DELVCAM DELV-FPV-7 7 Inch FPV Monitor User Guide

DELVCAM DELV-FPV-7 7 Inch FPV Monitor

IMPORTANT SAFETY INSTRUCTIONS

• Please read User Guide before using this product.
• Please keep User Guide for future reference.
• Please read the cautions to prevent possible danger and loss of property.

FEATURES

• High resolution: 800×480;
• High brightness: 400cd/㎡;
• High contrast: 500:1;
• Dual 5.8GHz receivers for optional.

CAUTIONS

1. Please do not place the display screen towards the ground.
2. Please avoid heavy impact or drop onto the ground.
3. Please do NOT use chemical solutions to clean this product. Please wipe with a clean soft cloth to maintain the brightness of the surface.
4. Please do not block any vent hole.
5. Please follow the instructions and trouble-shootings to adjust the product. Other improper adjustment may result in damage. Any further adjustment must be performed or conducted by a qualified technician.
6. Please unplug the power and remove the battery if long-term no-use, or thunder weather.

PRODUCT DESCRIPTION

1. POWER: ON/OFF (Light turns to green when power on).
2. AV: Video & 5.8G switch.
3. VOL-: Volume down; value of menu option decrease.
4. VOL+: Volume up; value of menu option increase.
5. MENU: To activate OSD menu & main menu.
6. CH-: Item selection on menu.
7. CH+: Item selection on menu.
8. OUT: Video output interface
9. IN: Video input interface
10. Bracket mount
11. DC12V power input
12. NO USE
13. Frequency control (please refer to Part3)
14. Antenna port
15. Speaker
16. ESA Mounting interface

REMOTE CONTROL

• MUTE
  • NO USE
• Video & 5.8G switch
• ◄: Volume down or to adjust the value of function
• To switch display mode
• Power on / off
• NO USE
• NO USE
• ►: Volume up or to adjust the value of function
• To activate OSD menu
• NO USE
• NO USE

AERIAL PHOTOGRAPHY SIGNAL RECEIVER

Frequency Chart
Note: Dual receivers frequency: Band 3&4

0: ON; 1:OFF

Frequency / L.O.| CS1| CS2| CS3| S1| S2
Band 1
B1:5.865GHz/5.385GHz| 1| 1| 1| 0| 0
B2:5.845GHz/5.365GHz| 0| 1| 1| 0| 0
B3:5.825GHz/5.345GHz| 1| 0| 1| 0| 0
B4:5.805GHz/5.325GHz| 0| 0| 1| 0| 0
B5:5.785GHz/5.305GHz| 1| 1| 0| 0| 0
B6:5.765GHz/5.285GHz| 0| 1| 0| 0| 0
B7:5.745GHz/5.265GHz| 1| 0| 0| 0| 0
B8:5.725GHz/5.245GHz| 0| 0| 0| 0| 0
Band 2
C1:5.733GHz/5.253GHz| 0| 0| 0| 1| 0
C2:5.752GHz/5.272GHz| 1| 0| 0| 1| 0
C3:5.771GHz/5.291GHz| 0| 1| 0| 1| 0
C4:5.790GHz/5.310GHz| 1| 1| 0| 1| 0
C5:5.809GHz/5.329GHz| 0| 0| 1| 1| 0
C6:5.828GHz/5.348GHz| 1| 0| 1| 1| 0
C7:5.847GHz/5.367GHz| 0| 1| 1| 1| 0
C8:5.866GHz/5.386GHz| 1| 1| 1| 1| 0
Band 3
D1:5.705GHz/5.225GHz| 0| 0| 0| 0| 1
D2:5.685GHz/5.205GHz| 1| 0| 0| 0| 1
D3:5.665GHz/5.185GHz| 0| 1| 0| 0| 1
D4:5.645GHz/5.165GHz| 1| 1| 0| 0| 1
D5:5.885GHz/5.405GHz| 0| 0| 1| 0| 1
D6:5.905GHz/5.425GHz| 1| 0| 1| 0| 1
D7:5.925GHz/5.445GHz| 0| 1| 1| 0| 1
D8:5.945GHz/5.465GHz| 1| 1| 1| 0| 1
Band 4
A1:5.740GHz/5.260GHz| 0| 0| 0| 1| 1
A2:5.760GHz/5.280GHz| 1| 0| 0| 1| 1
A3:5.780GHz/5.300GHz| 0| 1| 0| 1| 1
A4:5.800GHz/5.320GHz| 1| 1| 0| 1| 1
A5:5.820GHz/5.340GHz| 0| 0| 1| 1| 1
A6:5.840GHz/5.360GHz| 1| 0| 1| 1| 1
A7:5.860GHz/5.380GHz| 0| 1| 1| 1| 1
 |  |  |  |  |

Frequency Control Demo

GENERAL transmitter setting with DELV-DUALFPV-7ss

Radio signal receiving antenna

1. Connected to the wireless receiving antenna port.
2. When a product with wireless module connected with antenna, and then connecting with flying camera system, you can receive the sound and image signals.

WIRING INSTRUCTIONS
Video output cable

1. Video output interface.
2. Yellow: video 1 output plug.
3. White: video 2 output plug.

Video input cable

1. Video input interface.
2. Yellow: video 1 input plug.
3. White: video 2 input plug.

MENU SETTING

1. VIDEO & 5.8G Switch
   Press “AV” button on device or video switch button on remote control to switch video mode after power on.

2. Volume
   Press “VOL- / VOL+” button on device or “◄/►” button on remote control to decrease or increase volume after power on.

3. MENU Operation
   Press “MENU” button on device or remote control to activate main menu options And then press to select option needs to adjust, option will be highlighted as yellow and operation tips displayed below. Press “CH- / CH+” button on device or “▲/▼” button on remote control to select menu option, and then press “VOL- / VOL+” button on device or “►/◄” on remote control to adjust option values.

(To reversal image up and down)

L/R| Normal, Right

(To reversal image left and right)

ZOOM| 16:9、4:3
S    AUTO| ON, OFF

VESA INSTALLATION INSTRUCTIONS FIGURE

ACCESSORIES
Standard accessories:

1. Sun Shade 1 piece
2. 12V DC adapter 1 piece
3. AV input cable 1 piece
4. AV output cable 1 piece
5. VESA battery plate 1 piece
6. Battery plate 2 Pieces
7. Remote control 1 piece
8. 5.8GHz wireless AV receiver 1 piece
9. Manual 1 copy

Optional accessories

1. 5.8GHz wireless AV receiver 1 piece
2. 5.8GHz omnidirectional antenna 1 piece
3. Shoe Mount (for camera only) 1 piece

PARAMETERS

TROUBLE SHOOTING

Only black & white picture

| Check the contrast, brightness, hue and color    are proper or not,and adjust

No picture

| Check      power      input      and connection.

Remote control doesn’t work

| Check if the battery installed properly or the battery is out. Remote signal interfered by some

obstruction.

Note : due to constant effort to improve products and product features, specifications may change without notice.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>