DLHC1455W 4.2 cu. ft. Compact White Electric Dryer with Dual Inverter

HeatPump

22 OPERATION
OPERATION
Before Use
WARNING injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.

Operation Overview
1 Ensure the lint filter and water container are clean.
clean. When the filter is full with lint, drying times will be longer than usual.
ntainer and empty the condensed water. When the water container is full, the appliance may stop during the cycle.
NOTE E icon may appear on the
control panel to indicate that the water container needs to be emptied.

5 Press the Start/Pause button to start the drying cycle.
6 After the drying cycle has finished, open the door and unload the clothes. CAUTION
7 Press the Power button to turn the appliance off.
8 Clean the lint filter and empty the water container.

2 Place the clothes into the drum after sorting and close the door.
is pushed entirely into the drum and away from the door seal area. Clothing that gets stuck between the door and seal may be damaged or damage the seal.
rted by fabric types and desired dryness level.
d belts of clothes should be well tied and secured before being put into the drum.
3 Press the Power button to turn the appliance on.
Power button may light up to indicate that the appliance is ready to dry.
4 Choose a drying cycle by turning the cycle selector knob.
Start/Pause button without choosing a cycle, the appliance will proceed with the Normal cycle. Please refer to the cycle table for detailed information.

9 To help prevent odors, leave the dryer door slightly open to help air out the drum after use.
WARNING w children or animals to
climb inside the appliance. They could be injured or damage the appliance.
NOTE
This cool down period helps prevent damage to clothing.
ture and a small room may both increase drying time as well as energy consumption.

ENGLISH

Loading the Dryer
NOTE
drying performance and most efficient energy usage.
General Tips
these items from snagging or tangling on other clothes.
NOTE
overload the dryer; clothes require room to tumble and dry properly.
Grouping Similar Items
For the best drying results, and to reduce the possibility of damage to clothing, sort clothes into loads that can be dried with the same drying cycle. Different fabrics have different care requirements, and some fabrics will dry more quickly than others.
Woolen Items
woolen items in a dryer. After the cycle, the items may still be damp. Do not repeat the cycle. Pull the items to their original shape if needed and lay them flat to finish drying.

OPERATION 23
– Curtains and tablecloths – Bath mats
Fiberglass es in your dryer. Glass
particles left in the dryer could be picked up by your clothes the next time you use the dryer and irritate your skin.
Fabric Care Labels rding to care labels,
size, and fabric type. Do not overload the dryer. This will save energy and time and give the best drying performance.

Fabric Care Labels
Many articles of clothing include a fabric care label. Using the chart below, adjust the cycle and option selections to care for your clothing according to the manufacturer’s recommendations.

Label

Tumble Dry Directions
Dry

Normal

Permanent Press / Wrinkle Resistant
Gentle / Delicate

Woven and Loopknit Materials

Do not tumble dry

depending on quality.
Permanent Press and Synthetics yer. Take out permanent
press items as soon as the dryer stops to reduce wrinkles.
Baby Clothes and Nightgowns

Do not dry (used with do not wash)

Label

Heat Setting Directions
High

Medium

Rubber and Plastics

Low

rubber or plastics such as: – Aprons, bibs and chair covers

No Heat / Air

24 OPERATION
Control Panel
Control Panel Features

a Power Button

e appliance on. Press again to turn the appliance off.

NOTE

Power button during a cycle will cancel that cycle and any load settings will be lost.

b Cycle Selector Knob sired cycle. Once the desired cycle has been selected, the standard
presets will be shown in the display. On Manual Dry cycles, these settings can be adjusted using the cycle modifier buttons anytime before starting the cycle.
c Start/Pause Button the selected cycle. If the appliance is running, use this button to pause the
cycle without losing the current settings.
NOTE Start/Pause button to resume a cycle within a certain time, the appliance turns
off automatically and all cycle settings are lost.

d Extra Options and Functions / Cycle Modifier Buttons

each cycle.

ct the desired options for the selected cycle. Not all options are available for

Remote Start

– With the LG ThinQ app, you can use a smartphone to control your appliance remotely.

Wi-Fi

– Press and hold the Wrinkle Care button for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.

e Time and Status Display
estimated time remaining, options, and status messages for the appliance. When the appliance is turned on, the default settings in the display will illuminate.

