DELVCAM DELV-4KSDI28 28 Inch 4K Ultra HD Monitor User Guide
- June 17, 2024
- Delvcam
Table of Contents
DELVCAM DELV-4KSDI28 28 Inch 4K Ultra HD Monitor
IMPORTANT SAFETY INSTRUCTIONS
- Read the manual before using this product.
- Keep the manual for future reference.
- Do not place the display screen on the ground.
- Avoid heavy impact or dropping.
- Do NOT use chemical solutions to clean this product. Wipe with a clean soft cloth to maintain the brightness of the surface.
- Do not block any vent holes.
- Follow the instructions when making adjustments. Improper adjustments may result in damage.
- Unplug the power and remove the battery if you do not plan to use the monitor for an extended period or during a thunderstorm.
FEATURES
4K Ultra-HD Resolution
Ultra HD 4K screens (3840×2160)
Large Screen
28″/24″ 16:9 LED display, 170° wide viewing angles.
Multiple Viewing Options
Full Screen, Split, and Quad
Carrying Case
A rugged carrying case provides added protection, stability, and portability.
INCLUDED ACCESSORIES
- Collapsible Sunshade
- Carrying Case
- 15V 4-Pin XLR Power Adapter
- Battery Plate Bracket
- V-mount with Power Cable
- TALLY Connector Kit
SPECIFICATIONS
| Display Screen: | 28 inch/ 24 inch |
|---|---|
| Resolution: | 3840 x 2160 |
| Brightness: | 450/cd/m² |
| Aspect Ratio: | 16:9 |
| Contrast | 1000:1 |
| Viewing Angle: | 170°/160°(H/V) |
| Input : | 3G-SDI, HDMI (4K & 1080P), VGA, DVI |
| Output: | 3G-SDI |
| Audio: | 2 Speaker (L/R), Earphone Jack |
| Power Input: | 15VDC |
| Input Voltage: | 12-24VDC (XLR) |
| Power Consumption: | 48W |
| Backlight; | LED |
| 28″ Dimensions (LxWxD): | 26.38×16.73×1.77in/29.96×18.66×6.81in w/case |
| 28″ Weight: | 20.72lbs / 46.3lbs with case |
| 24″ Dimensions (LxWxD): | 22.4×14.82×1.77in/26.2×16.38×6.8in w/case |
| 24 ” Weight: | 18.96lbs/ 37.7lbs with case |
SUNSHADE INSTALLATION
Remove the protective backing from the Velcro that is on the edge of the sunshade. Place the sunshade on the outside edge of the carrying case and press Velcro into place.
MONITOR FRONT
- SDI input switch
- HDMI 1- 4 input switch
- DVI input switch
- VGA input switch
- MENU/ENTER Press to select the menu.
- ◄ Select options in the menu. Before entering the menu, press once to activate the volume, and press again to scroll through options.
- ► Select options in the menu.
- EXIT Back or exit
- F1-F4 User definable buttons Default function options: F1 Display Mode, F2 Display Rotate, F3 Safety Marker, F4 Aspect
- Power Indicator Light Red: Standby, Green: Working
- Earphone Jack
MONITOR REAR
- Carrying handle
- VESA 75×75 & VESA 100×100
- Strain relief lacing bar
- TALLY input
- VGA input
- DVI input
- HDMI input × 4 (HDMI 1: HDMI2.0, support 4K 60Hz, HDMI 2, HDMI 3 and HDMI 4: HDMI1.4, support 4K 30Hz)
- Unbalanced audio input L/R
- SDI input/output ports
- XLR Power
- Power switch I = ON, O = OFF
BUTTON OPERATION
The ◄ ► buttons are volume default controls.
MENU OPERATION
Turn the power ON. Press the “ MENU“ button to access first-level options:
- Picture
- Function
- Display Mode
- Display Settings
- Input
- Audio
- VGA Controls
- Systems
- Information
Use ◄ ► buttons to highlight the desired option. Press the “MENU” button to confirm. Press the “EXIT” button to return/exit the menu.
MENU SETTING F1 – F4 user definable shortcut buttons
Press and hold any one of the 4 buttons until the shortcut menu appears in the upper right. The current option will be highlighted in white. Using the ◄ ► buttons, cycle through the options, which will be yellow, unavailable options will be grey. Press the “MENU” button to set the selected option. Functions can be customized to meet users needs: centre marker, safety marker, aspect ratio, under scan, check field, image freeze, peaking, display mode and image flip.
Default options
- F1：Display Mode
- F2：Display Rotate
- F3：Safety Marker
- F4：Aspect
SETTINGS
Picture
| Brightness| 0-100
Contrast| 0-100
Saturation| 0-100
Hue| 0-100
Sharpness| 0-4
Temperature| 9300, 7500, 6500, 5800, User
Backlight| 0-100
Function
| Center Marker| ON, OFF
Safety Marker| OFF, 95%, 93%, 90%, 88%, 85%, 80%
Aspect| Full Screen: 16:9, 4:3, 1.85:1, 2.35:1
Underscan| ON, OFF
Check Field| OFF, Red, Green, Blue
Freeze Input| ON, OFF
Peaking| ON, OFF
Display Mode| 1P, 2P LR, 2P TB, 2P PIP, 4P
Display Setting
| Display Rotate| 0°, 90°, 180°, 270°, available in single display
LR Ratio| 0-4, available in dual display, left & right
Input Swap| Available in dual display, left & right
Select Region| The menu setting to the region selected
Input| Signal switch to region selected
Audio
| Volume| 0-100
Audio Source| Analog, Digital 1, Digital 2, Digital 3,
Digital 4
VGA—for adjusting VGA signal modes
| Auto Adjust| Press to confirm
H Position| 0-100
V Position| 0-100
Clock| 0-100
Phase| 0-100
Info| Displays current information
SETTINGS
System
| Reset| Press to confirm
Menu Time| 5-60s
OSD H Position| 0-100, to set menu display area
OSD V Position| 0-100, to set menu display area
Transparency| 0-255, to set menu transparency
OSD Rotate| 0°, 90°, 270°
Border Width| 0-10
Border Color| R, G, B, W
TROUBLESHOOTING
- Only black-and-white display: Check the colour saturation for the proper setting.
- Power on but no image: Ensure that the AV, HDMI, VGA, DVI, and 3G-SDI cables are properly connected. Use the standard power adapter that is included as improper power input may cause damage or injury.
- Incorrect or abnormal colours: Ensure that the cables are properly connected. Broken or loose pins in the cables may cause a bad connection.
- Image size error: Press “MENU → Function → Underscan” to zoom in/out pictures auto-matically when receiving HDMI signals
- Other problems: Press the “MENU” button. Choose “MENU→System→ Reset →Confirm”
- No Sound: Press the HDMI button
- delvcam.com
- P.O. Box 720, Mount Marion, New York 12456 USA Office: 800.543.0909 • Fax: 845.246.0626 • Email: info@delvcam.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>