Trudian P3204GF International standard PoE Switch User Guide
- June 17, 2024
- Trudian
Table of Contents
Trudian P3204GF International standard PoE Switch
Applicable Model: TD-P3308GF、TD-P3204GF
- Version : 1.0
- Date : August 2023
Product Description
TD-P3204GF series unmanaged PoE switches have 5 Gigabit electrical ports + 1
Gigabit SFP fiber slot, of which 1-4 Gigabit ports support IEEE 802.3af/at
standard PoE power supply, and the single-port PoE power can reach 30W. As a
PoE power supply device, it can automatically detect and identify standard-
powered devices and supply power to them through network cables. It can supply
power to POE terminal equipment such as wireless AP, network camera, Internet
phone, video door intercom, etc. through the network cable to meet the network
environment that requires a high-density PoE power supply. It is suitable for
hotels, campuses, factory dormitories, and small and medium-sized enterprises
to form an economical Efficient network.
Non-network management model, plug and play, no need to configure, easy to use
and maintain;
Product Features
Full Gigabit ports
- Support the combination of “Ethernet port + Gigabit optical port”, which is convenient for users to network flexibly and meet the networking needs of various scenarios;
- All ports support non-blocking wire-speed forwarding for smoother transmission.
- Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
Intelligent PoE power supply function
- Four 10/100/1000Base-T RJ45 ports support PoE power supply to meet the needs of PoE power supply in scenarios such as security monitoring, teleconferencing systems, and wireless coverage.
- Comply with IEEE 802.3af/at PoE power supply standard, automatically identify PoE devices for power supply, without damaging non-PoE devices, and the maximum PoE output power of a single port is 30W.
- The PoE port supports a priority mechanism. When the remaining power is insufficient, the power supply of the high-priority port is given priority to avoid overloading of the device.
Equipment is stable and reliable, easy to operate
- Low power consumption design of the host, metal shell, and super heat dissipation, to ensure stable operation of the product.
- A highly redundant design power supply is used to provide long-term stable PoE power output.
- The equipment meets the national CCC standard, fully complies with CE, FCC, and RoHS safety regulations, and is safe and reliable to use.
- Users can easily understand the working status of the device through the power indicator (PWR), port status indicator (Link), and PoE work indicator (PoE).
Product Specification
Model | TD- P3204GF | TD- P3308GF |
---|
port characteristics
Fixed Port
| Four 10/100/1000Base-T POE ports (Data/Power)
One 10/100/1000Base-T RJ45 network port
One 1000Base-X uplink SFP optical port
slot (Data)
| Eight 10/100/1000Base-T POE ports (Data/Power)
Two 10/100/1000Base-T RJ45 network ports
One 1000Base-X uplink SFP optical port
slot (Data)
Network port
characteristics
| 1-5/1-10 ports 10/100/1000Base-T automatic detection, full/half duplex MDI/MDI-X
adaptive
Twisted pair transmission
| 10BASE-T:Cat3,4,5 UTP(≤100 meter)
100BASE-TX:Cat5 or later UTP(≤100 meter) 1000BASE-T:Cat5e or later UTP(≤100 meter)
Optical port characteristics
| Gigabit SFP optical fiber interface, the default is not equipped with optical modules,
which need to be purchased separately, (optional order mode/multimode, single fiber/dual fiber optical modules, LC)
fiber optic cable
| Multi mode :850nm 0~550M ,
Singlemode :1310nm 0~40KM , 1550nm 0~
---|---
Chip parameters
Network protocol
| IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u 100Base-TX;
IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X;
IEEE802.3x
forwarding mode| Store-and-forward (full wire speed)
Backplane Bandwidth| 12Gbps (non-blocking)| 22Gbps (non-blocking)
Packet forwarding
rate@64byte
| ****
8.93Mpps
| ****
16.37Mpps
MAC address table| 2K| 4K
packet forwarding
cache
| ****
2M
jumbo frame| 9.2K
LED indicator
| Power indicator: PWR (green); Network indicator: Link (green); POE work indicator: PoE
(green)
PoE and Power Characteristics
POE power supply
standard
| 1-4 ports support IEEE802.3af/at
standard POE power supply
| 1-8 ports support IEEE802.3af/at standard
POE power supply
power pin
| ****
By default, only 1/2(+), 3/6(-) 4-core power supply is supported
Maximum single port
POE power
| ****
30W, standard IEEE802.3af/at
Total power/input
voltage
| ****
65W (AC100-240V)
| ****
120W (AC100-240V)
Power consumption
| Standby power consumption: <4W; full
load power consumption: <65W
| Standby power consumption: <6W; full load
power consumption: <120W
Input voltage and
interface
| Built-in switching power supply AC:
100~240V 50-60Hz 1.0A
| Built-in switching power supply AC: 100~
240V 50-60Hz 2.2A
Physical Specifications
Working
temperature/humidity
| ****
-20~+55°C; 5%~90% RH non-condensing
storage
temperature/humidity
| ****
-40~+85°C; 5%~95% RH non-condensing
Appearance size
(LWH)
| ****
20011844mm
Net weight/Gross
weight
| ****
<0.6kg / <1kg
| ****
<0.8kg / <1.2kg
installation method| Desktop, wall-mounted installation
Product Certification
Lightning Protection/Protection
Level
| ****
Port lightning protection: 4KV 8/20us; Protection class: IP30
Model| Device information| Power
supply
---|---|---
TD-P3204GF
| Unmanaged 5 10/100/1000M RJ45 ports + 1 1000M SFP optical slot Ethernet PoE switch, 1-4 ports support IEEE 802.3af/at international
standards. Built-in 65W power supply.
| ****
65W
TD-P3308GF
| Unmanaged 10 10/100/1000M RJ45 ports + 1 1000M SFP optical slot Ethernet PoE switch, 1-8 ports support IEEE 802.3af/at
international standards. Built-in 120W power supply.
| ****
120W
www.trudian.com/en/
HQ Add: Farbell Technology Park,Yixian Road, Nanlang, Cuiheng New District,
Zhongshan City, Guangdong Province, China. Zip Code:528451
Phone : +86 0760 – 23689666
E-mail: sales@trudian.com
If the problem is not solved properly,please send the mail to:
support@trudian.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>