delvcam DELV-RM2 Modular LCD Monitor System User Manual
- June 17, 2024
- Delvcam
Table of Contents
DELV-RM2 Modular LCD Monitor System
Operation Manual
DELV-RM2
Rackmount Kit for DELV-PRO56 5.6″
High Resolution Monitor
DELV-RM2
5.6″ High Resolution Monitor Rackmount System
Setup Instructions
The DELV-RM2 is designed to mount 2 DELVCAM DELV-PRO56 5.6” monitors.
If you are rackmounting just one monitor, then leave the installed filler
panel in place as shipped. The monitor can be installed in 2 different display
options. The second option (hood mounting) requires the optional DELV-RC Roll
Cage hood.
Flush Mounting
Using the large thumbscrew provided, mount the monitor as pictured in Figure1A
& Figure-1B. The slotted mounting tabs on the rackmount will be facing the
rear. Slide the monitor until it’s flush with the rack opening and then
tighten the thumbscrew (Figure-1C).
If the monitor is not being mounted in a console or rack, the
rear mounting tabs on the rackmount may be used to support the setup.
NOTE: IN THIS CONFIGURATION, YOU WILL NOT BE ABLE TO ACCESS THE MONITOR
ADJUSTMENTS ONCE THE RACK IS INSTALLED IN A 19” STANDARD RACK CONSOLE.
Hood Mounting
In this configuration the slotted mounting tabs will be facing front as shown
Figure-2A.
Place the monitor in the DELV-RC hood (optional) as shown in
Figure-2B. Next, use the thumbscrew screw to attach the hood/monitor assembly
to the slotted rackmount tab as shown in Figure-2A.
NOTE: IN THIS CONFIGURATION, ALL CONTROLS ARE ACCESSIBLE AFTER THE UNIT
IS RACKMOUNTED.
PLEASE FOLLOW ALL OF THE SAFETY INSTRUCTIONS PROVIDED WITH THE DELVCAM MONITOR
WHEN USING THIS SYSTEM.
© 2003 Tower Products, Inc. Saugerties, New York.
812 Kings Highway
Saugerties, NY 12477
Tel845-246-0428
Fax845-246-0626
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>