DELVCAM DELV-2LCD-7XLPRO LCD Rackmount Monitor User Manual
- June 17, 2024
- Delvcam
Table of Contents
- DELV-2LCD-7XLPRO LCD Rackmount Monitor
- Product Description
- Product Specifications
- Items Included
- Front Panel Product Controls
- Rear Panel Connections
- Monitor Tilt Operation
- Rear & Side Panel Features
- Rear Panel Connections
- SAFETY WARNING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DELV-2LCD-7XLPRO LCD Rackmount Monitor
DUAL NTSC 7″ COLOR TFT 16:9 / 4:3
LCD RACKMOUNT MON I TOR SER I ES
USER MANUAL
Product Description
Get ready for the new and demanding high resolution video production market,
the Delvcam LCD series advanced monitoring system is loaded with features. A
dual monitor rackmount solution for the high end video environment, the
Delvcam LCD series provides both 16:9 and standard 4:3 aspect ratio video
monitoring in a well designed, rackmount housing with optional adjustable
pitch.
Features:
-
Picture Mode Select: 16:9 Wide Cinema Mode
4:3 Normal Mode
4:3 Wide Mode
4:3 Full Mode -
Looping BNC inputs
-
High Resolution Performance
-
NTSC-M
-
Standard CATV, UHF, VHF TV ATSC Receiver (Monitor A only: 7XLPRO)
-
Allows 180° of tilt while mounted in rack : 7XLPRO
-
Low power consumption and heat dissipation for mobile applications
-
Fits in standard 19″ rack, 4 spaces high
-
On screen color, tint, brightness and contrast controls
-
Wireless I/R remote control
-
Assembled in USA, 90 Day Warranty
Product Specifications
| DISPLAY | 7” active matrix TFT-LCD(16:9) |
|---|---|
| BACK LIGHT | Internal CCFT |
| DOT MATRIX | 0.129 (H) x 0.447 (V) |
| RESOLUTION | 1440 Horizontal x 234 Vertical |
| BRIGHTNESS | 300 cd/m2(NIT) |
| CONTRAST | 150:01:00 |
| VIEWING ANGLE | U :15 / D :35, R / L :50 |
| PIXEL CONFIGURATION | Striped |
| VIDEO SIGNAL | 1Vpp into 75Ω Terminated & Looping Input |
| STANDARD | NTSC-M |
POWER REQUIREMENTS
| DELV-2LCD-7XLPRO: | 110-220 VoltsAC 50/60 cycAuto switching, 14 watts |
|---|---|
| DELV-2LCD7XLS:(SDI) | 110-220 VoltsAC 50/60 cycAuto switching, 14 watts |
| DELV-2LCD-7XLRM: | Dual AC Power Adapters 12v 2A |
OPERATING TEMPERATURE REMOTE CONTROL
32-122 Degrees F (0-50°C)
Handheld Infrared
DIMENSIONS
| DELV-2LCD-7XL PRO: | 19″W x 4.5″D x 7″H (4RU) |
|---|---|
| DELV-2LCD7 XLS:(SDI) | 19″W x 4.5″D x 7″H (4RU) |
| DELV-2LCD-7XLRM: | 19″W x 1.75″D x 7″H (4RU) |
| WEIGHT | XLPRO-16.0 Lbs. |
XLS-18.0 Lbs.
RM-10.0 Lbs.
Items Included
DELV-2LCD-7XLPRO
- Hand-Held IR Remote Control Unit (2)
- 75 Ohm Terminator (2)
- RF Adapter (Monitor A Only)
- 110-220V 50/60Hz Power Adapter: 12VDC @ 4A
Items Included
DELV-2LCD-7XLRM & DELV-2LCD7XLS (SDI)
- Hand-Held IR Remote Control Unit (2)
- External RF Antenna Adapter Cable (2)
- Video / Audio Input Cable (2) — DELV–2 LCD–7 XLRM ONLY
- 110-220V 50/60Hz Power Adapter: 12VDC @ 1.2A (2)
- 12V Cigarette Adapter (2)
- 75 Ohm Terminator (2) — DELV–2 LCD 7 XLS (SDI) ONLY
Front Panel Product Controls
Complete instructions for LCD setup and operation are covered in the
included LCD manual. Please note that the manual does cover mechanical items
and topics that are no longer covered for the Delvcam dual-rack monitor
configuration. It is recommended that you read and study that manual first.
Rear Panel Connections
DELV-2LCD-7XLPRO 
- Power Entry
- Monitor B – Video input (looping)
- Monitor B – Audio input
- Monitor A – RF (CATV) input
- Monitor A – Audio input
- Monitor A – Video input (looping)
Monitor Tilt Operation
- Mount Monitor in Rack
- Push Top or Bottom of Monitor to Tilt as Desired
Rear & Side Panel Features
DELV-2LCD-7XLRM
For presentation clarity, information is shown
for one monitor only
- Headphone Jack
- AV Input 2
- AV Input 1
- 12V DC Power Input
- Internal Antenna
- Speaker – Left
- Speaker – Right
- External RF Input Jack
Rear Panel Connections
DELV-2LCD-7XLS (SDI)
- Audio L-R Input
- Power Input 12V DC @ 1.2A
- Encoder Circuit On / Off Note: If battery powered this switch must be turned off after use.
- Composite Video / SDI Video Switch
- Composite Video Input – Note: CVI uses side port AV1 input
- SDI Video Input (terminated)
- Composite Video Loop Output
SAFETY WARNING
- To prevent fire or shock hazard, do not expose this equipment to the environment of high humidity and dust. Do not use it in an unprotected outdoor installation or any area classified as wet.
- The temperature for installation should be kept between -40°C ~ +95°C. Avoid direct sunlight or extreme changes of temperature.
- For the sake of safety, do not disseminate the unit or put it on an unstable base. Do not drop it and avoid heavy impact.
- Ventilation: Openings in the enclosure are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. This unit should not be placed in a built-in installation unless proper ventilation is provided.
- Cleaning: Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth.
- Overload: Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
- Object and Liquid Entry : Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.
- Service: Do not attempt to open or service this unit yourself as opening or removing covers may expose you to dangerous voltage of other hazards.
1 Tower Drive
Saugerties, NY 12477
Tel845-246-0428
Fax845-246-0626
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>