Danfoss Shut off Valve and Strainer Installation Guide
- June 3, 2024
- Danfoss
Table of Contents
Danfoss Shut off Valve and Strainer Installation Guide
PLEASE NOTE!
To protect the top gasket the bolts are not tightened to the full torque from
factory.
A new gasket has been inserted after pressure testing in the factory and the bolts are only partly tightened.
No matter which method of mounting is used the bolts must be retightened to the full torque indicated in the instruction before plant pressure test or commissioning.
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, online or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material. Danfoss
reserves the right to alter its products without notice. This also applies to
products ordered but not delivered provided that such alterations can be made
without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/5 or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/5. All
rights reserved.
Support
Info for UK customers only:
Danfoss Ltd., 22 Wycombe End, HP9 1NB, GB
Danfoss A/S
Climate Solutions
danfoss.com
+45 7488 2222
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>