ORION 10PVMV Series Public View Monitor User Guide

: June 17, 2024
: Orion

Table of Contents

ORION 10PVMV Series Public View Monitor
SAFETY INSTRUCTION
FCC RF INTERFERENCE STATEMENT
INSTALLATION
SHORT KEY FUNCTION
CONNECTION
REMOTE CONTROLLER
OSD MENU SETTING
SETUP
PVM SETUP
PICTURE
SCREEN
SETUP
Menu Setting (HDMI Mode)
Camera Setting
FEATURE
TROUBLESHOOTING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ORION 10PVMV Series Public View Monitor

ORION-10PVMV-Series-Public-View-Monitor-PRODUCT

SAFETY INSTRUCTION

Follow this safety instruction to use the monitor properly and prevent the damage.

This safety instruction has “Warning” & “Caution” as below

Warning – If the user does not follow this instruction, it may cause serious damage to the user.
Caution – If the user does not follow this instruction, it may cause slight damage to the user or cause some damage to the monitor.

Keep this user’s guidebook for later use.

Warning

WARNING: How to fix

Do not open this product as it contains high voltage inside.
It may create an electric shock.
If the user disassembles and removes the back cover, it does not make sure to make up for the damages and do a service and exchange the monitor.

Cautions

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR WATER.

Instructions for Disposal of Electrical and Electronic Equipment in Private Households

Disposal of used Electrical and Electronic Equipment (Applicable in the European Union and other European countries with garbage separate disposal and collection methods)

This on the product, or in the related documents in the package, indicates that this product shall not be treated as normal household waste. Instead, it should be taken to a proper applicable collection point or depot for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent possible negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of the product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city authority, your household waste disposal service or the place where you purchased the product.

FCC RF INTERFERENCE STATEMENT

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio, or TV technician for help.
Only a shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to operate such equipment.

DOC COMPLIANCE NOTICE

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the radio interference regulation of Canadian Department of Communications.

INSTALLATION

Parts

How to Install

KEY BUTTON

SHORT KEY FUNCTION

CONNECTION

ORION-10PVMV-Series-Public-View-Monitor-
FIG-8

AC POWER
- AC100~240V input
HDMI
- HDMI signal input
VGA
- VGA (PC RGB) signal input
CAMERA OUT 8
- CAMERA signal looping out
VIDEO IN / OUT
- VIDEO signal input / looping out
AUDIO (VIDEO)
- Stereo audio input for VIDEO or S-VIDEO
AUDIO (PC)
- Stereo audio input for VGA
DC POWER
- DC power input
MICRO SD CARD (Option)
- Micro SD Memory card slot

REMOTE CONTROLLER

A: MODE SELECT MENU

CAMERA
- Select CAMERA mode
VGA (RGB)
- Select VGA mode
VIDEO
- Select VIDEO mode
HDMI
- Select HDMI mode

B: OSD CONTROL MENU

POWER
- Turn ON / OFF the monitor
AUTO
- Auto-adjust position of the screen (in VGA mode)
SCAN MODE
- Select the scan mode of the screen
MENU / EXIT
- Activate and exit the OSD menu
MUTE
- Turn ON / OFF the sound
COLOR TEMPERATURE
- Select color temperature of the screen
VOL- / VOL+
- Increase / Decrease the volume level
KEY LOCK
- Locking the button (Prevent operation)

C : PIP CONTROL MENU

S. SET
- Select between the main and PIP audio input
P. INPUT
- Select an input source for PIP mode
P. SIZE
- Select a size for PIP mode
PIP
- Activates PIP/PBP mode
P. LOCATION
- Select a location for PIP mode

Mode Setting

Use the SOURCE button and then / button to move the source.
Press the button to select the source.
Press the MENU/EXIT button to exit the INPUT menu.

Inputs can be set to CAMERA, VIDEO, RGB PC & HDMI mode

CAMERA
- Select CAMERA mode
VIDEO
- Select VIDEO mode
RGB PC
- Select VGA mode
HDM
- Select HDMI mode

Menu Setting (CAMERA, VIDEO Mode)

PICTURE

CONTRAST: Adjust visual colour contrast
COLOR: Adjust the visual colour of screen
SHARPNESS: Adjust the sharpness of the screen
SCAN MODE: Select the scan mode of the screen

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

BRIGHTNESS: Adjust color brightness
TINT: Adjust the tint of colour
COLOR TEMP: Switch the colour temperature of the screen

CONTRAST

Default setting is 60% and adjustable from range of 0 to 100%

BRIGHTNESS

The default setting is 50% and adjustable from range of 0 to 100%

COLOR

Default setting is 50% and adjustable from range of 0 to 100%

TINT

The default setting is 50% and adjustable from a range of 0 to 100%

SHARPNESS

Default setting is 50% and adjustable from range of 0 to 100%

COLOR TEMP

The default setting is MEDIUM and switches to WARM, USER and COOL color temperature options
USER – Default setting of RED, GREEN, and BLUE is 50% and adjustable from a range of 0 to 100%

