DELVCAM DELV-12GSDI-15 4K 12G SDI Multiformat Monitor User Guide
- June 17, 2024
- Delvcam
Table of Contents
- DELVCAM DELV-12GSDI-15 4K 12G SDI Multiformat
- FAQ
- IMPORTANT SAFETY INSTRUCTIONS
- FEATURES
- INCLUDED ACCESSORIES
- SPECIFICATIONS
- MONITOR FRONT
- MONITOR REAR
- VOLUME OPERATION
- MENU OPERATION
- F1 – F4 USER DEFINABLE SHORTCUT BUTTONS
- Default options
- SETTINGS
- SDI SIGNAL CONNECTION
- TROUBLESHOOTING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DELVCAM DELV-12GSDI-15 4K 12G SDI Multiformat
IMPORTANT SAFETY INSTRUCTIONS
- Read the manual before using this product.
- Keep the manual for future reference.
- Do not place the display screen on the ground.
- Avoid heavy impact or dropping.
- Do NOT use chemical solutions to clean this product. Wipe with a clean soft cloth to maintain the brightness of the surface. Do not block vent holes.
- Follow the instructions when making adjustments.
- Unplug the power and remove the battery if you do not plan to use the monitor for an extended period of time.
FEATURES
- Multiple Viewing Options: Full Screen, Split, and Quad
- Embedded Audio Meter (SDI only): Displays numerical indicators and headroom levels
- Rack Mountable: Fits standard 19″ 6RU equipment rack
- Carrying Case: Rugged carrying case provides added protection, stability, and portability
INCLUDED ACCESSORIES
- Collapsible Sunshade
- Carrying Case
- 15V 4-Pin XLR Power Cable
- Battery Plate Bracket
- V-Mount Tally Connector Kit
SPECIFICATIONS
- Display Screen: 15.6 inch IPS LCD
- Backlight: LED
- Resolution: 3840×2160
- Contrast: 1000:1
- Aspect Ratio: 16:9
- Input Signal: 12G-SDI, 3G-SDI, HDMI 4K 60Hz, HDMI 1.4 4K 30Hz
- Output Signal: 12G-SDI, 3G-SDI Loop
- Audio: Audio Level Meter (SDI only), Headphone Jack, Speaker 1 Watt
- Input Voltage: 12-24VDC (XLR)
- Power Consumption: 34W
- Dimensions (LxHxD): Weight: 7.1 lb (6.5 lb with case) / 3.2 kg (2 kg with case)
SUNSHADE INSTALLATION
Place the sunshade on the outside edge of the carrying case and press
Velcro into place.
MONITOR FRONT
- Speaker
- SDI Select:
- SINGLE – 12G-SDI 1
- SINGLE – 12G-SDI 2
- SINGLE – 3G-SDI 3
- SINGLE – 3G-SDI 4
- 2SI – Dual-Link 2SI
- 2SI – Quad-Link 2SI
- SQUARE – Quad-Link Square Division Mode
- HDMI – Select Input
- MENU/RETURN – Select options in the menu. Before entering the menu, press once to activate volume, press again to scroll through options.
- MENU – Select options in the menu.
- EXIT – Back or exit
- F1-F4 User-definable buttons. Default function options: F1 Display Mode, F2 Display Rotate, F3 Safety Marker, F4 Aspect
- Power Indicator Light: Red – Standby, Green – Working
- Earphone Jack
MONITOR REAR
- Carrying handle
- Strain relief bar
- USB port – FACTORY USE ONLY
- TALLY input
- SDI input (BNC)
- SDI output (BNC) – corresponds to SDI input
- HDMI input:
- HDMI 1: HDMI 2.0, 4K 60Hz
- HDMI 2, 3, & 4: HDMI 1.4, 4K 30Hz
- 15VDC power supply XLR connector
- Power Switch:
Pin number| Signal
---|---
GND| +15V
VOLUME OPERATION
Use the volume buttons for volume control.
MENU OPERATION
Turn the power ON. Press the MENU button to access first-level options:
- Picture Functions
- Display Mode
- Display Settings
- Input Audio
- System Information
Use the buttons to highlight the desired option. Press MENU button to confirm. Press EXIT button to return / exit menu.
F1 – F4 USER DEFINABLE SHORTCUT BUTTONS
Press and hold any one of the 4 buttons until the shortcut menu appears.
