DELTA T50001 Body Spray User Manual
- June 17, 2024
- Delta
Table of Contents
DELTA T50001 Body Spray
Write purchased model number here.
You may need
Installation Instructions
-
Remove plasterguard (1) and test plug (2) from the rough body.
-
Install the body spray cartridge (1) into the body. Secure with the bonnet nut (2).
Note: Make sure the o-ring (3) is present on the outside of the cartridge prior to installation.
-
A. The body spray can now be tested to look for any leakage prior to installing the trim.
B. T50001: Thread the escutcheon (1) onto the bonnet nut (2).
T50050: Place escutcheon (1) over body spray and bonnet nut (2). Slide against wall and secure with set screw (3).
T50001: Snap the decorative cover (1) over the spray body cartridge (2) being careful to align the 5 fingers (3) in the cover with the 5 slots (4) in the spray body.
T50050: Find arrow (1) on the back side of the decorative cover (2).
Position the cover so the arrow aligns with either the right or left side of the spray body (3). Snap the decorative cover (2) over the spray body cartridge (3) being careful to align the 5 fingers (4) in the cover with the 5 slots (5) in the spray body.
Specify Finish Note: Replacement parts for chrome models have no suffix.
TROUBLESHOOTING TIPS
-
After installation, if there is too much of a gap between the decorative cover and the escutcheon, this is caused by the rough body being in the wrong position relative to the finished wall. To resolve this, disassemble the body spray. Remove the rough body, and increase the distance from the finished wall to the end of the pipe nipple (See illustration 2). Reinstall the components.
-
After installation, if the decorative cover rubs on the escutcheon when rotating the body spray, this is caused by the body being in the wrong position relative to the finished wall. To resolve this, disassemble the body spray. Remove the rough body, and decrease the distance from the finished wall to the end of the pipe nipple.
(See illustration 2) Reinstall the components. -
Low flow: If flow is disrupted for very long, there may be blockage on the screen provided with the rough body. Disassemble the body spray and remove the rough body. Inside the female IPS portion of the body is a removable screen. Remove the screen and clean. BE SURE TO REINSTALL THE SCREEN. Reinstall the body spray and test.
CLEANING AND CARE
Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
Note: This bodyspray is designed to flow less than a typical body spray. The flow rate for this spray should be approximately 1.6 GPM. If the flow is significantly lower than 1.6 GPM, and cleaning the screen did not improve the flow, contact Delta Faucet® for assistance.
Limited Warranty on Delta® Faucets
Parts and Finish
All parts (other than electronic parts and batteries) and finishes of this
Delta® faucet are warranted to the original consumer purchaser to be free from
defects in material and workmanship for as long as the original consumer
purchaser owns the home in which the faucet was first installed or, for
commercial users, for 5 years from the date of purchase.
Electronic Parts and Batteries (if applicable)
Electronic parts (other than batteries), if any, of this Delta® faucet are
warranted to the original consumer purchaser to be free from defects in
material and workmanship for 5 years from the date of purchase or, for
commercial users, for one year from the date of purchase. No warranty is
provided on batteries.
Delta Faucet Company will replace, FREE OF CHARGE, during the applicable warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use and service. If repair or replacement is not practical, Delta Faucet Company may elect to refund the purchase price in exchange for the return of the product. These are your exclusive remedies.
Delta Faucet Company recommends using a professional plumber for all installation and repair. We also recommend that you use only genuine Delta® replacement parts.
Delta Faucet Company shall not be liable for any damage to the faucet resulting from misuse, abuse, neglect or improper or incorrectly performed installation, maintenance or repair, including failure to follow the applicable care and cleaning instructions.
Replacement parts may be obtained by calling the applicable number below or by writing to:
In the United States and Mexico:
Delta Faucet Company
Product Service
55 E. 111th Street
Indianapolis, IN 46280
1-877-345-BRIZO (2749)
[email protected]
In Canada:
Masco Canada Limited, Plumbing Group
Technical Service Centre
350 South Edgeware Road
St. Thomas, Ontario, Canada N5P 4L1
1-877-345-BRIZO (2749)
[email protected]
Proof of purchase (original sales receipt) from the original purchaser must be
made available to Delta Faucet Company for all warranty claims unless the
purchaser has registered the product with Delta Faucet Company.
This warranty applies only to Brizo® faucets manufactured after January 1,
1995 and installed in the United States of America, Canada and Mexico.
DELTA FAUCET COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES (INCLUDING LABOR CHARGES) FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THE FAUCET. Some states/provinces do not allow the
exclusion or limitation of special, incidental or consequential damages, so
these limitations and exclusions may not apply to you.
This warranty gives you special legal rights. You may also have other rights
which vary from state/province to state/province.
This is Delta Faucet Company’s exclusive written warranty and the warranty is not transferable.
If you have any questions or concerns regarding our warranty, please view our Warranty FAQs at www.deltafaucet.com, email us at [email protected] or call us at the applicable number above.
© 2013 Masco Corporation of Indiana