SCAN MODE

The default setting is FULL, switch to UNDER and OVER scan mode options

SETUP

ORION-10PVMV-Series-Public-View-Monitor-
FIG-19

INPUT : Select an input source for the main screen SOUND
MUTE: Turn on/off the sound
NOISE REDUCTION : Set a noise reduction mode
DEFAULT: Factory default setting

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

LANGUAGE: Set to a different language mode
BUTTON LOCK: Locking the button (Prevent operation)
OSD TIME: Set a time duration of the OSD menu

INPUT

Inputs can be set to CAMERA, VIDEO, RGB PC, and HDMI mode

LANGUAGE

The default setting is ENGLISH and the language setting can be set to ITALIAN, FRENCH, SPANISH and GERMAN

SOUND MUTE

The default setting is OFF and the switch to the ON sound mute option

BUTTON LOCK

The default setting is OFF and switches to ON button lock option Release the lock

Press the KEY LOCK button on the remote control
Press button on the keypad

NOISE REDUCTION

The default setting is ON and the switch to OFF noise reduction option

OSD TIME

Default setting is 15s and adjustable from range of 5 to 30s

DEFAULT

DEFAULT is set OSD menu to factory default

CYCLE SETUP

CYCLE TIME: Adjust cycle time to be displayed on the screen

Press the MENU/EXIT key to access the menu.
Use the arrow to highlight a selection.
Press the /SELECT to choose an item.
Use the arrow to highlight a selection.
Use the arrow to adjust the setting on a selected item.

CYCLE: Selected mode keeps changing continuously

CYCLE TIME

The default setting is 10s and adjustable from a range of 10 to 30s

CYCLE

The default setting is OFF and switch to the ON cycle option

PVM SETUP

ORION-10PVMV-Series-Public-View-Monitor-
FIG-30

MOTION MODE: Set the PIR sensor mode
MOTION INPUT: Select the input source of the PIR sensor mode

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

MOTION MODE

The default setting is OFF and switch to FULL mode options

MOTION INPUT

Inputs can be set to CAMERA, VIDEO, RGB PC and HDMI mode

PICTURE

ORION-10PVMV-Series-Public-View-Monitor-
FIG-33

CONTRAST: Adjust visual colour contrast
COLOR TEMP: Switch the colour temperature of the screen

Press the MENU/EXIT key to access the menu.
Use the arrow to highlight a selection.
Press the SELECT to choose an item.
Use the arrow to highlight a selection.
Use the arrow to adjust the setting on a selected item.

BRIGHTNESS: Adjust color brightness

CONTRAST

The default setting is 60% and adjustable from a range of 0 to 100%

BRIGHTNESS

The default setting is 50% and adjustable from a range of 0 to 100%

COLOR TEMP

The default setting is MEDIUM and switches to WARM, USER and COOL color temperature options
USER – Default setting of RED, GREEN, and BLUE is 50% and adjustable from range of 0 to 100%

SCREEN

ORION-10PVMV-Series-Public-View-Monitor-FIG-37

PIP: Activates PIP/PBP mode

Press the MENU/EXIT key to access the menu.
Use the arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

PIP

The default setting is OFF and switches to ON, DW1 and DW2 PIP/PBP mode options

ON- PIP INPUT: Select an input source for PIP mode (CAMERA, VIDEO)
PIP SIZE: Select a size for PIP mode (SMALL, NORMAL, LARGE)
PIP R/T: Select a location for PIP mode (R/B, L/B, R/T, L/T)

SETUP

ORION-10PVMV-Series-Public-View-Monitor-
FIG-39

This function of each menu is listed Please refer to page 16 for the SETUP menu

Press the MENU/EXIT key to access the menu.
Use the arrow to highlight a selection.
Press the SELECT to choose an item.
Use the arrow to highlight a selection.
Use the arrow to adjust the setting on a selected item.

RGB SETUP

H-POSITION: Adjust the horizontal position of the monitor
CLOCK: Adjust clock of the monitor
AUTO ADJUST: Auto adjust the position of the screen
AUTO REPEAT: Adjust auto-repeat of the monitor

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

V-POSITION: Adjust the vertical position of the monitor
PHASE: Adjust the phase of the monitor
POWER SAVING: Power saving mode

H-POSITION

Can be set between 0 to 100% of the horizontal position of the monitor by manually

V-POSITION

Can be set between 0 to 100% vertical position of the monitor by manually

CLOCK

Can be set between 0 to 100% clock of monitor by manually

AUTO ADJUST

Auto-adjust position and image of the screen

AUTO REPEAT

Default setting is OFF and switch to ON auto repeat mode

PHASE

Can be set between 0 to 100% phase of the monitor by manually

POWER SAVING

Default setting is OFF and switch to ON power saving mode

CYCLE SETUP

This function of each menu is listed please refer to page 19 for the CYCLE SETUP menu

Press the MENU/EXIT key to access the menu.
Use the arrow to highlight a selection.
Press the SELECT to choose an item.
Use the arrow to highlight a selection.
Use the arrow to adjust the setting on a selected item.