Current option will be highlighted in white. Using the buttons, cycle through
the options, which will be yellow. Unavailable options will be gray. Press the
MENU button to set the selected option.
FAQ
Q: Can I use chemical solutions to clean the product?
A: No, do not use chemical solutions to clean this product. Wipe with a
clean soft cloth to maintain the brightness of the surface.
Q: How do I install the sunshade?
A: Place the sunshade on the outside edge of the carrying case and press
Velcro into place.
Q: What are the available input signals?
A: The available input signals are 12G-SDI, 3G-SDI, HDMI 4K 60Hz, and HDMI
1.4 4K 30Hz.
IMPORTANT SAFETY INSTRUCTIONS
- Read manual before using this product.
- Keep manual for future reference.
- Do not place the display screen on the ground.
- Avoid heavy impact or dropping.
- Do NOT use chemical solutions to clean this product. Wipe with a clean soft cloth to maintain the brightness of the surface.
- Do not block vent holes.
- Follow the instructions when making adjustments.
- Unplug the power and remove the battery if you do not plan to use the monitor for an extended period of time.
FEATURES
-
4K 12G-SDI Ultra-HD Resolution
Ultra HD 4K screen, 3840×2160 resolution -
Multiple Viewing Options
Full Screen, Split, and Quad -
Embedded Audio Meter—SDI Only
Displays numerical indicators and headroom levels -
Rack Mountable
Fits standard 19″ 6RU equipment rack -
Carrying Case
Rugged carrying case provides added protection, stability, and portability.
INCLUDED ACCESSORIES
- Collapsible Sunshade
- Carrying Case
- 15V 4-Pin XLR Power Cable
- Battery Plate Bracket
- V-Mount
- Tally Connector Kit
SPECIFICATIONS
Display Screen: | 15.6 inch IPS LCD |
---|---|
Backlight: | LED |
Resolution: | 3840×2160 |
Brightness: | 330cd/m² |
Contrast | 1000:1 |
Aspect Ratio: | 16:9 |
Viewing Angle: | 176°/ 176°(H/V) |
Input Signal: | 12G-SDI, 3G-SDI, HDMI 4K 60Hz, HDMI 1.4 4K 30Hz |
Output Signal: | 12G-SDI, 3G-SDI Loop |
Audio: | Audio Level Meter (SDI only)/Headphone Jack /Speaker 1 Watt |
Input Voltage: | 12-24VDC (XLR) |
Power Consumption: | 34W |
Dimensions (LxHxD): | 15.3×10.5×1.5 in (20.6x12x6.7 in with case) 389×267×38mm |
(524 x 305 x 170mm with case)
Weight:| 7.1 lb (6.5 lb with case)
3.2 kg (2 kg with case)
SUNSHADE INSTALLATION
Place the sunshade on the outside edge of the carrying case and press Velcro into place.
MONITOR FRONT
-
Speaker
-
SDI Select:
-
SINGLE—12G-SDI 1, 12G-SDI 2, 3G-SDI 3, 3G-SDI 4
-
2SI—Dual-Link 2SI, Quad-Link 2SI
-
SQUARE—Quad-Link Square Division Mode
-
HDMI—Select Input
-
MENU/RETURN
-
◄ Select options in the menu. Before entering the menu, press once to activate volume, press again to scroll through options.
-
► Select options in the menu.
-
EXIT Back or exit
-
F1-F4 User definable buttons Default function options:
F1 Display Mode, F2 Display Rotate, F3 Safety Marker, F4 Aspect -
Power Indicator Light
Red: Standby, Green: Working -
Earphone Jack
MONITOR REAR
-
Carrying handle
-
Strain relief bar
-
USB port—FACTORY USE ONLY
-
TALLY input
-
SDI input (BNC)
-
SDI output (BNC) – corresponds to SDI input
-
HDMI input
HDMI 1: HDMI 2.0, 4K 60Hz
HDMI 2, 3, & 4: HDMI 1.4, 4K 30Hz -
15VDC power supply XLR connector
-
Power Switch
VOLUME OPERATION
Use the buttons for volume control.
