ROOMBANKER RBAD-RL1915 Relay User Manual
- June 17, 2024
- Roombanker
Table of Contents
User Manual
RBAD-RL1915
Relay
Download Spec
RBF Relay is a dry contact relay to control 6-36 V⎓ power supply remotely.
Features
ON/OFF
- Physical button control
- App Control
- Smart Scene control: By Alarm, By Operation, By Fault, By Schedule
Remote setting and testing
- Setting and testing from RB Link App
Advanced features
- Power up enrolling When sensor is powered up, it will automatically start paring to the hub nearby
- Find me When enabled, the device starts flashing green, which can help identify the sensor from numerous door magnetic sensors.
- Signal strength detection When enabled, relay starts flashing green/orange/red showing the wireless signal strength between the hub at current installation place.
Indicator
ON: Blue on
OFF: Blue off
Find me: Flashing Green
Signal strength: Flashing Green / Orange / Red Flashing Green: signal strength
is strong, and is recommended to install device hereFlashing Orange: signal
strength is medium and device can be installed hereFlashing Red: signal
strength is bad or no signal, and device can not be installed here
RBF wireless technology
Wireless signal range
- 868 MHz Relay: Up to 1,900 m in an open space with hub
- Two-way communication between hub
Frequency bands
- 868 MHz Relay: 863 ~ 870 MHz
- 915 MHz Relay: 902 ~ 928 MHz
Depends on sales region.
Maximum effective radiated power
- Up to 20 dBm Featured automatic power control to reduce power consumption and noise interference.
Wireless signal modulation
- FSK / DSSS
Encrypted communication
- All the data transmitted are protected by AES-CCM encryption with a random key.
Frequency hopping (FHSS)
- To prevent radio interference and radio signal interception.
Time division multiple access (TDMA)
- With the help of clock synchronization technology, hub will slice time into different division for different RBF wireless devices. In this way, all devices will communicate with hub in a sequence.
Electrical Characteristics
Power Supply
- 7 – 24 V⎓ (DC only)
Maximum load current
- 5 A at 24 V⎓
General
Operation Temperature
- From -10°С to +55°С (14°F to 131°F)
Operation Humidity
- From 10% to 90%
Storage Temperature
- From -20°C to 60°C (-4°F to 140°F)
Dimension(W × H × D)
- 40mm × 35mm × 20mm
Weight
- xxv. 7 g
Compatibility
- Operates with all RoomBanker Home Security Hubs, RBF repeaters.
Complete set
- Relay Module
- Quick Start Guide
| Product | Quantity |
|---|---|
| Relay Module | × 1 |
| Quick Start Guide | × 1 |
Additional information
Available models
- RBAD-RL1-868
- RBAD-RL1-915
Certifications
- CE, CB
- FCC
- ICASA
- RCM
- NOM
- Anatel
Warranty
- Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
FCC Statement
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the device, including the
antenna.