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because these are dangerous to children.

PRODUCT DESCRIPTION

OPERATION INSTRUCTIONS

Clock Setting
After connecting the unit to the power, the symbols “0:00” will be visible on the display.

1. Press “ “, the hour figures will flash.
2. Rotate ” K2″ to adjust the hour figures, (time should be within 0–23).
3. Press “ “, the minutes will flash.
4. Rotate “K2 ” to adjust the minutes setting, (time should be within 0–59).
5. Press “ ” to finish the clock settings. “:” will flash, and the time will be illuminated.
   Note: The clock is 24 hours. After power on, if not set, the clock will show “0:00”.

Function Setting

1. Rotate ” K1 ” to choose the cooking function you require. The related symbol will illuminated.
2. Rotate ” K2 ” to adjust the temperature.
3. Press “ ” to confirm the start of cooking.
4. If step 2 is ignored, Press “ ” to confirm the start of cooking and the default time is 9 hours, the default temperature will display on the LED.

NOTE:

1. The step quantities for the adjustment time of the knobs are as follow: 0–0:30min: step 1 minute 0:30–9:00hour:step 5 minutes
2. The step quantities for the adjustment of temperature is 5 C, and the grill function is 30 C. O O
3. Rotate ” K1″ to adjust the cooking time when cooking begins. Then press “ ” to confirm. If “ “is not pressed within 3 seconds, the oven will revert to the previous time to continue cooking.
4. Rotate”K2 ” to adjust the temperature when cooking begins. The related indicator will be illuminated.
   Then press” ” to start cooking. If “ ” not pressed in 3 seconds, the oven will revert back to the previous temperature to continue cooking.

Lamp Setting

1. Rotate”K1″ to select the relevant function, then the corresponding icon will be on.
2. Press “ ” button to start, “0:00″ and lamp icon” ” will light up, ” : ” will flash

Inquiring function

In the following states, you can use inquiring function, after 3 seconds return to the current state.

1. During working state, if the clock was set, press “ ” button to see the current time; if the reminder function was set, press the” ” button to see the time of the reminder.
2. In reminding state, if the clock was set, press “ ” button to see the current time.
3. In clock display state, if the reservation function was set, press “ ” button to see the time of reservation.

Child lock function

• To Lock : press “ ” and “ ” simultaneously for 3 seconds, there will be a long “beeping” sound and the “ ” will be illuminated.
• Lock quitting : press “ ” and “ ” simultaneously for 3 seconds, there will be a long “beeping” sound indicating the child-lock is released.
  Note : During working mode, if you want to stop cooking,press stop button quickly. Do not need to long pressing on stop button,it is invalid

Reminder Function:

This function will help to remind you to start cooking in a certain time from 0:01 to 9:59. Only when oven in standby mode, the reminder can be set. Follow below to set the reminder:

1. Press reminder setting button “ “;
2. Rotate ” K2 ” to set the hour time of reminder. (Time should be within 0–9).
3. Press reminder setting button “ ” again;
4. Rotate “K2 ” to set minute time of reminder. (Time should be within 0–59).
5. Press “ ” to confirm setting. The time will count down.

Note : The oven buzzer will sound for 10 times after the time back to the zero hour. You can cancel the reminder during setting by pressing the “ ” button; After the reminder has been set, you can cancel it by pressing stop button twice

Start/Pause/Cancel Function

1. If the cooking time has been set, press “ ” to start cooking. If the cooking is paused, press “ ” to resume cooking.
2. During cooking process, press “ ” once to pause the cooking. Press “ ” twice to cancel the cooking.

Energy-Saving Function

1. In waiting state and reminding state , press “ ” for three seconds, the LED display will go off and set to energy-saving mode.
2. If no operation in10 minutes under waiting state, the LED display will go off and go into energy-saving mode.
3. Under the energy-saving mode, press any key or rotate any can quit the energy-saving mode.

Reservation function

1. To use the reservation function, the clock must be set in advance. Then, in the way of setting the clock, the reserved time that the oven starts to cook must be set (a> Press reservation setting button” “; b> Rotate “K2” to set the hour time of reservation. Time should be within 0–23. c> Press reservation setting button “ ” again; d> Rotate “K2” to set minute time of reservation. Time should be within 0–59.), but don’t press the clock this time. Next, turn knob “K1” to choose function
2. Press “ ” button to set cooking time and temperature. Then turn knob “K1″ to adjust time, and ” K2 ” to adjust the temperature.
3. Press the “ ” button to finish the cooking setting, and the clock will be on the screen with the reservation sign “ ” always lighting. But no other function signals are presented. Reservation time can be checked by pressing “ “, 3 seconds later the screen will show clock again.
4. At the time of reservation, cooking will start automatically after a buzzing sound. The reservation symbol “ ” will put out, and other indicating signs will work normally.

Note:

1. Lamp, defrost, probe can’t be reserved.
2. During the status of the reservation, press the cancel button once, the time and temperature of the reservation menu will be shown with the menu icon lighting constantly. Press again, the screen returns to the clock, or press the start button to return to reservation status.
3. The reminder function is invalid during reservation status.

Note

1. The oven lamp will be on for all functions.
2. Once the cooking program has been set and the” ” button is not pressed within 5 minutes, the current time will be displayed or turned back to the waiting state. The setting program will be invalid.
3. The buzzer will sound once when effectively pressed, if not effectively pressed there will be no response.
4. The buzzer will sound five times to remind you when cooking has finished.