PVM SETUP

MOTION MODE: Set the PIR sensor mode
MOTION INPUT: Select the input source of the PIR sensor mode

Press the MENU/EXIT key to access the menu.
Use the arrow to highlight a selection.
Press the /SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

MOTION MODE

The default setting is OFF and switches to FULL, PIP, DW1 and DW2 mode options

MOTION INPUT

Inputs can be set to CAMERA, VIDEO, RGB PC and HDMI mode

VGA / DVI / HDMI Mode Tables

Note: Not all resolutions generated by your video source are available on the Monito

PICTURE

CONTRAST: Adjust visual colour contrast
COLOR: Adjust the visual colour of the screen
SHARPNESS: Adjust the sharpness of the screen

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
Press the /SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

BRIGHTNESS: Adjust color brightness
TINT: Adjust the tint of the colour
COLOR TEMP: Switch the colour temperature of the screen

CONTRAST

BRIGHTNESS

The default setting is 50% and adjustable from range of 0 to 100%

COLOR

Default setting is 50% and adjustable from range of 0 to 100%

TINT

The default setting is 50% and adjustable from a range of 0 to 100%

SHARPNESS

Default setting is 50% and adjustable from a range of 0 to 100%

COLOR TEMP

The default setting is MEDIUM and switches to WARM, USER and COOL colour temperature options USER – Default setting of RED, GREEN, and BLUE is 50% and adjustable from a range of 0 to 100%

SCREEN

This function of each menu is listed Please refer to page 22 for the SCREEN menu

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

SETUP

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

CYCLE SETUP

This function of each menu is listed page 19 Please refer to page 19 for CYCLE SETUP menu

Press the MENU/EXIT key to access the menu.
Use the & arrow to highlight a selection.
3. Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

PVM SETUP

This function of each menu is listed page 26 Please refer to page 26 for PVM SETUP menu

Press the MENU/EXIT key to access menu.
Use the & arrow to highlight a selection.
Press the SELECT to choose an item.
Use the & arrow to highlight a selection.
Use the & arrow to adjust the setting on a selected item.

Camera Setting

EXPOSURE	ELC/ALC
DAY / NIGHT	DAY / NIGHT / EXTERN / CDS / AUTO
WHITE BAL.	ATW / PUSH / MANUAL

MONITOR

IMAGE

SYSTEM

FEATURE

	10 inches	19 inches	20 inches	23 inches	27 inches	32 inches

Display

| Screen Size| 9.7 inches| 19.0 inches| 20.1 inches| 23.0 inches| 27.0 inches| 31.6 inches
Resolution| 1024768 pixels| 12801024 pixels| 16001200 pixels| 19201080 pixels
Pixel Pitch| 0.1920.192 mm| 0.2940.294 mm| 0.2550.255 mm| 0.2650.265 mm| 0.3110.311 mm| 0.3640.364 mm
Brightness| 350 cd/m^2| 250 cd/m^2| 300 cd/m^2| 250 cd/m^2| 250 cd/m^2| 360 cd/m^2
Contrast Ratio| 600:1| 1000:1| 800:1| 1000:1| 1400:1
Aspect Ratio| 4:3| 5:4| 4:3| 16:9
Viewing Angle (H/V)| 160/160 degrees| 170/160 degrees| 178/178 degrees| 170/160 degrees| 178/178 degrees
Display Color| 262,144| 16.7 million
Response Time| 35 ms| 5 ms| 6 ms| 5 ms| 8 ms
Video System| NTSC/PAL
Panel Life Time (hours)| 10,000 hours| 30,000 hours| 45,000 hours| 30,000 hours| 50,000 hours

Interface

Features Special

Camera

Mounts

| VESA Mounts Size| 7575 mm| 100100 mm| 200*200 mm
Ceiling Mount| SIDE MOUNT(1/4-20), CMK-01| CMK-01| CMK-01 with FMA-01
Wall| WB-5, 10, 30, 31| WB-2642

TROUBLESHOOTING

When the following troubles have occurred, follow the troubleshooting. Before contacting a service centre.

Troubleshooting	Troubleshooting Tip

The screen doesn’t show up

| 1. Make sure if the power supply is connected properly
2. Turn on the power.
3. Select the input signal right for the connected port.
The screen is too light or to dark|

Control the BRIGHTNESS

The screen size is not fit for the PC signal| Press the AUTO key among keys in the front. (It is used only in the PC signal)
The screen color shows strange in the PC signal| In the FUNCTION menu of OSD menu, perform the AUTOADJUST.