DONNER DTW-E10 Dobuds One True Wireless Earbuds User Manual
- June 5, 2024
- Donner
Table of Contents
DTW-E10 Dobuds One True Wireless Earbuds
User Manual
USER MANUAL
Dobuds ONE Ture Wireless Earbuds
Welcome to Donner
We are very grateful to have you purchasing our product.
Please take a few minutes to read the instructions for operating this product,
which will show you how to use It and explain the function and operation of
the device, ensuring a trouble-free Installation.
Please keep these operating instructions properly for future reference.
IN THE BOX
PRECAUTIONS
- Please read the following in detail first before operation. Hearing Comfort
- To prevent damage to your hearing, please do not raise the volume too high. Listening to loud sounds for an extended period may cause temporary or permanent hearing loss.
Traffic Safety
- Do not use headphones while walking, driving, or cycling, which may cause traffic accidents.
Placement
- Do not store it in the following environments: Direct sunlight, high temperature, excessive humidity, excessive dust, and strong vibration.
PRODUCT OVERVIEW
Charging Case
WEARING
CHARGING
Fully charge the battery before using the earbuds for the first time or when they have been unused for extended periods.
BLUETOOTH PAIRING
Open the charging case, the earbuds will be wakened up, and enter the BT pairing status.| Activate Bluetooth on your device. Search and select “Donner Dobuds ONE” in your device settings to connect.| Pairing: Blink Blue and White Connected: Blink White
CONTROLS
__
| Power On| Auto: Take out from the charging case Manually: Tap and hold the
MFB for 1s
---|---|---
| Power Off| Auto: Place back into charging case
| Play/Pause| Double-tap the MFB
| Volume-| Single tap the left MFB
| Volume+| Single tap the right MFB
| Previous Track| Press and hold left MFB for 1.5s
| Next Track| Press and hold right MFB for 1.5s
| Answer A Call| Double-tap the left/right MFB
| Hang Up A Call| Double-tap the left/right MFB
| Reject A Call| Long press the left/right MFB for 1.5s
| Mode Switch| 1, To switch ANC mode/Transparency mode/ Normal mode, triple-
tap the right MFB.
2. The ANC can be adjusted through Donner App.
| Activate /Off Voice Assistant| 1. Triple-tap the left MFB when the TWS
connection succeeds
2. Triple-tap the left/ right MFB when in one-pairing mode
| Three-way Calling| 1. To decline the second call while on a call, long tap
the left/right MFB for 1.5s.
2. To answer the second call while on a call, triple-tap the left/right MFB.
To switch between the current call and the second call, once triple-tap the
left/right MFB.
3. To cancel dial the new call and continue with the current call, double-tap
the left/right MFB.
4. To end the current call and answer the second call that is on hold before,
double-tap the left/right MFB
Note:
1. The volume can be adjusted during a three-way calling.
2. This function is only supported by some mobile phones that can handle two
calls.
3. Two calls function can be operated when only an earbud using.
RESET
Try the following steps if the earbuds cannot properly pair with each other or with other devices.
-
Place the earbuds in the charging case and leave the case open.
-
Press and hold the reset button on the case for 3s until both indicators blink in white and blue. Reset is completed.
SPECIFICATIONS
| Model | DTW-E10 |
|---|---|
| Bluetooth Version | Bluetooth 5.2 |
| Paired Name | Do buds ONE |
| Operation Mode | Touch control |
| Charging Port | Type-C |
| Operating Range | ≥10m (No obstacles between) |
| Talk/Play Time | Earbud |
About 6.5H (ANCON)
With charging case| About 32H (ANC OFF)
About 26H (ANCON)
Charging Time| ≤1.5H
Battery Capacity| 55mAH(Earbuds)
520mAH(Charging case)
THD+N(PCBA)| <1%
Donner Control APP
https://control.donnermusic.com/download
For more functions and detailed operations, please download the Donner Control
App for experience Scan QR code to get the app’
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
RF Exposure Information The device has been evaluated to meet general RF
exposure requirements. The device can be used in portable exposure conditions
without restriction.
ISED Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device. The
digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with Canadian radiation exposure limits set forth for
an uncontrolled environment.
RF Exposure Statement
This equipment should be installed and operated with a minimum distance of 0cm
between the radiator & your body.