DONNER TSM7-1000 BackBeat Electronic Drum Set User Guide
- June 17, 2024
- Donner
Table of Contents
DONNER TSM7-1000 BackBeat Electronic Drum Set
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Special Statement
Please note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specifications
| Item | Specification |
|---|---|
| Power Supply | DC 9V |
| Consumption | 500mA |
| Dimensions | 500(W) x 370(D) x 157(H) mm |
| Weight | 3.3 kg |
| Working Temperature | 0-40°C |
| Working Humidity | 10-90% |
| Storage Temperature | -10-60°C |
Package Contents
- Drum Module
- Connection Cable
- Power Adapter
- Drum Sticks
- Drum Key
- User Manual
Drum Kit Assembly
The drum kit diagram showcases the assembly of various components including
the snare, toms, hi-hat, hi-hat control pedal, crash cymbal, ride cymbal, kick
pad, and kick pedal. Each part is labeled and corresponds to detailed assembly
instructions provided in the guide.
Module Functions
The drum module has several ports and buttons, each with specific
functions, such as power switch, volume control, start/stop buttons, kit
selection, and connectivity ports for USB, AUX, and headphones. Illustrations
and descriptions explain the use of each feature.
Statement
This product complies with the statutory standards pursuant to the EMC Directive 2014/30/EU, the Low Voltage Directive 2014/35/EU, and the RoHS Directive 2011/65/EU. The Declaration of Conformity for this product can be found at the following website: [URL provided in the document].
Compliance Information
For further compliance information, please visit the website [URL provided
in the document] or scan the QR code provided in the manual. This includes the
EU Declaration of Conformity and important safety information.
WEEE Information
The Waste Electrical and Electronic Equipment (WEEE) directive requires
that products bearing this symbol must not be disposed with household waste.
For proper treatment, recovery, and recycling, please take this product to
designated collection points where it will be accepted free of charge.
Manufacturer Contact Information
Manufacturer: Shenzhen Donner Technology Co., Ltd. Address: 2/F, Building
H, Juyin Industrial Park, #1 Ganli Road, Buji Street, Longgang District,
Shenzhen, China. Post Code: 518112 Email:
service@idonner.eu
FAQ
How do I set up the BackBeat Electronic Drum Set TDS-1000?
Refer to the ‘Drum Kit Assembly’ section for detailed instructions on how to assemble your drum set.What should I do if I experience interference with my equipment?
Try the measures listed under the ‘Special Statement’ section to mitigate any interference issues.What are the specifications of the BackBeat Electronic Drum Set TDS-1000?
Refer to the ‘Specifications’ section for details on power supply, consumption, dimensions, weight, and operating conditions.What items are included in the package?
The package contents are listed under the ‘Package Contents’ section, including the drum module, connection cable, power adapter, drum sticks, drum key, and the user manual.Where can I find information on the drum module functions?
Information on the functions and use of the drum module can be found in the ‘Module Functions’ section.Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>