pivo NPVS Pod Active Smartphone Camera Mounting Pod with Remote User Guide
- June 6, 2024
- Pivo
Table of Contents
pivo NPVS Pod Active Smartphone Camera Mounting Pod with Remote User Guide
POD Overview
- Smartphone Holder
- LED Indicator
- Power Button
- Extendable Legs
- Grip Fastener
- Micro USB charging port
- Bubble Level
- 1/4” Screw Thread
- Height (without mount): 5cm /2 inches Bluetooth: BLE 4.0
- Maximum load : 1kg Battery: 500 mAh
- Weight: 176g / 6.2 ounces Charging: Micro USB, 5VDC, 0.5A
Charging the POD
LED Indicator Status
Quick Start Guide
Create an account
- Open Pivo APP and tap “Yes, I got Pivo”
- Create a Pivo account using a valid email address
- Tap Create account under the Log in button
- Fill out the Sign up form
- Confirm your registration by email
- Go back to the App and Log in into your new account
- Tap “Allow” permission to microphone, photo album and voice recognition
Pair your smartphone
- Turn your smartphone on and enable the Bluetooth settings
- Press and hold the power button for 3 seconds until the LED light turns BLUE
- In the App, tap “Connect” and follow the instructions on the screen to finish the pairing process.
Position your phone
- Place your phone onto the Smartphone holder
- Tighten the grip fastener to secure your phone
Visualize settings and menu
- Swipe to the left to visualize settings
- Swipe to the right to visualize the menu
- For detailed tutorials about how to use each mode, please visit help.getpivo.com
Remote Overview
For detailed information and manual about how to use the remote, please visit help.getpivo.com
Pairing the Remote
The Remote comes already paired and ready to use. However, if the Remote becomes disconnected or if the batteries are replaced, the Remote needs to be paired as follows:
- Press the power button 3 times in quick sucession. The LED indicator will turn white, indicating that the remote pairing mode is ready.
- Press and hold the “+” button on the Remote until you hear 3 quick beeps. This sound indicates that the Remote pairing is complete.
Control Settings
With your Remote, you have control over various core settings of your POD including, rotation speed, rotation direction, shooting mode, shutter button, and more.
- Up to 15 meter operating range
- Can be paired to multiple Pivo PODs
- Comes with 1 replaceable 3V battery (coin type)
- For video instructions visit the Pivo YouTube offi cial channel at www.youtube.com/c/pivoofficial
- For downloadable version of this manual, go to help.getpivo.com
Additional Information
For video tutorials, visit our official YouTube Channel www.youtube.com/c/pivoofficial
Need more product information? Scan the QR code as shown bellow or visit our support page help.getpivo.com
2019 3i Inc. All rights reserved.
3003 North 1st Street San Jose, California CA 95134
[email protected]
www.getpivo.com
Social media @getpivo
FCC ID: 2AS3Q-PIVORC1
FCC Information to User
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
Product Description
Operating Frequency 2 440 MHz (Only Tx)
RF Output Power -9.67 dBm
Number of Channel 1 Channels
Modulation Type GFSK
Antenna Type PCB Antenna
Antenna Gain 0.00 dBi
Rated Supply Voltage DC 3.0 V