Time and Status Display

OPERATION 25

ENGLISH

a Water Full Indicator
E lights up at the beginning of a cycle to remind you to empty the water container before drying. It
also lights up when the water container is full and needs to be emptied.

b Lint Filter Status Indicator K lights up at the beginning of the cycle to remind you to check the lint filter. It also lights up if the lint filter needs to be cleaned or is missing.
– If the lint filter is not inserted, the icon will light up and the appliance will not operate.

c Cycle Status Indicators @ lights up when the appliance is in the drying stage.
= lights up when the appliance is in the cool down stage. After = lights up, the appliance can
operate for up to 20 minutes.

d Estimated Time Remaining

e estimated drying time for the selected cycle is displayed. This time will change if you select extra options for the cycle.

optimal results.

ate as the appliance recalculates drying time for

e q lights up when the button and end-of-cycle sounds are turned off.

f i lights up when the control panel is locked.

g f lights up when the appliance is connected to Wi-Fi network at home.

h w lights up when the remote control feature is activated.

i O lights up while the Drum Care function is operating.

26 OPERATION

Drying Cycles
Turn the knob or press the button to select the desired cycle. When you select a drying cycle the light for the corresponding drying cycle will turn on.
Sensor Dry Cycles
Sensor dry cycles utilize LG’s unique dual sensor system to detect and compare the moisture level in clothes and in the air and adjust the drying time as needed to ensure superior results. The appliance automatically sets the dryness level and temperature at the recommended setting for each cycle. The estimated time remaining will be shown in the display.

Cycle Description
Dry Level Dry Mode

Normal

Use this cycle for drying all normal items such as cotton, linen, shirts, jeans or mixed loads, except delicate fabrics such as wool or silk.

Default: Normal

Available: All

Default: Energy Saver

Available: All

Cycle Description
Dry Level Dry Mode

Heavy Duty

Use this cycle for drying heavy-duty clothes like jeans or garments that need extra drying.

Not adjustable

Default: Energy Saver

Available: Energy Saver

Cycle Description
Dry Level Dry Mode

Bulky/Large

Use this cycle for drying blankets or bulky items such as pillows, blankets, comforters, sheets or pet bedding.

Not adjustable

Default: Normal

Available: Normal

Cycle Description Dry Level Dry Mode

Small Load

Use this cycle for drying light or small items. (up to 3 items)

Not adjustable

Default: Normal

Available: Normal

Cycle Description Dry Level Dry Mode

Use this cycle for drying towels. Not adjustable Default: Energy Saver

Towels Available: Energy Saver

Cycle Description Dry Level Dry Mode

Sportswear

Use this cycle for drying special garments for sports and outdoor wear.

Not adjustable

Default: Energy Saver

Available: Energy Saver

OPERATION 27

ENGLISH

Cycle Description Dry Level Dry Mode
Cycle Description
Dry Level Dry Mode
Cycle Description
Dry Level Dry Mode
Cycle Description Dry Level Dry Mode

Antibacterial

Using this cycle helps to reduce bacteria.

Not adjustable

Default: Normal

Available: Normal

Delicates

Use this cycle for drying dress shirts/blouses, nylons, lingerie, or sheer and lacy clothes which can easily be damaged.

Default: Normal

Available: All

Default: Normal

Available: Normal

Wool

Use this cycle for drying shrinkable woolen or hand-washable items requiring delicate care.

Not adjustable

Default: Energy Saver

Available: Energy Saver

Perm. Press

Use this cycle to minimize wrinkles when drying tablecloths or wrinkle-free clothes.

Default: Normal

Available: All

Default: Normal

Available: Normal

Manual Dry Cycles
Use Manual Dry cycles to select a specific amount of drying time and a drying temperature. When a Manual Dry cycle is selected, the actual time remaining in your cycle appears on the display. You can change the actual time in the cycle by pressing the More Time or Less Time buttons.

Cycle Description

Rack Dry
Use this cycle to dry clothes without tumble action. It is suitable for all fabrics that need refreshing.

Cycle Description

Heated Dry Use this cycle to dry clothes that can be tumble dried using heat.

Cycle Description

Air Dry Use this cycle to dry all fabrics that can be tumble dried without using heat.