ACCESSORIES

• Wire shelf : For grill .dishes, cake pan with items for roasting and grilling.
• Slider bracket : These shelf support rails on the right and left sides of the oven can be removed for cleaning oven walls.(only for specific modles)
• Universal pan: For cooking large quantities of food such as moist cakes, pastries, frozen food etc,or for collecting fat/ spillage and meat juices.
• Telescopic runner: Some of models might with telescopic runners to facilitate the use of oven.
• These telescopic runners could be disassembled for cleaning by unscrew the screws use to fix it.  (only for specific modles)

SHELF PLACEMENT WARNING:
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail is imperative. This will ensure that during careful removal of the shelf or tray, hot food items should not slide out.

BULB REPLACEMENT

For replacement, process as follows:

1. Disconnect power from the mains outlet or switch off the circuit breaker of the unit’s mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
   NOTE : Only use 25-40W/220V-240V , T300°C halogen lamps.

SECURING THE OVEN TO THE CABINET

1. Fit oven into the cabinet recess.
2. Open the oven door.
3. Secure the oven to the kitchen cabint with two distance holders “A” which fit the holes in the oven frame and fit the two screws “B”.

VENTILATING OPENINGS

When cooking is finished or in pause state or in waiting state, if the oven’s center temperature is over 75 degree, the cooling fan will continue working for 15 minutes. Or when the oven’s center temperature becomes lower than 75 degree, the cooling fan will stop in advance.

**INSTALLATION

**

NOTE : The number of accessories included depends on the particular appliance purchased.

CLEANING AND MAINTENANCE

For the sake of a good appearance and reliability, keep the unit clean. The modern design of the unit facilitates maintenance to a minimum. The parts of the unit which come into contact with food have to be cleaned regularly.

• Before any maintenance and cleaning, disconnect the power.
• Set all controls in the OFF position.
• Wait until the inside of the unit is not hot but only slightly warm- cleaning is easier than when warm. Clean the surface of the unit with a damp cloth, soft brush or fine sponge and then wipe dry.
• In case of heavy soiling, use hot water with non- abrasive cleaning product.
• For cleaning the glass of the oven door,do not use abrasive cleaners or sharp metal scrapers, these can scratch the surface or lead to the glass being damaged.
• Never leave acidic substances (lemon juice, vinegar) on stainless steel parts.
• Do not use a high pressure cleaner for cleaning the unit. The baking pans may be washed in mild detergent.

DISPOSAL

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment(WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out by local environmental regulations for waste dispoasl.For more detailed information about the treatment, recovery, and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Installation Instruction

Installation instructions of the door frame-up cover and rotation bracket assembly

Preparation before disassembly
Most of the tools that you might need are shown below. Some tools are optional

Parts disassembly
The oven door’s disassembly

• Step 1: Open the oven door completely.
• Step 2: Pull the hinge locks forward on both hinges, until they stop
• Step 3: Raise the door so that it is at a 30° angle from the front of the oven. Hold the door with one hand on each side. Lift the door up and out

Warning : Don’t forcibly pull out the door and prevent the glass breakage during the dismantling process.
Warning : The hinge springs could release, causing personal injury.
Warning : Do not lift or carry the oven door by the door handle.

The oven door components’ disassembly

• Step 1: Disassemble the door from the oven, then put it on the bench horizontally, see 2.1.
• Step 2: Open the door rotation bracket assembly, refer the action in the following picture.
• Step 3: Lift up the door outer glass and pul it out, then take the door’s middle glass out as the same way
• Step 4: Use one hand to push the door frame up the cover toward the middle part (1), then lift up the cover with the other hand (2);
• Step 5: See the screwdriver to disassemble the rotation bracket assemblies, then take out it from the door bracket;
• Step 6: Change the new rotation bracket assemblies and insert it into the snap joints, then fix it with screw.
• Step 7: Assemble the new door frame up cover on the bracket and make sure it be stable;
• Step 8: Assemble the door’s middle glass and pay attention that it should be put at the second floor of the door frame up cov er for 3-layer glass door, and for a 4-layer glass door, another middle glass should be placed at the first floor;
• Step 9: Assemble the outer glass and accomplish the replacement work.

Service

www.blaupunkt-einbaugeraete.com

Deutschland/Germany
service.DE@blaupunkt-einbaugeraete.com

Österreich/Austria
service.AT@blaupunkt-einbaugeraete.com

Niederlande/Netherlands
service.NL@blaupunkt-einbaugeraete.com

Belgien/Belgium
service.BE@blaupunkt-einbaugeraete.com

Schweden/Sweden
service.SE@blaupunkt-einbaugeraete.com

Frankreich/France
sav@blaupunkt-electromenager.fr
Telefon: (+33) 0800 303 603

00 800 32 289 000

Luxemburg/Luxembourg
service.LU@blaupunkt-einbaugeraete.com

Schweiz/Switzerland
service.CH@blaupunkt-einbaugeraete.com

Italien/Italy
service.lT@blaupunkt-einbaugeraete.com

Spanien/Spain
service.ES@blaupunkt-einbaugeraete.com

Kroatien/Croatia
service.HR@blaupunkt-einbaugeraete.com

Slowenien/Slovenia
service.Sl@blaupunkt-einbaugeraete.com

Großbritannien/Great Britain
service.GB@blaupunkt-einbaugeraete.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>