SEURA ENT4 Entertainment TV Mirror User Manual
- June 4, 2024
- SEURA
Table of Contents
- SEURA ENT4 Entertainment TV Mirror
- Accessories
- FCC Supplier’s Declaration of Conform ity Entertainment
- Important Safety Instructions
- Get to know your Séura® Entertainment TV Mirror
- Parts
- Installing Your Entertainment TV Mirror
- Connecting Your Entertainment TV Mirror
- VESA Wall Mounting
- Remote Functions
- Troubleshooting
- Caring for your Séura® Entertainment TV Mirror
- Specifications
- Control Documentation
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SEURA ENT4 Entertainment TV Mirror
WARNING: READ ALL INSTRUCTIONS BEFORE ATTEMPTING TO INSTALL OR SERVICE THIS PRODUCT.
- This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
- This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.
CAUTION
- RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN BACK PANEL, NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Warnings:
- Do not handle or remove your display from the packaging until it is ready to be installed.
- To avoid damage to the display, only transport it in a vertical position.
- It is highly recommended that at least two (2) persons assist in the installation of the display.
Do not let metal pieces or objects of any kind fall i nto the display. High voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts.
To prevent fire, never place any type of candle or flames on the top or
near the display.
To prevent fire or shock hazard, do not place the AC cord under the display or
other heavy items.
Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Accessories
Do not use accessories not specifically recommended by the manufacturer. Use of improper attachments can result in accidents.
WARNINGS
Never place a television set in an unstable location. A television set may
fall, causing serious personal injury or death. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Ensuring the television set is not overhanging the edge of the supporting furniture.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be applied.
WARNING: Cancer and Reproductive Harm:
www.p65warnings.ca.gov.
Specifications of this product are subject to unannounced changes; this manual
may thus not reflect the current technical status.
FCC Supplier’s Declaration of Conform ity Entertainment
ENT4-65, ENT4-75
This device complies with part 15 of the FCC Rules. Operation is subject to
the follow two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
PAN International
Address: 48008 Fremont Blvd, Fremont, CA 94538 United States
Phone number: 510-623-3810
Caution : The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is` encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.
WARNINGS
To reduce the risk of fire, electrical shock and other injuries, keep these
safety precautions in mind when installing, using, and maintaining your TV.
The socket-outlet should be installed near the equipment and be easily
accessible. The display should be connected to a grounded GFCI protected main
socket outlet.
WARNING : If you manipulate against the recommended usage, serious injury
or death to user may result.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Clean only with a dry cloth.
- Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves,or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use the attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To reduce the risk of fire or electric shock, do not expose the inside of this apparatus to rain or moisture. The inside of this apparatus shall not be exposed to dripping or splashing.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- The disconnect device shall remain readily operable.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- I nspect the desired location for installation and be aware of all electrical wiring pathways, water pipes, gas lines, or other potentially hazardous conditions that may exist to protect from accidental damage during creation of on-site conditions.
- Ensure all required electrical specifications are adhered to and have been installed by the appropriate individuals and are code approved.
- Ensure all framing requirements, if needed, have been completed to building code and pose no structural issues.
- It is REQUIRED that this product is plugged into an electrical outlet protected by a Ground Fault Circuit Interrupter (GFCI) to protect against electric shock, fire, and/or injury. Failure to do so will void any warranty for this product.
- Only qualified individuals should attempt to service the product. Removing covers can expose you to high voltage and other dangerous conditions.
- Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.
- Close adult supervision is necessary when any product is used by or near children.
- Do not operate any product with a damaged cord or plug or operate it after the appliance malfunctions or has been damaged in any manner.
- To electrically disconnect the product, turn OFF the product, then remove the electrical power plug from the outlet.
- This Séura product is intended for use indoors.
- If you notice any smoke or scorched smell near the product, unplug power cord and refer to qualified personnel for service and/or repair.
- Do not use or place any combustible or flammable substances near the product.
- Do not use this product for other than intended use.
- Do not immerse this product in water.
Operation and Storage Requirements
Mount the device in such a way that it is protected against moisture. To
prevent fire or electric shock, never allow liquids to enter the unit. The
uninstalled product must be stored in dry and well-ventilated rooms, without
extreme temperature fluctuations. Heat sources and aggressive active
substances may not be stored in the proximity of the device. The required
storage temperature is -24°F to 140°F. The device must be stored in the
complete packaging, as delivered. The product must not operate on average more
than twelve (12) hours per day on a permanent or extended periodic basis. The
product must have proper, correct and sufficient AC supply voltage.
