DELVCAM DELV-RCLCD Dual 7 Inch LCD Monitor Instruction Manual
- June 17, 2024
- Delvcam
Table of Contents
DELVCAM DELV-RCLCD Dual 7-Inch LCD Monitor
Product Information
Specifications
- Model: DELV-RCLCD
- Type: Dual LCD Monitor
- Input Voltage: 12VOLT DC
- Power Consumption: 1.2 Amps
- Video Inputs: Front and Rear BNC video inputs
- Video Outputs: Looping output based on selected input
- Dimensions: 19″ W x 5.25″ H x 3.3″ D
- Certifications: FCC Certified, ROHS (Lead-Free) Manufacturing
Features
- Low profile design
- Rack mount with grip rails
- Easy menu operation
- Front and rear video inputs with looping out
Applications
- Camera confidence monitoring
- Media signal playout
- Control room monitoring
- Security monitoring
- Mobile production environments
- Multi-media facilities
- Houses of worship control rooms
- Educational studios
Safety Precautions
Please read and follow the safety precautions mentioned in the user manual
to ensure safe and proper usage of the DELV-RCLCD.
Product Usage Instructions
Setup Instructions
Follow the steps below to set up the DELV-RCLCD:
- Ensure the DELV-RCLCD is placed in a suitable location, such as a rack mount enclosure.
- Connect the power supply to the 12VOLT DC single power port on the DELV-RCLCD. Alternatively, you can use any 12VOLT DC source, such as batteries or 12VOLT power rails.
- Connect your video sources to the front and rear BNC video inputs. The front and rear inputs have looping outputs in the rear.
- Use the front panel controls to select the desired input. The selected input will be looped to the rear output connector.
- If the rear output is not being used, make sure to terminate it with the provided 75 ohm terminator. Failure to do so may result in distorted color and image.
FAQ
Q: What is the input voltage of the DELV-RCLCD?
A: The DELV-RCLCD operates on 12VOLT DC input voltage.
Q: Can I power the DELV-RCLCD using batteries?
A: Yes, you can power the DELV-RCLCD using any 12VOLT DC source, including
batteries.
Q: What are the dimensions of the DELV-RCLCD?
A: The dimensions of the DELV-RCLCD are 19″ W x 5.25″ H x 3.3″ D.
Q: How do I select the input on the DELV-RCLCD?
A: You can use the front panel controls to select the desired input.
Q: Do I need to terminate the rear output if it is not being used?
A: Yes, if the rear output is not being used, it must be terminated with
the provided 75-ohm terminator to avoid distorted color and image.
The DELV-RCLCD provides cost effective monitor display for video applications where good no-frills visual quality is the requirement. Housed in a very lightweight anodized aluminum 19” rack mount enclosure the DELVRCLCD is perfect for camera monitoring, security applications and Outdoor Broadcasting (OB) operations. It operates on 12VOLTS @ 1.2Amps and features front and rear BNC video inputs that both have a tracking LOOP OUTPUT in the rear. A 12VOLT DC power supply is provided but the DELV-RCLCD can be powered by any 12VOLT DC source including batteries or 12VOLT power rails.
FEATURES
- 12 VOLT DC SINGLE POWER PORT OPERATION
- LOW PROFILE: SUPER THIN DEPTH
- RACK MOUNT WITH GRIP RAILS
- EASY MENU OPERATION
- FRONT & REAR VIDEO INPUTS WITH LOOPING OUT
APPLICATIONS
- CAMERA CONFIDENCE MONITORING
- MEDIA SIGNAL PLAYOUT
- CONTROL ROOM MONITORING
- SECURITY MONITORING
- MOBILE PRODUCTION ENVIRONMENTS
- MULTI-MEDIA FACILITIES
- HOUSES OF WORSHIP CONTROL ROOMS
- EDUCATIONAL STUDIOS
SPECIFICATIONS
-
VIDEO INPUTS:
-
FRONT IN: BNC CONNECTORS: LOOPING COMPOSITE VIDEO
1Vpp into 75 ohms (termination required) -
REAR IN: BNC CONNECTORS: LOOPING COMPOSITE VIDEO 1Vpp into
75 ohms (termination required)
SELECTED INPUT LOOPED TO REAR OUTPUT CONNECTOR
INTO 75 OHMS
-
-
CONTROLS :
- FRONT: FRONT-REAR INPUT SELECT, POWER, MENU,
MENU-UP/DOWN, MENU LEFT/RIGHT
- FRONT: FRONT-REAR INPUT SELECT, POWER, MENU,
-
POWER: 12VOLT DC @ 1.2 AMPS: 2.1 mm Input Jack
-
TEMP: 0 deg to 40 deg C
-
DIMENSIONS: 19” W x 5.25H (3RU) x 3.3” D
FCC CERTIFIED, ROHS (LEAD-FREE) MANUFACTURING
NOTE : The FRONT and REAR panel select switch controls which BNC is active as an input. Each LCD has a VIDEO OUT in the rear which is a looped output based on which input is selected from the front panel FRONT-REAR switch. If the OUTPUT is not being used it MUST be terminated with the provided 75 ohm terminator. Failure to do this will result in distorted color and image.
SAFETY PRECAUTIONS
- To prevent fire or shock hazard, do not expose this equipment to an environment of high humidity and/or dust. Do not use in an unprotected outdoor installation or any area classified as overly damp or wet.
- The temperature for installation should be kept between 0°C ~ 60°C. Avoid direct sunlight exposure or extreme changes of temperature over a short period of time.
- Do not disassemble the unit or put it on an unstable base
- Do not drop it and avoid heavy impact.
- Ventilation: Any openings in the enclosure are provided for ventilation and to ensure reliable operation of the unit and to protect it from overheating. These openings, if any, must not be blocked or covered. This unit should not be placed in a built-in installation unless proper ventilation is provided.
- Cleaning: Unplug the unit from the mains outlet before cleaning. Do not use liquid cleaners or aerosol cleaners, only use a damp cloth.
- Do not overload outlets and extension cords as this may result in a risk of fire or electric shock.
- Enclosure Entry of any kind is dangerous. Never push objects of any kind, including liquids, into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
- Service: Do not attempt to open or service this unit yourself as opening or removing covers may expose you to dangerous voltage of other hazards.
- There are no user-serviceable parts inside the unit. If the unit requires service please contact your authorized dealer, or an authorized repair service company.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>