SERVER 101319 Fountain Pump Instruction Manual
- June 17, 2024
- SERVER
Table of Contents
SERVER 101319 Fountain Pump
Product Information
Specifications
- Brand: Server Products Inc.
- Model: Fountain Pump FP-200 w/ Offset Discharge Tube
- Part Number: 101319
- Color: Brown (Knob), Black (Knob)
- Components:
- Knob (x2): 82023-700 (Brown), 82023-000 (Black)
- Locking Collar: 83412
- Head Tube: 82017
- Head Insert: 82018
- Spring: 82016
- Washer: 82015
- Piston & Seal Assembly: 100075
- Discharge Tube: 100603
- Discharge Tube Nut: 82027
- O-Ring: 1 (05127)
- Valve Body: 82433
- Suction Tube: 82341
- Lid: 101315
- Cylinder: 82362
- O-Ring: 1 5/16 (82323)
- O-Ring: 11/16 (82339)
- Food Equipment Lubricant: 40179
- 11 Brush: 82049
- 21 Brush: 82526
Product Usage Instructions
Step 1: Installation
- Ensure that the Fountain Pump FP-200 is placed on a stable and level surface.
- Attach the Suction Tube (82341) to the Valve Body (82433) by screwing it in clockwise until snug.
- Insert the Cylinder (82362) into the Valve Body (82433) and secure it tightly.
- Place the Lid (101315) onto the Cylinder (82362) and press down
- firmly to ensure a tight seal.
- Attach the Discharge Tube (100603) to the Valve Body (82433) by screwing it in clockwise until snug.
- Connect the Discharge Tube Nut (82027) to the end of the Discharge Tube (100603) and tighten it securely.
Step 2: Operation
- Ensure that the Fountain Pump FP-200 is connected to a power source.
- Turn the Knobs (82023-700 or 82023-000) counterclockwise to unlock the Locking Collar (83412).
- Adjust the position of the Head Tube (82017) by sliding it up or down as needed.
- Insert the desired Head Insert (82018) into the Head Tube (82017).
- Turn the Knobs (82023-700 or 82023-000) clockwise to lock the Head Tube (82017) and secure the Head Insert (82018) in place.
- Prime the pump by pouring a small amount of liquid into the Cylinder (82362) and turning the Knobs (82023-700 or 82023-000) counterclockwise to activate the pump.
- Adjust the flow rate by turning the Knobs (82023-700 or 82023-000) clockwise or counterclockwise.
FAQ
-
Q: How do I clean the Fountain Pump FP-200?
A: To clean the Fountain Pump FP-200, disassemble the components and wash them with warm soapy water. Rinse thoroughly and dry before reassembling. -
Q: Can I use the Fountain Pump FP-200 with hot liquids?
A: No, the Fountain Pump FP-200 is not designed for use with hot liquids. It is recommended to use it with cold or room-temperature liquids only. -
Q: What should I do if the pump is not working?
A: If the pump is not working, check the power connection and ensure that all components are properly assembled. Prime the pump by pouring a small amount of liquid into the Cylinder (82362) and try activating it again.
Fountain Pump FP-200 w/ Offset Discharge Tube
Complete View for Reference
PARTS DESCRIPTION
Server Products Inc.
3601 Pleasant Hill Road
Richfield, WI 53076 USA
262.628.5600 | 800.558.8722
SPSALES@SERVER-PRODUCTS.COM
©2023 Server Products Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>