MENU OPERATION
Turn the power ON. Press the “MENU“ button to access first level options:
- Picture
- Functions
- Display Mode
- Display Settings
- Input
- Audio
- System
- Information
Use buttons to highlight the desired option. Press the “MENU” button to confirm. Press “EXIT” button to return / exit menu
F1 – F4 USER DEFINABLE SHORTCUT BUTTONS
Press and hold any one of the 4 buttons until the shortcut menu appears.
Current option will be highlighted in white.
Using the buttons, cycle through the options, which will be yellow,
unavailable options will be gray. Press the “MENU”
button to set the selected option.
Available options: center marker, safety marker, aspect ratio, under scan,
check field, image freeze, peaking, display mode
and image flip.
Default options
- F1:Display Mode
- F2:Display Rotate
- F3:Safety Marker
- F4 : Aspect
SETTINGS
Picture
| Brightness| 0-100
---|---|---
Contrast| 0-100
Saturation| 0-100
Hue| 0-100
Sharpness| 0-4
Temperature| 9300, 7500, 6500, 5800, User
Backlight| 0-100
Functions
| Center Marker| ON, OFF
Safety Marker| OFF, 95%, 93%, 90%, 88%, 85%, 80%
Aspect Marker| Full,17:9, 16:9, 4:3,1.85:1,2.35:1
Aspect| Full,17:9, 16:9, 4:3,1.85:1,2.35:1
Underscan| ON, OFF
Pixel to Pixel| ON, OFF
Check Field| OFF, Red, Green, Blue
Freeze Input| ON, OFF
Peaking| ON, OFF (image edge enhancement)
False Color| ON, OFF
Display Mode| 1P, 2P LR, 2P TB, 2P PIP, 4P
Display Settings
| Display Rotate| 0°, 90°, 180°, 270°, available in single display
Display Mirror| OFF, L/R, U/D, available in dual display
Select Region| Set to region
Input| SDI 1, SDI 2 , SDI 3 , SDI 4, 2SI, SQUARE, HDMI 1, HDMI 2, HDMI 3, HDMI
4
Audio
| Volume| 0-100
Audio Level Meter—SDI ONLY| CH0&CH1, CH2&CH3, CH4&CH5, CH6&CH7, CH8&CH9,
CH10&CH11, CH12&CH13, CH14&CH15 (SDI ONLY)
System
| Reset| Resets to default
Menu Time| 5-60s
OSD H Position| 0-100
OSD V Position| 0-100
Language| English, Chinese
Transparency| 0-255
OSD Rotate| 0°, 90°, 270°
Border Width| 0-10
Border Color| R, G, B, W
Info| Displays current information
SDI SIGNAL CONNECTION
Input Signals
- Up to 2-channel, single link 12G-SDI
- Up to 4-channel 3GHD-SDI
- 1 channel quad-link 3G-SDI
Refer to the tables below for the appropriate connectors for each signal.
12G-SDI Single Link Signal
Connector | Input Signal |
---|---|
SDI 1 | 12G-SDI |
SDI 2 | 12G-SDI |
3G-SDI Dual Link Signal Interleave
Connector | Input Signal |
---|---|
SDI 1 | 3G-SDI Link 1 |
SDI 2 | 3G-SDI Link 2 |
3G-SDI Dual Link Signal Square Division
Connector | Input Signal |
---|---|
SDI 1 | Sub Image 1, Upper Left Screen/Sub Image 2, Lower Left Screen |
SDI 2 | Sub Image 3, Upper Right Screen/Sub Image 4, Lower Right Screen |
Quad Link 3G/HD-SDI Signal Interleave
Connector | Input Signal |
---|---|
SDI 1 | 3G-SDI Link 1 |
SDI 2 | 3G-SDI Link 2 |
SDI 3 | 3G-SDI Link 3 |
SDI 4 | 3G-SDI Link 4 |
12G-SDI Single Link Signal Square Division
Connector | Input Signal |
---|---|
SDI 1 | Sub Image 1, Upper Left Screen |
SDI 2 | Sub Image 2, Lower Left Screen |
SDI 3 | Sub Image 3, Upper Right Screen |
SDI 4 | Sub Image 4, Lower Right Screen |
Square Division Screen View
Sub Image 1 Upper Left Screen
