DELVCAM DELV-3GHD-17RD 17.3 Inch 1RU Rack Drawer Video Monitor User Guide
- June 17, 2024
- Delvcam
Table of Contents
DELVCAM DELV-3GHD-17RD 17.3 Inch 1RU Rack Drawer Video Monitor
IMPORTANT SAFETY INSTRUCTIONS
- Read the manual before using this product.
- Keep the manual for future reference.
- Do not place the display screen on the ground.
- Avoid heavy impact or dropping
- Do NOT use chemical solutions to clean this product. Wipe with a clean soft cloth to maintain the brightness of the surface.
- Do not block any vent holes.
- Follow the instructions when making adjustments.
- Unplug the power and remove the battery if you do not plan to use the monitor for an extended period.
FEATURES
1RU Rack Drawer Design for Rack Mounting or as a Stand Alone Unit
Can be folded down and slid into a rack drawer to save space or to transport
Multiple Functions Including Cross Conversion
Vector Scope, Tally Interface, Histogram, and more
Embedded Audio Meter
Displays numerical indicators and headroom levels
INCLUDED ACCESSORIES
- 15VDC Power Supply
- Tally Connector
SPECIFICATIONS
Display Screen: | 17.3 inch IPS LCD |
---|---|
Resolution: | 1920 x 1080 |
Brightness: | 300cd/m² |
Contrast | 700:1 |
Aspect Ratio: | 16:9 |
Viewing Angle: | 178°/ 178°(H/V) |
Input Signal: | 3G-SDI, HDMI,DVI |
Output Signal: | 3G-SDI, HDMI |
Audio: | 2 Speakers, Earphone Jack |
Power; | 15VDC, 2.5A |
Power Consumption: | 32W |
Dimensions (LxHxD): | 19×1.73×19.98 in / 482.5×44×507.5mm |
Weight: | 18.96 lb / 8.6kg |
MONITOR FRONT
- Power
- SDI Mode
- HDMI Mode
- DVI Mode
- MENU
- < Volume/Shortcut Settings
- ›Volume/Shortcut Settings
- Back/Exit
- User Definable Buttons F1, F2, F3, F4
- Earphone Jack
- Speakers
MONITOR REAR
- Audio L
- Audio R
- HDMI Output Port
- HDMI Input Port
- DVI Input Port
- SDI Output Port
- SDI Input Port
- Tally Interface
- DC Power Port
MENU FEATURE SETTINGS
- Turn the power ON.
- Press MENU.
- Press the < > buttons to scroll through Menus
- Press MENU to select a Menu.
- Press the < > buttons to scroll through the features.
- Press MENU to select the feature.
- Press the < > buttons to scroll through feature options.
- Press MENU to Confirm
- Press EXIT twice to exit.
SHORTCUT SETTINGS
- Select < > to adjust volume, brightness, contrast, color, hue, sharpness and backlight.
- Press MENU to scroll through options.
- Use < > to make adjustments and press EXIT to confirm.
USER DEFINABLE FUNCTION BUTTONS F1, F2, F3, F4
- Press and hold any one of the 4 buttons until the shortcut menu appears on the right. Current option will be highlighted in white.
- Use the < > buttons to scroll through the options.
- Press the MENU to set the selected option.
Default options
- F1:Scan
- F2:Waveform
- F3:Aspect
- F4:Aspect Marker
SETTINGS
- Brightness 0-100
- Contrast 0-100
- Saturation 0-100
- Tint 0-100
- Sharpness 0-100
- Color Temp: 5500°/6500°/7500°/9300°K/User
- User mode only:
- RED Gain 0-255
- Green Gain 0-255
- Blue Gain 0-255
- Red Offset 0-511
- Green Offset 0-511
- Blue Offset 0-511
- Center Marker: OFF, ON
- Aspect Marker: OFF, 16:9, 1.85:1, 2.35:1 4:3, 3:2
- Safety Marker: OFF, 95%, 93%, 90%, 88%, 85%, 80%
- Marker Color: Red, Green, Blue, White, Black
- Marker Mat: Off, 1-7
- Thickness: 2, 4, 6
- Scan: Zoom, Aspect, Pixel to Pixel
- Aspect: Full, 16:9, 1.85:1, 2.35:1, 4:3, 3:2
- Underscan: OFF, ON
- H/V Delay: OFF, H, V, H/V
- Check Field OFF, Red, Green, Blue
- Zoom: 10-90%
- Freeze: OFF, ON
- DSLR: OFF, 5D2, 5D3
- 3G Format (available in SDI mode only): Normal, GBRA444 10Bit, YCbCrA444 10Bit, YCbCrA422 12Bit, GBR444 12Bit, YCbCr444 12Bit
SETTINGS
- Waveform: Multi, Y, YCbCr, RGB, OFF
- Peaking: OFF, ON
- Peaking Color: Red, Green. Blue, White
- Peaking Level: 0—100
- False Color: OFF, ON
- Exposure: OFF, ON
- Exposure Level: 0-100
- Histogram Y, RGB, Color
- Time Code: Off, LTC, VITC (SDI only)
- Volume: 0-100
- Level Meter: OFF, ON (Defaults to ON in Waverform)
- Audio Ch (SDI only): Ch1&Ch2, Ch3&Ch4, Ch5&Ch6, Ch7&Ch8, Ch9&Ch10, ChH11&Ch12, Ch13&Ch14, Ch15&Ch16
- Language: English, Chinese
- HDMI/SDI ConverT: OFF, ON
- Color Bar: OFF, 100%, 75%
- OSD Timer: 10s, 20s, 30s
- Back Light: 0-100
- Fan: Low, High
- Reset: OFF, ON
TROUBLESHOOTING
No Image
- Ensure that the cables are properly connected.
- Use the standard power adapter that is included as improper voltage input may cause damage or injury.
Incorrect or Abnormal Colors
- Ensure that the cables are properly connected.
- Check the signal source video output.
- Check Saturation for the appropriate setting.
- Ensure Check Field is set to colour or mono as required.
- Reset image ratio.
Image Size Error
- Go to Menu/Function/Underscan to zoom in and out of pictures automatically for HDMI signals
No Sound
- Supports audio signal only in embedded HDMI and SDI input.
- Ensure that the cables are properly connected.
- Check volume control.
- delvcam.com
- P.O. Box 720, Mount Marion, New York 12456 USA
- Office: 800.543.0909 • Fax: 845.246.0626 • Email: info@delvcam.com
References
Read User Manual Online (PDF format)
Loading......