28 OPERATION
NOTE 1 kg, please use the Heated Dry. Wool items should be dried using the Wool cycle
and heat-sensitive fabrics including silk, underwear and lingerie should be dried using the Delicates cycle. For best results, and to avoid damaging clothes, follow the recommended load size when selecting a cycle.

Special Drying Cycles

Cycle Description

Downloaded
This cycle allows you to download a new and specialized drying cycle to your appliance with a smartphone.
LG ThinQ smartphone application to see the cycles available for download.

Selectable Drying Options

Cycle

Cycle

Dry Level

Off

Normal

Very

Normal

Damp

Heavy Duty

–

Bulky/Large

–

Small Load

–

Towels

–

Sportswear

–

Antibacterial

–

Delicates

Very

Normal

Damp

Wool

–

Perm. Press

Very

Normal

Damp

Rack Dry

–

Heated Dry

–

Dry Mode Energy Saver

# # #

#

Normal

# #

#

# # #

# #

Wrinkle Care

# # # # # # # # # # # # # # # #

OPERATION 29

ENGLISH

Cycle

Cycle

Dry Level

Air Dry

–

Dry Mode

Wrinkle Care

Off

Energy Saver

Normal

ying clothes by circulating the refrigerant at a lower speed than in the Normal mode. When this option is selected, the drying time will increase.

30 OPERATION

Options and Extra Functions
Your dryer includes several additional cycle options to customize cycles to meet your individual needs.
Select the desired option after selecting the desired cycle and settings.

NOTE option is selected.

will light up when the

available with every cycle.

light up if the selected option is not allowed for the selected cycle.

Dry Level
Use this option to select the dryness level for the cycle. Press the Dry Level button repeatedly to scroll through available settings.
NOTE available with the Normal,
Delicates, and Perm. Press cycles.
atically adjust the cycle time according to the selected dryness level. Selecting Very will increase the cycle time, while Damp will decrease the cycle time.
Damp setting for items that you wish to iron.

Wrinkle Care
Selecting this option will tumble the load periodically for up to 2 hours after the selected cycle, or until the door is opened. This is helpful in preventing wrinkles when you are unable to remove items from the dryer immediately.
Press the Wrinkle Care button before you start a drying cycle.

NOTE

t, a rectangle with a dashed line and ENd appears on the display until the feature is off.

Power button works after the drying cycle ends.

running, pause the cycle first to set the option.

the clothes.

iance before unloading

Signal On/Off
The appliance plays a melody when the drying cycle is finished. The buttons make a sound each time they are pressed. Use this button to turn the melody and button tones on or off.
Less Time and Custom PGM buttons for 3 seconds at the same time.
q lights up on the
display.

Dry Mode
Use this option to help reduce energy consumption when drying clothes.
Normal: Dry clothes with recommended settings.
Energy Saver: Dry clothes with recommended settings while circulating the refrigerant at a lower speed than Normal mode. When the option is selected, the drying time will increase.

Drum Light
The drum is equipped with a light that illuminates when the appliance is turned on. The light automatically turns off when the dryer door is closed and the cycle starts.
To turn on the light during a cycle, press and hold the Dry Mode button for 3 seconds. The drum light will turn on and then turn off automatically after 4 minutes.

More Time / Less Time
Use these buttons to increase or decrease drying time in 1 minute increments when you use manual drying cycles such as Rack Dry, Heated Dry and Air Dry.

Custom PGM
Save special combinations of settings that are used frequently as a custom program.

ENGLISH

Saving a Custom Program
1 Turn on the appliance and select the desired settings using the cycle selector knob and cycle modifier or option buttons.
2 Press and hold the Custom PGM button for 3 seconds.
NOTE
time. Pressing and holding the Custom PGM button will overwrite any previously saved custom program.

OPERATION 31
2 Seat the front of the rack securely on the inner door rim and the back of the rack on the rim at the back of the drum.

Recalling a Custom Program
1 Turn on the appliance and press the Custom PGM button.
2 Press the Start/Pause button to start the cycle.

3 Place wet items on the rack. Allow space around the items for air to circulate.

Rack Dry
Use this function with items, such as wool sweaters, silk items, and lingerie, that should be dried flat. The function can also be used with items that should not be tumbled dry, such as gym shoes or stuffed animals.