|
Sub Image 3 Upper Right Screen
---|---
Sub Image 2 Lower Left Screen
|
Sub Image 4 Lower Right Screen
Signal Formats
SDI-SDI| 525i, 625i| 4:2:2 YCbCr 10 bits|
---|---|---|---
| 1280×720 (23.98/24/25/29.97/30/50/59.94/60p)| 4:2:2 YCbCr 10bits|
HD-SDI| 1920×1080 / 2048×1080 (50/59.94/60i) (23.98/29.97/24/25/30p)|
| (23.98/29.97/24/25/30Psf)|
| 1920×1080/2048×1080 (47.95/48/50/59.94/60p)| 4:2:2 YCbCr 10bits| 3G-
LevelA/DL 3G-Level B
| 1920×1080/2048×1080 (50/59.94/60i) (23.98/24/25/29.97/30p)| 4:4:4 GBR
10bits| 3G-LevelA/DL 3G-Level B
| (23.98/24/25/29.97/30Psf)| 4:4:4 GBR+A 10bits|
| | 4:4:4 YCbCr 10bits|
| | 4:4:4 YCbCr+A 10bits|
| | 4:4:4 GBR 12bits|
3G-SDI| | 4:4:4 YCbCr 12bits|
1280×720 (23.98/24/25/29.97/30/50/59.94/60p)| 4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
| 3G-LevelA/DL 3G-Level B
| | 4:4:4 YCbCr 10bits|
| | 4:4:4 YCbCr+A 10bits|
| 1920×1080/2048×1080 (50/59.94/60i) (23.98/24/25/29.97/30p)
(23.98/24/25/29.97/30Psf)| 4:2:2 YCbCr 10bits| DS 3G-Level B
| 1280×720 (23.98/24/25/29.97/30P| 4:2:2 YCbCr 10bits| DS 3G-Level B
6G-SDI Single Link
| 3840×2160/4096×2160 (23.98/24/25/29.97/30p)| 4:2:2 YCbCr 10bits
---|---|---
1920×1080/2048×1080 (47.95/48/50/59.94/60p)| 4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
3840×2160/4096×2160 (47.95/48/50/59.94/60p)| 4:2:2 YCbCr 10bits
3840×2160/4096×2160 (23.98/24/25/29.97/30p)| 4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
12G-SDI Single Link
| 3840×2160/4096×2160 (47.95/48/50/59.94/60p)| 4:2:2 YCbCr 10bits
3840×2160/4096×2160 (23.98/24/25/29.97/30p)| 4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
HD-SDI Quad Link| 3840×2160/4096×2160 (23.98/24/25/29.97/30p)| 4:2:2 YCbCr
10bits
3G-SDI Dual Link 2SI| 3840×2160/4096×2160 (23.98/24/25/29.97/30p)| 4:2:2 YCbCr
10bits
3G-SDI Dual Link Square Division| 3840×2160/4096×2160 (23.98/24/25/29.97/30p)|
4:2:2 YCbCr 10bits
3G-SDI Quad Link Square Division
| 3840×2160/4096×2160 (47.95/48/50/59.94/60p)| 4:2:2 YCbCr 10bits
3840×2160/4096×2160 (23.98/24/25/29.97/30p)| 4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
3G-SDI Quad Link 2SI
| 3840×2160/4096×2160 (47.95/48/50/59.94/60p)| 4:2:2 YCbCr 10bits
3840×2160/4096×2160 (23.98/24/25/29.97/30p)| 4:4:4 GBR 10bits
4:4:4 GBR+A 10bits
4:4:4 YCbCr 10bits
4:4:4 YCbCr+A 10bits
4:4:4 GBR 12bits
4:4:4 YCbCr 12bits
4:2:2 YCbCr 12bits
TROUBLESHOOTING
- No Image
- Ensure that the power is on and the cables are properly connected.
- Use the standard power adapter that is included as improper voltage input may cause damage or injury.
- Incorrect or Abnormal Colors
- Ensure that the cables are properly connected.
- Check the signal source video output.
- Check Saturation for appropriate setting.
- Reset image ratio.
- Image Size Error
- Go to Menu/Function/Underscan to zoom in and out of pictures automatically for HDMI signals
- No Sound
- Press the HDMI button.
- Ensure that the cables are properly connected.
- Check volume control.
- HDMI 1 No Signal
- Activate the HDMI signal by pressing the HDMI 1 button for 3 to 5 seconds
- P.O. Box 720, Mount Marion, New York 12456 USA Office: 800.543.0909
- Fax: 845.246.0626
- Email: info@delvcam.com