DONNER Cyclops 5W Wireless Small Electric Guitar Amplifier Owner’s Manual
- June 5, 2024
- Donner
Table of Contents
DONNER Cyclops 5W Wireless Small Electric Guitar Amplifier
Specifications
- Input Impedance: 470k0hm
- Power: 5W RMS
- Speaker Size: 3″
- Frequency Response Range: 40Hz-16kHz
- Power Supply: DC 9V,M battery x8, or USB 5V (supports power bank)”
- BTVersi,;,n: BT5.0
- Working R.inge: ..:1om
- Current Consumption: DC 9V: 120mA (static} /900mA(maximum) USB 5V: 180mA (static:) /2A (maximum)
- Dimension: 175108.7148.Smm
- Weight: 1472g
“This unit l’fl1JUH91l minimum 1A WTl’flnl: Wffllln supplied by DC 9V adap/Br and 2A WTl’flnl: whsn supli8d by USB prmrK. Lawer than recommended cum,nt wlll cause unit malfunction.
Features
- Watt output
- Amplifier models (Clean x2 – Overdrive x2 – Higa in x:2 – Flat)
- Effects – Mod x2 (Chorus/Tremolo), Deley x2 (Warm/ Pure), Reverb x2 {Room/Plate) e40 drum patterns (incl. 10 metronome types)
- Tap tempo for controlling drum tempo
- BT audio function
- Runs with W power adapter, USB bus power, ore M size batteries
Overview
Ampllfler Models
Cyclops gives you seven amplifier models: six guitar amps models (based on
world famous classic/boutique/ modern amplifiers) and a “flat” model with an
unprocessed transparent sound.
-
Beef Up Your Tone
Cyclops offers 3 types of effects: mod, tlelay, reverb. Each type gives you two selections, and one-knob control makes ii easy to use. Tweak them and add some spacious dimensions to your ton el -
Wireless Audio Playback
Cyclops features BT audio function so that you can pair It with your phone and then enjoy yourfavol1te songs on the fly. -
eooI Retro Deelsi n
Cyclops is a fresh design drawn from retro elements. H will add luster to your home no matter where you put ill
Precautions
READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a convenient place for future reference.
Power Supply
-
Always use a DC 9V center negative AC adapter. Use of an adapter other than that specified could damage the unit or cause malfunction and pose a safety hazard.
-
Always connect the A.C adapter to an AC outlet that supplies 1he rated voltage requir&d by the adapter.
Disconnect the AC adapter from the AC outlet when during lightning storms or not using the unit for an extended period. -
Carefully read the safety indications on the batteries before use.
-
When not using the unit for an extended period, remove the batteries from the unit. If battery leakage should occur, thoroughly wipe lhe battery holder and the battery terminals to remove battery fluid.
-
Close 1he battery holder cover when using the unit.
Connections
Always tum off the power before connecting or disconnecting. Make sure to
disconnect all cables and AC adapter before moving the unit. Tllis will help
prevent malfunction and damages.
Environment Considerations
Avoid using the unit in any of the following conditions that could cause
malfunction:
- Extremely hot or cold places
- Under direct sunlight
- Magnetic fi91da
- Near heaters and other heat sources
- Sandy or dusty pieces
- Places that are extremely humid or exposed to splashing water
- Plaoes with Iota of vibrations
Electrical interference
Devices that every susceptible to interference or that emit powerful
electromagnetic waves (e.g. radios and TVs) should not be placed near this
unit, as interference could occur. Electromagnetic: interference could cause
malfunction and could corrupt or destroy date. Always operate this unit at a
suitable distance from these devices.
Handling
Do not apply excessive force to the switches end other controls, exposing the
unit to strong impacts, which could cause it to break. Do not put foreign
objects or liquids into the unit. Never open the case or attempt to modify the
product in any wey since this can result in damage to the unit Clean only with
a soft, dry cloth.
Connection & Controls
- INPUT Jack: 1/4″ mono audio jack, for conn8Cling guitar.
- DRUM VOL Knob: Controls the drum output level.
- MOD Knob: Rotate to select modulation effects and adjust the rate/ depth.
- DELAY Knob: Rotate to eelact. delay effects and adjust the delay time.
- REVERB Knob: Rotate to select reverb effects end adjust the revert> mix.
- LED Screen: Displays various infonnation.
- POWER Switch: Switches Cyclops ON/ OFF.
- ► /■ Button: Tap to slarVstop drum rhythm playback. Hold to select drum styles.
- TAP Button: Tap to change drum tempo. Hold to enable tuner.
- AMP Knob: selects amp models.
- VOL Knob: Controls the amplifier output level.
- TONE Knob: Abjusta the amp tone brightness.