CAUTION rack installed.

of clothing with the

NOTE
as usual, but the rack will not move. Make sure all articles to be dried remain completely on the rack and cannot fall off or be pulled off by the turning drum. Be sure to remove the rack after use.
purchase a drying rack, contact an LG Electronics Customer Information Center or visit the website at http://www.lg.com.
1 With the door open, slide the rack into the drum and insert the hook on the drying rack into the hole at the center back of the drum.

4 Close the door and select Rack Dry.
5 Adjust drying time by pressing the More Time and Less Time buttons.
6 Press the Start/Pause button to start the cycle.
Control Lock
Use this function to disable the controls. This function can prevent children from changing cycles or operating the dryer.
NOTE
t, all buttons are locked except the Power button.
i lights up on the display and CL appears on the display during the
drying cycle.

32 OPERATION
NOTE
You must deactivate this function before you can access any other options and functions.
Locking/Unlocking the Control Panel
1 Turn on the power.
2 Press and hold the Wrinkle Care and Condenser Care buttons at the same time for 3 seconds to activate or deactivate this function.

SMART FUNCTIONS
LG ThinQ Application
The LG ThinQ application allows you to communicate with the appliance using a smartphone.
LG ThinQ Application Features
Dryer Cycle – Download new and specialized cycles that are
not included in the standard cycles on the appliance. Appliances that have been successfully connected to the LG ThinQ application can download a variety of specialty cycles specific to the appliance. Once cycle download is completed in the appliance, the appliance keeps the downloaded cycle until a new cycle is downloaded.
NOTE
a time.
Energy Monitoring
power consumption is affected by selected drying cycles and options. Remote Control – Control the appliance remotely or check to see how much time is left in the cycle from the LG ThinQ application.
NOTE
can start a cycle from the LG ThinQ application. If the cycle is not started, the appliance will wait to start the cycle until the appliance is turned off remotely or the remote control feature is disabled.
is disabled.
Push Messages – When the cycle is complete or the appliance
has problems, you will receive a push message. Smart Diagnosis – This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use.

SMART FUNCTIONS 33
Settings – Allows you to set various options on the
appliance and in the application. ailable on some models.
NOTE service provider, or password, delete the connected appliance from the LG ThinQ application and connect it again. rrent at the time of publication. The application is subject to change for product improvement purposes without notice to users.
Before Using LG ThinQ Application
1 Check the distance between the appliance and the wireless router (Wi-Fi network). the signal becomes weak. It may take a long time to register or installation may fail.
2 Turn off the Mobile data or Cellular Data on your smartphone.
3 Connect your smartphone to the wireless router.
NOTE nnection, check that the f
icon on the control panel is lit. only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual.

ENGLISH

34 SMART FUNCTIONS
NOTE LG ThinQ is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection.
make the wireless network service run slowly.
the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength.
depending on the Internet service provider.
may be interrupted because of the home network environment.
problems with the wireless signal transmission, unplug the appliance and wait about a minute before trying again.
disable the firewall or add an exception to it.
combination of English letters and numbers. (Do not use special characters.)
depending on the mobile operating system (OS) and the manufacturer.
of the router is set to WEP, network setup may fail. Change the security protocol (WPA2 is recommended), and connect the product again.
Installing the LG ThinQ Application
Search for the LG ThinQ application from the Google Play Store or Apple App Store on a smartphone. Follow instructions to download and install the application.

2 Press the Power button.
3 Press and hold the Remote Start button for 3 seconds to enable the remote control function.
4 Start a cycle from the LG ThinQ application on your smartphone.
NOTE
a cycle from the LG ThinQ smartphone application. If the cycle is not started, the application will wait to start the cycle until it is turned off remotely from the application or this function is disabled.
cycle remotely.

Disabling Remote Start Manually When the function is activated, press and hold the Remote Start button for 3 seconds.

Download Cycle
You can download new and specialized cycles that are not included in the standard cycles on the appliance.
Appliances that have been successfully connected to a Wi-Fi network can download a variety of specialty cycles specific to the appliance.
Once cycle download is completed in the appliance, the product keeps the downloaded cycle until a new cycle is downloaded.

