audio-technica Line Gradient Large Diaphragm Condenser Microphone User Manual
- June 7, 2024
- Audio-Technica
Table of Contents
audio-technica Line Gradient Large Diaphragm Condenser Microphone
Thank you for purchasing this product. Before using the product, read through the user manual to ensure that you will use the product correctly. Please keep this manual for future reference.
Features
- Large-diaphragm condenser element and optimized circuitry deliver exceptional low-noise performance – ideal for film/TV production and broadcasting applications
- Overall length of 354.9 mm with a highly directional pickup pattern (BP28)
- Overall length of 567.9 mm with an extremely narrow, highly directional pickup pattern (BP28L)
- Transformer-coupled output provides smooth sonic character
- Extremely high sensitivity (BP28: -28 dBV / BP28L: -23 dBV), wide dynamic range (135 dB), and high-SPL capability (BP28: 143 dB / BP28L: 138 dB)
- Flat frequency response for accurate sound reproduction
- Rugged housing made of lightweight, structural-grade aluminum alloy
- Switchable 80 Hz high-pass filter and 10 dB pad
- Patented acoustic port design maintains directionality across the entire frequency range
Safety precaution
Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product
Cautions for the product
- Do not subject the product to strong impact to avoid malfunction.
- Do not disassemble, modify or attempt to repair the product.
- Do not handle the product with wet hands to avoid electric shock or injury.
- Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty place.
Notes on use
- Do not connect/disconnect the capsule with the preamplifier while the phantom power is being supplied.
- Do not touch circuit board of capsule and pins of preamplifier with bare hands
- In case you have to attach the holder to capsule not to preamplifier, attach it as the UP mark of the capsule faces upward. Be aware not to damage slit mesh of the capsule.
Connection procedure
Connect the output terminals of the microphone to a device that has a
microphone input (balanced input) compatible with a phantom power supply.
The output connector is an XLRM-type with polarity as shown in the figure
below.
This product requires 48 V DC phantom power.
Switch settings
To reduce the pickup of low frequency ambient noise (such as traffic, air-
handling systems, etc.), room reverberation and mechanically coupled
vibrations, turn ON ( ) the low-cut filter switch located on the side of the
product.
If audio input exceeds the maximum input sound level, set the pad switch to
-10 dB.
Specifications
| Element | Fixed-charge back plate, permanently polarized condenser |
|---|---|
| Polar pattern | Line + gradient |
| Frequency response | BP28: 20-19,000 Hz |
BP28L: 20-20,000 Hz
Low cut| 80 Hz, 18 dB/octave
Pad| -10 dB
Open circuit sensitivity| BP28: -28 dB (39.8 mV) (0 dB=1 V/Pa, 1 kHz)
BP28L: -23 dB (70.8 mV) (0 dB=1 V/Pa, 1 kHz)
Impedance| 250 ohms
Maximum input sound level| BP28: 143 dB SPL (1 kHz at 1% THD), 153 dB SPL
(When pad is on.) BP28L: 138 dB SPL (1 kHz at 1% THD), 148 dB SPL (When pad is
on.)
Noise| BP28: 8 dB SPL (A-weighted)
BP28L: 3 dB SPL (A-weighted)
Dynamic range| 135 dB (1 kHz at Max SPL)
Signal-to-noise ratio| BP28: 86 dB (1 kHz at 1 Pa, A-weighted)
BP28L: 91 dB (1 kHz at 1 Pa, A-weighted)
Phantom power requirements| 11-52 V DC, 3.4 mA
Switches| Low cut: on/off, Pad: on/of
Weight| BP28: 223 g (7.9 oz)
BP28L: 313 g (11 oz)
Dimensions| BP28: 354.9 mm (14.0”) long / BP28L: 567.9 mm (22.4”) long, 28.0
mm (1.1”) maximum body diameter
Output connector I| Integral 3-pin XLR-M type
Audio-Technica case style| BP28: SG6
BP28L: SG7
Included accessories| Windscreen (BP28:AT8170/BP28L:AT8169), holder (AT8470), stand adapter (3/8”-5/8”), carry case
• 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
For product improvement, the product is subject to modification without
notice.
Polar pattern
LEGEND
5dB /
SCALE IS 5 DECIBELS PER DIVISION
Frequency response
BP28
20–19,000 Hz
BP28L
20–20,000 Hz
Frequency in Hertz
LEGEND
|
0°, 50 cm
| 
|
0°, 50 cm, Low cut
---|---|---|---
Dimensions
Included accessories
Warranty
For USA Only
Warranty (Please be sure to read the notes below.)
End-User LIMITED WARRANTY information for the USA is available at www.audio- technica.com/usawarranties. You may also contact AudioTechnica U.S., Inc. to request a written copy of the Limited Warranty at 1-330-686-2600 or via mail at 1221 Commerce Drive, Stow, OH 44224.
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2018 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>