- GAIN Knob: Adjusts the amp gain.
- BT Status LED: Indicates BT status:
- Flashing: stand by – Ready to pair
- Solid Light: Connected
- MASTER Knob: Adjusts the overall output volume.
- DC SIV Jack: For power supply, use a 9–Yolt DC regulated by A.C adapter, 1A{plug polarity is positive on the barrel and negative in the center}
- Jack: 1/8″ ha9dphone ouq;>ut.
- AUX IN Jack; Connect external devic:es such as mp3 playera for audio playback. @ USB Jack: For USB 5V (2A.) power supply or firmware update.
- Battery Hokier: For installing batteries (6 xAA batteries).
How To Use BT Audio
Connect BT will be ready to pair when Cyclops is on. Activate BT function on
your mobile device and then select “DONNER CYCLOPS” when ii appears on the
device I isl When connected, the BT LED will become solid.
BT Volume: Use your mobile device to control the BT audio volume. disconnect:
Disconnect “DONNER CYCLOPS” on device list on your mobile device to
disconnect. You can also tum off BT switch on your mobile device to
disconnect.
Rhythm List
| Displa y | Rhylhm Type |
|---|---|
| 0 | Pop 1 |
| 1 | Pop 2 |
| 2 | Pop 3 |
| 3 | Pop4 |
| 4 | Pop5 |
| 5 | Rock 1 |
| 6 | Rock 2 |
| 7 | Rock 3 |
| 8 | Rock4 |
| 8 | Rock 5 |
| Display | Rhylhm Type |
|---|---|
| 0 (With first l’!Jhl) | Fun 1 |
| 1 (With first light) | Funk 2 |
| 2 (With first l’!Jhl) | Funk 3 |
| 3 (With first l’!Jhl) | Funk 4 |
| 4 (W ith first li ght) | Funk 5 |
| 5 (Wit h fir st l’!Jht) | Metal 1 |
| 6 (Wit h firsl light) | Metal 2 |
| 7 (With first light) | Metal 3 |
| B (With first l’!Jhl) | Metal 4 |
| 9 (W ith first light) | Metal 5 |
| Display | Rhylhm Type |
|---|---|
| 0 (With second light) | Bules 1 |
| 1 (With second light) | Bules 2 |
| 2 (With second l’!Jht ) | Bules 3 |
| 3 (W ith second light) | Bules 4 |
| 4 (With secor”ld l’!Jh l) | Bules 5 |
| 5 (W ith second light) | Fusion 1 |
| 6 (With second light) | Fusion 2 |
| 7 (With second light) | Fusion 3 |
| 8 (With second light) | Fusion 4 |
| 9 (With second light) | Fusion 5 |
| Display | Rhylhm Type |
|---|---|
| 0 (With third light) | Metro 114 |
| 1 (With third light) | Met ro 214 |
| 2 (With third light) | Met ro 314 |
| 3 (With third light) | Met ro 414 |
| 4 (With third l’!Jht ) | Metro 514 |
| 5 (With third light) | Metro 614 |
| 6 (With third light) | Met ro 7/4 |
| 7 (With third light) | Met ro 61B |
| 8 (With third light) | Met ro 716 |
| 9 (With third light) | Met ro 9/B |
Drum Rhythm
- Press the►/■ button to start or stop drum play.
- Hold the ►/■ button to enter drum rhythm menu, then preee the button repeatedly lo select a drum rhythm type. eRotate the DRUM VOL knob to adjust drum volume.
- Press TAP button to set drum tempo. The button LED will pulse to indicate the drum tempo you set.
Tuner
Hold TAP button 2 seconds to enable the tuner, Tlle note name appears on the
screen (the dot on the bottom right of the saeen stands for “sharp”), and the
pitch accuracy is indicated by the LEDs. When tuner is activated, Cyclops will
b9 muted. Presa TAP button to exlt tuner.
Amplifier List”
| Name | Based on | Cab Sim |
|---|---|---|
| Jazz CL | Legendary Jazz Clean amp | 2×12 |
| TWO LUX | Fende r” Tweed Deluxe | 2×12 |
| UK800 | Marshall& JCM800 | 4, 12 |
| Voxx JOT | Va x• AC30 Top Boost | 2×12 |
| PV 51 | Peavey” 5150″ | 4, 12 |
| US RECT | Mesa/Boogie& Dua l Rectifier | 4<12 |
| FLAT | Flat Du1put |
“The mentioned manufacturers and product names are trademarks or registered trademarks of their respective oimers wh/cfl were used merely to identify the sound character of this product.
FCC statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause hamful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will no occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC ID: 2AVTN-EC1217
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>