WARING WT90B Warming Tray Instruction Manual
- June 17, 2024
- WARING
Table of Contents
WARING WT90B Warming Tray
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed, including the following:
- READ ALL INSTRUCTIONS.
- To protect against risk of electrical shock, do not put appliance in water or other liquid.
- Do not touch surfaces that may be hot. Always use hot pads or potholders until unit cools.
- Use handles and knobs provided.
- Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
- Avoid contact with moving parts.
- Do not operate the Waring ProTM Warming Tray or any other electrical equipment with a damaged cord or plug, or after the unit malfunctions, or is dropped or damaged in any manner. Return it to the nearest authorized service facility for examination, repair, or adjustment.
- The use of attachments not recommended or sold by Waring may cause fire, electric shock, or injury.
- Do not use outdoors.
- Always check that the control is off before plugging cord into wall outlet. To disconnect, turn the control knob to Off, then remove plug from wall.
- Do not place near hot gas/electric burner or heated oven.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- It is recommended that this appliance not be moved when it contains hot oil or other hot liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Do not use appliance for other than intended use.
- DO NOT USE PLASTIC DISHES OR PLASTIC WRAP ON TRAY.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY TIPS
SHORT CORD INSTRUCTIONS
A short power-supply cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a longer cord.
If a longer detachable power-supply cord or extension cord is used, (1) the
marked electrical rating of the extension cord should be at least as great as
the electrical rating of the appliance, and (2) the longer cord should be
arranged so that it will not drape over the countertop or tabletop where it
can be pulled on by children or tripped over unintentionally.
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of fire or electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instruction in the literature accompanying the appliance.
PARTS
Before first use, clean the warming tray base with a mild detergent and a soft
moist cloth. DO NOT SUBMERGE THE WARMING BASE OR LET THE PLUG COME IN CONTACT
WITH WATER. DO NOT ALLOW WATER TO SPILL OR SEEP INTO THE FRAME. Rinse and wipe
dry.
Heat the warming base for approximately 10 minutes at a maximum setting.
NOTE : Temporary smoking might occur. This is normal during initial use.
- Warming tray
- Power On indicator light
- Adjustable thermostat
- Thermo-insulated handles
OPERATION
NOTE: For best results, set warming tray to maximum heat setting to warm up quickly. Then adjust thermostat to desired temperature. Serving temperature is from 155˚F (min.) – 200˚F (max.
- Plug unit in. The red power On light will come on. Set thermostat to desired temperature setting.
- NOTE : Food placed on warming tray should be FULLY cooked and already hot. The Waring Pro™ Warming Tray is designed to keep food warm only. This product is not a cooking appliance.
- Foods containing little or no liquid should be kept on a lower setting and stirred periodically.
- Be sure to use containers that are heatproof.
Note: Tray is not designed to keep large, deep pots full of food or liquid warm.
CARE AND CLEANING
Do not use any scouring agents or abrasive pads. The best way to clean the Waring Pro™ Warming Tray is with a mild detergent and a soft moist cloth.
DO NOT SUBMERGE THE WARING PROTM WARMING TRAY BASE OR LET THE HEAT CONTROL COME IN CONTACT WITH WATER.
To polish use a nonabrasive glass cleaner. Any food residue remaining can be wiped away with a soft sponge. Rinse and wipe dry.
DO NOT ALLOW WATER TO SPILL OR SEEP INTO FRAME.
CUSTOMER SUPPORT
©2008 Waring Products
Division of Conair Corporation
150 Milford Road
East Windsor, NJ 08520
www.waringpro.com
Printed in China
08WR111
IB-8434A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>