DELVCAM DELV-SDI10-16×9 3G-SDI/HDMI Widescreen Monitor User Guide

DELVCAM DELV-SDI10-16×9 3G-SDI/HDMI Widescreen Monitor

Specifications

• Power: ON/OFF switch
• Battery indicator light (red while standby; green while working)
• Infrared signal receiver (work with remote control)
• A/V: circularly switch among HDMI, YPbPr, Video 1, Video 2, and SDI (Note: SDI optional)
• Right selection key, to select items on OSD menu. Press to adjust brightness among 6 levels.
• Left selection key, to select items on OSD menu.
• MENU: To activate OSD (on-screen display) menu. Long press to enter menu function setting.
• SDI signal output
• Video 1 signal input
• Video 2 signal input
• Audio signal input
• SDI (Serial Digital Interface) signal input
• Y signal input
• Pb signal input
• Pr signal input
• HDMI (High Definition Multimedia Interface) signal input
• Speakers
• 4-pin XLR DC power input
• DC power input
• EAR: Earphone jack

Product Usage Instructions

Cautions
Please keep in mind the following cautions while using the Delvcam DELV- SDI10-16×9:

1. Please use the adapter attached in the accessories.
2. Please keep away from strong light while using this product in order to obtain the clearest and the most colorful pictures. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please follow the instructions and troubleshooting to adjust the product. Another improper adjustment may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
5. Please unplug the power and remove the battery if long-term no-use, or during thunder weather.

Remote Control
The remote control for Delvcam DELV-SDI10-16×9 has the following buttons:

1. Power
2. Mute
3. Display: Switch among HDMI, YPbPr, Video 1, Video 2, and SDI(optional)
4. MENU: Enter menu function setting
5. Up: Move or change brightness among 6 levels
6. Down: Move
7. Left: Move or volume down or increase the function values in menu settings
8. Right: Move or volume up or decrease the function values in menu settings

Power Sources
This product can be powered using the following methods:

• 12V/1.5A DC adapter plug into the DC power input (See PRODUCT DESCRIPTION 20).
• Power from your camcorder via the 4-pin XLR interface (See PRODUCT DESCRIPTION 19).

Setting Menu
Before setting the menu functions, please make sure the device is connected correctly. When power on, press MENU on the device (See PRODUCT DESCRIPTION 5) or on the remote controller (See REMOTE CONTROLLER 4). The menu of function setting will display on the screen. Use the / buttons on the remote controller to change the values.

The following pictures are the setting displays of different modes:

1. OSD YPbPr/HDMI/SDI setting menu
2. Miscellaneous setting menu under YPbPr/HDMI/SDI modes
3. OSD AV setting menu (Video 1/Video 2)

FAQ

Q: What should I do if the product is not turning on?
A: Make sure you have connected the power source correctly and try using a different power adapter.

Q: Can I clean the product with chemical solutions?
A: No, please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.

Q: How do I adjust the brightness of the screen?
A: Use the right selection key on the device or the remote control to adjust the brightness among 6 levels.

Q: Can I use the SDI signal with this product?
A: SDI signal is optional. Please make sure you have the necessary equipment to use SDI signal with this product.

General Information

Thank you for choosing our TFT LCD (liquid crystal display) monitor. This product employs integrated circuits, low power consumption, and no radiation emission. It has fashion designed appearance and good portability. The TFT LCD screen is suitable for director in the inspection of the photography effect. Moreover, this product is able to be used in office, at home, or other proper positions. Please enjoy the benefits of convenience, safety, and space-saving from this TFT LCD monitor in different ways.

To ensure the best use of this product, please read this manual carefully beforehand.

CAUTIONS

1. Please use the adapter attached in the accessories.
2. Please keep away from strong light while using this product in order to obtain the clearest and the most colorful pictures.
3. Please avoid heavy impact or drop onto the ground.
4. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
5. Please follow the instructions and troubleshooting to adjust the product. Other improper adjustments may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use, or thunder weather.

PRODUCT DESCRIPTION

1. Power: ON/OFF ； switch concurrence battery indicator light (red while standby; green while working).
2. Infrared signal receiver (work with remote control).
3. A/V: circularly switch among HDMI, YPbPr, Video 1, Video 2, and SDI (Note: SDI optional).
4. ►: Right selection key, to select items on OSD menu. Press to adjust brightness among 6 levels.
5. ◄: Left selection key, to select items on OSD menu.
6. MENU To activate OSD (on-screen display) menu. Long press to zoom in/out pictures automatically when receiving HDMI (High-Definition Multimedia Interface) signals.
7. +: Volume up, or value up while using menu setting functions.
8. –: Volume down, or value down while using menu setting functions.
9. SDI signal output.
10. Video 1 signal input.
11. Video 2 signal input.
12. Audio signal input.
13. SDI (Serial Digital Interface) signal input.
14. Y signal input.
15. Pb signal input.
16. Pr signal input.
17. HDMI (High Definition Multimedia Interface) signal input.
18. Speakers
19. 4-pin XLR DC power input.
20. DC power input.
21. EAR: Earphone jack

REMOTE CONTROL

1. Power
2. Mute button
3. Display switch among HDMI、YPbPr、Video 1, Video 2, and SDI (optional, must with necessary equipment) circularly.(Note: SDI optional)
4. MENU: enter menu function setting
5. ▲: Up move; or change brightness among 6 levels
6. ▼: Down move
7. ◄: Left move; or volume down; or increase the function values in menu settings
8. ►: Right move; or volume up; or decrease the function values in menu settings

POWER SOURCES

This product package comes with a 12V/1.5A DC adapter plug into the DC power input (See PRODUCT DESCRIPTION 20). Also, this product is capable to use the power from your camcorder via the 4-pin XLR interface (See PRODUCT DESCRIPTION 19).

SETTING MENU

Before setting the menu functions, please make sure the device is connected correctly. When powered on, press “MENU” on the device (See PRODUCT DESCRIPTION 5) or on the remote controller (See REMOTE CONTROLLER 4). The menu of function settings will display on the screen. Press ◄/► buttons on the device or buttons on the remote controller to select items on the left of the display. Then press + / – buttons on the device or buttons on the remote controller to change the values. The following pictures are the setting displays of different modes.

1. OSDYPbPr/HDMI/SDI setting menu

2. Miscellaneous setting menu under YPbPr/HDMI/SDI modes enter
   ( Note : SDI optional)

3. OSD AV setting menu (Video 1/Video 2)

Icon Description

Accessories

1. Remote control 1 piece
2. 12V DC adapter 1 piece
3. User manual 1 piece
4. HDMI cable (Optional). 1 piece

MAIN PARAMETERS

TROUBLESHOOTING

1. Only black-and-white display:
   Check whether the color saturation and brightness are properly setup.

2. Power on but no pictures:
   Check whether the cables of Video, HDMI, DVI (Digital Visual Interface), and/or SDI (optional) are correctly connected. Please use the standard power adapter coming with the product package. Improper power input may cause the device.

3. Wrong or abnormal colors:
   Check whether the cables are correctly and properly connected. Broken or loose pins of the cables may cause a bad connection.

4. Remote controller doesn’t work:
   Check whether the battery is well charged and properly installed into the device. The signal of the remote controller may interfered by some obstacles or obstructions.

5. When on the picture shows size error:
   Long press“MENU” to zoom in/out pictures automatically when receiving HDMI (High-Definition Multimedia Interface) signals.

6. Other problems:
   Please press the “MENU” button and choose to reset to manufactory default values.

NOTE
It is normal to see some bright lines appear on the screen when turn off the device.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>