NOTE appliance at a time.

e can be stored on the

Using the Appliance Remotely
Remote Start
Use a smartphone to control the appliance remotely. You can also monitor the cycle operation so you know how much time is left in the cycle.
Using Remote Start
1 Put the laundry into the drum and close the dryer door.

Wireless LAN Module Specifications

Frequency Range

2412 – 2462 MHz

Output Power < 30 dBm (Max)

FCC Notice
The following notice covers the transmitter module contained in this product.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
the receiving antenna.
and the receiver.
circuit different from that to which the receiver is connected.
technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.

SMART FUNCTIONS 35
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
Smart DiagnosisTM Function
This feature is only available on models with the c or d logo.
Use this feature to help you diagnose and solve problems with your appliance.
NOTE
the service may not operate due to external factors such as, but not limited to, Wi-Fi unavailability, Wi-Fi disconnection, local app store policy, or app unavailability.
ect to change without prior notice and may have a different form depending on where you are located.
Using LG ThinQ to Diagnose Issues
If you experience a problem with your Wi-Fi equipped appliance, it can transmit troubleshooting data to a smartphone using the LG ThinQ application.
LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions provided in the LG ThinQ application.
Using Audible Diagnosis to Diagnose Issues
Follow the instructions below to use the audible diagnosis method.
LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow

ENGLISH

36 SMART FUNCTIONS the instructions for audible diagnosis provided in the LG ThinQ application.
1 Press the Power button to turn on the appliance.
2 Hold the mouthpiece of your phone in front of
the c or d logo.
3 Press and hold the More Time button for 3 seconds or longer while continuing to hold your phone to the logo.
4 Keep the phone in place untill the tone transmission has finished. The display will count down the time. Once the countdown is over and the tones have stopped, the diagnosis will be displayed in the application. NOTE
the tones are being transmitted.

ENGLISH

MAINTENANCE
WARNING finish.

MAINTENANCE 37 ents to clean the appliance. They will damage the

Regular Cleaning
Cleaning the Lint Filter
CAUTION
cleaning of the lint filter. Failure to do so can cause lint buildup on the condenser that can affect the drying performance.
NOTE
and energy consumption and prevent unnecessary malfunctions.
before pulling out the lint filter.
into place. The appliance will not operate without the lint filter in place.

Cleaning the Inner Filter
1 Pull out the inner filter from the outer filter and then open the inner filter. direction of the arrow.
2 Use your fingers to get most of the lint off the filter. To clean off residual lint, use a vacuum cleaner or rinse under running water. using or it could cause an unpleasant odor. CAUTION magnet may dislodge and cause a malfunction.

a Inner Filter use.

ilter before and after

b Outer Filter
ter drying 10 times or when the lint has accumulated on the outer filter.

cycles and the K icon will blink.

3 After drying the inner filter completely, close the filter by pushing the center down. ght sides of the inner filter are closed properly.
4 Insert the inner filter into the outer filter.

38 MAINTENANCE
Cleaning the Outer Filter
1 Remove the dust or lint around the filter inlet.
CAUTION
degradation of drying performance and increase in drying time.

NOTE
you fail to do so, any lint accumulated on the filter may get into the appliance and may cause degradation of the drying performance.

2 Pull out the outer filter.

3 Remove the inner filter.

4 Open the outer filter by grasping the top edge and unfolding the sides.
5 Remove the residual lint with a vacuum cleaner or by washing under running water. before use. Failure to do so may cause an odor. CAUTION peatedly as the built in magnet may dislodge and cause a malfunction.
6 Push the two sides a of the filter together to close it.

7 Reassemble the filters and reinsert them.
CAUTION y clothes when the lint
filter is not in place. The clothes can drop into the filter inlet and it may cause the appliance to malfunction.
Emptying the Water Container
Condensed water is collected in the water container. Empty the water container after every use. Not doing so will affect the drying performance.
NOTE E icon lights up
and sounds while the appliance is running. drained out directly
through the optional drain hose, there is no need to empty the water container.

ENGLISH

1 Pull out the water container.
2 Empty the water container into the sink.
CAUTION Doing so could lead to health problems for people and animals.
avy when full. Hold the water container with two hands and be careful not to drop it.

