Sricam Sri033 Wire-Free Battery Camera Kit User Guide

Sricam Sri033 Wire-Free Battery Camera Kit

Product Description

Camera

1. Power Port 4.9V-5.3V, used for battery charging
2. Power Switch
3. Reset (pairing) button: Long press for 5 seconds to enter the pairing mode.

Base Station Box

1. Power Port 4.9V-5.3V, used for base station power supply
2. Network Port
3. SD card Port: support 4-128G memory card
4. Reset button: long press for 5 seconds to clear APP user information

Note: The camera and the base station box should be kept within 15 meters to ensure the normal use of the equipment.

Installing and charging the camera batteries

1. Insert two 18650 rechargeable batteries into the battery compartment (not included). Follow the steps shown below (you need to use a battery of the same brand and capacity, old and new batteries cannot be mixed)
2. Plug the power adapter into an indoor electrical outlet, the charging time is about 5-8 hours.

Device Connection

Step 1: SriHome App Installation
Method 1: Search for “SriHome” on Google Play or iOS App Store.
Method 2: Scan the QR code to download “SriHome” App.Step 2: Registration & Login on SriHome App
Step 3: Connect to Base Station to Power and Router
( Note: Please insert MicroSD card before connecting to power) Turn on the base station and connect the network cable Step 4: Turn on the camera
Open the soft rubber back cover at the bottom of the camera and move the power switch to “ON”
Step 5: Add the device to the APP
Open the “SriHome APP”, tap the “+”, follow the instructions to add the device.

Basic Function Introduction

Camera Feed Icon

1. Camera Channel: Select the camera you want to view
2. Light Mode: Three Light modes to choose.
3. Light Brightness adjustment
4. Black and white night vision video when Spotlight does not turn on
5. Light on mode
6. Light Alarm Mode: the spotlight automatically turns on when the camera detects motion at night, video recording is in color.
7. Settings: View or change the camera settings.
8. Full Screen
9. Screen Orientation
10. Resolution
11. Video
12. Take a snapshot
13. Speaker
14. Microphone

Settings Introduction

1. Time Settings: The time can be set according to the Time zone of the area.

2. Camera Settings: Used for camera connection and association.(up to 4 cameras can be connected at the same time)

3. Alarm Settings:

4. Notifications: It is opened to receive push alarm messages.

5. Alarm Notification Settings: You can set the content of the alarm sent by different cameras.

6. Prompt Sound: You can set different kinds of prompt sounds according to your needs (it is not possible to control a certain camera channel separately, just to distinguish between camera and base station for control)

7. PIR Settings: Need to activate“Human Inductor” detection, you can set frequency and schedule PIR of different cameras according to the needs.
   Detection Frequency: To set how many seconds to detect each time.
   PIR Time Schedule: To set the use of the human inductor function in different time periods, the PIR function is activated and will automatically record about 10 seconds of high definition video.

8. Network Settings: Used to select the network channel.

9. Security Settings: You can set the device management password.

10. Visitors Management: To protect user’s privacy, the first user is an administrator by default. Other users who log in to the camera need administrator permission or cannot log in with their ID and password.

How To Add New Camera

( This base station supports up to 4 cameras )

1. Press and hold the “RESET” button for 5 seconds until pairing mode.
2. Enter “SriHome” APP, tap Settings-> Camera Settings-> Add-> Keep the distance between the QR code and the camera lens is 10-30cm, if successful, you will hear the sound of successful pairing
   (This feature is only available to the administrator)

How to extend the battery life of the camera

1. Set the Frequency. Extend the detection frequency, the higher the detection frequency value, the longer the range of the PIR alarm function, the longer the battery life.
2. Set up a regular PIR program. PIR program setting can effectively reduce the number of camera activations, extending battery life.
3. Turn off the prompt sound. For example turn off camera sound, turn off base station sound or both at the same time

Shenzhen Sricctv Technology Co.,Ltd
Add: The building 40, 5th Industrial Park of Huaide Cuigang, Fuyong Street, Bao’an, Shenzhen, China More FAQs Please visit:
www.sricam.com/srihome/faq
If want to know more, please visit YouTube: SriHome IPC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>