Screen Health
The 4K liquid crystal panel is a high technology product with 8,294,400
pixels, giving you fine picture details. Occasionally, a few non-active pixels
may appear on the screen as a fixed point of blue, green or red. Please note
that this does not affect the performance of your product. Pixel errors
outside of Séura’s specified
and permitted area are covered under Séura’s limited product warranty. Please
inquire directly with Séura Technical Support regarding Séura’s Pixel Policy.
Installation Environment
Avoid direct light or sun exposure, direct proximity to heat sources. Do not
place any heat sources such as radiators and heat registers, etc. near the
monitor. To reduce eye strain, avoid installing the Séura Television Mirror
against a bright background such as a window. Position the monitor at the
height of your eye level. Position the monitor directly in front of you at a
comfortable viewing distance.
Séura’s Television Mirrors can weigh up to 240 lbs (fluctuates based on custom
mirror size and frame type). Verify that the wall or mounting surface can
support the necessary hardware and weight of the television mirror.
Clearance of 1-1/4” is required on the top, sides, and bottom of the product.
IMPORTANT
The display should not be installed directly over a flat surface if heavy or
driving rain may puddle and splash up onto the lower portion of the display.
Direct sunlight on the display screen will heat internal components and should
be avoided.
Get to know your Séura® Entertainment TV Mirror
If you have questions, call Séura at
1-800-957-3872 to speak to a design
expert.
The environment in which the mirror display is installed will affect the
product performance. The key factors to consider for proper installation are
surroundings and ambient light. Use the following guidelines to maximize the
performance of the Séura product:
Type of Lighting
Avoid direct natural sunlight and excessive fluorescent lighting. These
conditions will diminish the television brightness and hinder its performance.
- DO use ambient or indirect lighting that illuminates the room, not the Mirror Display.
- DO NOT position lighting directly on the Mirror Display.
- This will wash out the picture and hinder the product’s performance.
Light Direction
Avoid directing light toward the mirror. Position lights such that they
illuminate objects in the room, not the mirror itself. For example, lights on
the wall next to the mirror are more favorable than lighting located on the
ceiling in the center of the room.
Background Colors
Sidewalls and furnishings that are dark, uniform, and non-reflective will
provide better performance of the display. Bright colors, patterns, and
contrasting colors will minimize the quality of the display.
- DO use shades or window treatments to block outdoor light that would interfere with picture performance.
- DO NOT position the product opposite bright, untreated windows.
- Natural lighting will interfere with picture performance.
Meet Séura® Entertainment TV Mirror
Parts
Installing Your Entertainment TV Mirror
Séura® Entertainment TV Mirror is designed to be wall-mounted using the included mounting brackets for either surface or recessed mounting. Alternatively, the VESA mounting locations can be used with a compatible wall mount (not included). Verify weight capacity compatibility with any third party mounts.
Refer to the included custom drawing package for specific dimensions and instructions for your custom product.
-
Verify that the wall is prepared appropriately. If the product is an in-wall, or “Recessed” configuration, verify the dimensions of the rough opening.
-
I nstall mounting brackets according to the dimensions and instructions shown on “Sheet 3” of the included drawing package. Ensure mounting brackets are securely fastened using wood framing members where possible.
NOTE: Take care when moving the product. Always transport the product with at least two people.
WARNING: Always transport the product in a vertical position. Moving the product in an unsupported horizontal position may result in product flex or damage. -
Connect power supplies and audio/video components Test all electrical and electronic devices to verify proper integration and functionality before securely mounting it to the wall is strongly recommended.
-
Position TV Mirror close to wall surface and securely engage mounting brackets. Allow for a ¼” ventilation gap for proper air flow and heat transfer.
-
Check to ensure the TV Mirror is fully engaged and secure to the mounting brackets.
-
Reference the appropriate electronics manual for TV Mirror operating instructions.
Connecting Your Entertainment TV Mirror
To connect a source such as a streaming device or cable box, connect one end of an HDMI cable (or other, cables not included) into an HDMI port on the display and the other end into your device.
VESA Wall Mounting
Install your wall mount on a solid wall perpendicular to the floor. When
attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe
personal injury.
We recommend that you use included or compatable Séura mounting hardware.
VESA PATTERN
(A x B)
|
300 x 300mm
|
400 x 200mm
|
400 x 200mm
---|---|---|---
STANDARD SCREW
|
M6
|
M6
|
M8
NOTE
Screw length needed depends on the wall mount used. For further information,
refer to the instructions included with the mount.
Standard dimensions for wall mounting are shown in the above table.
When purchasing a Séura wall mount, a detailed installation manual and all
parts necessary for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause damage
to the inside to the display.