MAINTENANCE 39
Cleaning the Interior
Wipe around the door opening and seal with a soft, damp cloth to prevent lint and dust buildup that could damage the door seal. Clean the window with a soft cloth dampened with warm water and a mild, nonabrasive household detergent. Then wipe dry. The stainless steel drum can be cleaned with a conventional stainless steel cleaner, used according to the manufact Never use steel wool or abrasive cleansers; they may scratch or damage the surface.
Periodic Cleaning
Wiping the Moisture Sensor
This device senses the moisture level of the clothes during operation. It must be cleaned regularly to remove any buildup of lime scale on the surface of the sensor. Wipe the sensors inside the drum.
CAUTION
materials. Use a dry acrylic sponge to clean the sensor.

3 Refit the water container into the appliance.
place.
4 Press the Start/Pause button to run a cycle.

Cleaning the Exterior
Proper care of your appliance can extend its life. The outside of the appliance can be cleaned with warm water and a mild, nonabrasive household detergent. Immediately wipe off any spills with a soft, damp cloth.

NOTE similar products.

irits, solvents, or

can damage the surface.

Cleaning the Cool Air Inlet Grille
Vacuum the cool air inlet grille 3 – 4 times a year to make sure there is no buildup of lint or dirt that can cause improper airflow. Always unplug the appliance before cleaning or vacuuming it.

40 MAINTENANCE

NOTE

grille.

through the ventilation

should have adequate ventilation to avoid pulling in the air from nearby fuel- burning appliances.

3 Reassemble the plug onto the drain tube and reclip the drain tube into its holder.
CAUTION
tube, water will leak out and could cause damage.

Draining the Remaining Condensed Water
After drying clothes, a small quantity of condensed water may sit in the base of the appliance and cause odors. Drain the remaining water regularly to reduce any unpleasant odors from the appliance.
NOTE e remaining water when
you are going to be away for a long time, because the remaining water will stagnate and cause odors.
before running Drum Care.
drain hose(s) and affect the drying performance in cold weather. Draining the remaining water can prevent damage to the appliance from unexpected freezing.
1 Run the Air Dry cycle for 3 minutes, and then turn off the appliance.
2 Unclip the drain tube under the appliance, remove the plug and drain the remaining water.

Using Drum Care Feature
Run the Drum Care cycle periodically to prevent unpleasant odors in the drum.
CAUTION
1 Remove the water container, empty it, and reassemble it.
2 Turn on the appliance. 3 Press the Drum Care button for 3 seconds.

4 Press the Start/Pause button.

NOTE
tank if the optional drain hose is installed or the appliance is stacked on a washing machine.

5 Empty the water container after the function has finished.
NOTE is installed, there is no
need to empty the water container.

ENGLISH

6 Open the dryer door and leave it open to allow air to circulate in the drum.
WARNING not allow children or
animals to climb into the appliance. Doing so could cause damage or injury.
Using Condenser Care Feature
The appliance automatically cleans built-up lint off of the condenser using water condensed from the drying process. If needed, the condenser can also be cleaned manually.
CAUTION
1 Pull out the water container and empty it.
2 Pour 34 oz. (1 liter) of clean water slowly into the opening of the water container compartment. Then slide the empty water container back into the compartment.
out. . (1.5 liters) of water
into the compartment will cause water to leak out.

MAINTENANCE 41

5 Press the Start/Pause button to start cleaning the condenser.

about 1 hour.

ning process takes

6 Empty the water container after the cleaning is finished.
NOTE is installed, there is no
need to empty the water container.

7 Open the dryer door and leave it open to allow air to circulate and thoroughly dry the drum.
WARNING not allow children or
animals to climb into the appliance. Doing so could cause damage or injury.

Care in Cold Climates
If the ambient temperature is too low, the condensed water inside the appliance could freeze and affect the appliance operation. If water freezes inside the appliance, follow these steps to thaw out the appliance before using it.
NOTE OE message or E icon appears on the display when the condensed water inside the appliance is frozen.

3 Turn on the appliance. 4 Press the Condenser Care button.

Thawing out the Accessories
CAUTION re to avoid burning
yourself with hot water.

Frozen Water in Drain Hose a towel soaked in hot
water (140 / 60 ).
Frozen Water in Water Container
filled with hot water (140 / 60 ).

References

• LG Open Source
• LG Electronics & Home Appliances | Shop Now | LG USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>