For wall mounts that do not comply with the VESA standard screw
specifications, the length of the screws may differ depending on their
specifications.
Do not use screws that do not comply with the VESA standard screw
specifications.
Do not fasten the screws too strongly, this may damage the display or cause
the display to fall, leading to personal injury. Séura is not liable for these
kinds of accidents.
Séura is not liable for display damage or personal injury when a non-VESA or
non specified wall mount is used or the consumer fails to follow the display
installation instructions.
CAUTION: Do not install your wall mount kit while your display is turned
on. It may result in personal injury due to electric shock.
CAUTION : Do not allow children to climb on or hang from the display.
Remote Functions
Troubleshooting
If the product is not working properly, please check the following troubleshooting solutions before you contact customer service:
Challenge | Possible Solution |
---|
Will Not Power Up
| • Make sure to check that the AC power cable is connected to an outlet and the display
• Make sure that the power outlet is receiving power
• Try pressing POWER button on the display to make sure the problem is not the remote.
If the display turns on, refer to ‘Remote control does not work’ troubleshooting guide.
Remote Control
Not Working
| • Make sure that there is known working batteries in the remote and in the correct polarity
• Make sure there are no obstacles in between the IR receiver and the remote (ex. sunlight or tape)
• Try pointing the remote directly at the display from 5 feet away.
Signal Issue
| • Check cable connections to ensure they are connected.
• Plug the video source directly into the display which will remove any potential issues associated with an extender or matrix switch device. (if applicable)
• Replace cables with known working cables.
• Make sure the connected devices are powered ON.
• Make sure that the source is on the correct INPUT.
• Power cycle the video source device by unplugging the device and plugging the device back in.
No Sound
| • Make sure your cables are connected properly
• Make sure the display is not on MUTE / turn up the volume.
• Make sure the Digital Audio Settings within the display is not set to OFF
• Test the external sound system with another device to ensure that it is working.
For additional technical support, please contact Séura at 1-800-957-3872 during regular business hours: M-F 8:00 am – 4:30 pm, Central Time.
Caring for your Séura® Entertainment TV Mirror
Please follow the guidelines listed for proper Television Mirror care and cleaning:
- The glass surface can be cleaned with any conventional non-ammoniated glass cleaner. Care should be taken to use only a soft lint-free cloth. Apply all cleaners directly to the cloth and not the glass surface. Never saturate the glass surface as residual cleaner may seep behind the glass.
- Stubborn spots can be removed with solvents such as mineral spirits, denatured alcohol, and acetone. Immediately remove solvent and dirt residues per the prescribed methods above with a compatible glass cleaner or water.
Specifications
VIDEO | DISPLAY RESOLUTION | 3840 x 2160 |
---|---|---|
DISPLAY BRIGHTNESS | 700 Nits | |
ASPECT RATIO | 16:9 | |
CONTRAST RATIO | Typical 5000:1 | |
DOLBY DIGITAL SUPPORT | Dolby Digital 5.1 | |
HDR COMPATIBLE | HDR 10 Compatible | |
RESPONSE TIME | 8 ms | |
VIEWING ANGLE | 178° Horizontal/Vertical | |
DISPLAY POWER CONS. | 138 watts / 1.26a @ 120v | 280 watts / 2.55a @ 120v |
watts /3.28a @ 120v
INSTALLATION| STANDARD MIRROR SIZE
(NO FRAME)
| 43.5” w x 27.25” h| 62.75” w x 38” h| 71.5” w x 43” h
STANDARD TV MIRROR WEIGHT|
66 lbs.
|
116 lbs.
|
140 lbs.
MEDIA COMPARTMENT DIMENSIONS|
3.75” w x 4” h x 1.125” d
|
3.75″ w x 4″ h x 1.125″ d
|
3.75″ w x 4″ h x 1.125″ d
VESA PATTERN| 300 x 300mm| 400 x 200mm| 400 x 200mm
Control Documentation
To access current control documents, please visit www.seura.com/download-
center
LIMITED PRODUCT WARRANTY
For information regarding Séura’s warranty policy, please visit our website:
www.seura.com/warranty. If the current Séura
warranty policy is after your product purchase date, please contact Séura
Customer Support to request warranty documentation from the date of your
purchase.
For additional customer support, please contact Séura.
Toll Free: 1-800-957-3872 (Monday –
Friday 8:00 am – 4:30 pm, Central Time)
Website: www.seura.com/support 230 Ontario
Road Green Bay, Wisconsin 54311
1-800-957-3872
contacts@seura.com
www.seura.com
References
- Consumer Product Registration - Séura
- p65warnings.ca.gov
- Séura | Technology + Design
- Support - Séura
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>