HUDSON VALLEY L6170-AGB Noho Two Light Floor Lamp Instruction Manual

June 16, 2024
HUDSON VALLEY

HUDSON VALLEY logo

Instruction Manual

L6170-AGB Noho Two Light Floor Lamp

WARNING/CAUTION

  • – DISCONNECT POWER BEFORE RE-LAMPING OR WIRING THE FIXTURE. READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION.
  • TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. THE INSTALLATION ANDMAINTENANCE OF THIS UNIT SHOULD BE COMPLETED BY A LICENSED ELECTRICIAN OR CERTIFIED FACTORY TRAINED TECHNICIAN.
  • CALIFORNIA PROP 65: THIS LIGHTING FIXTURE CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS, AND/OR OTHER REPRODUCTIVE HARM.WASH HANDS AFTER USE.
  • UNPACK FIXTURE, PARTS AND PARTS BAG(S) BEFORE DISCARDING THE CARTON. MAKE CERTAIN THAT ALL PARTS ARE FOUND. INSPECT THE FIXTURE PRIOR TO INSTALLATION FOR ANYDAMAGE. HVLG DOES NOT PAY OR REIMBURSE ELECTRICIAN FEES. FIXTURE MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. SEE WARRANTY FOR EXCEPTIONS.
  • PLEASE CLEAN WITH A SOFT, DRY CLOTH ONLY! DO NOT USE CLEANSERS.

HUDSON VALLEY L6170-AGB Noho Two Light Floor Lamp

PART(S) REPLACEMENT PART NAME NUMBER
A FINIAL FIN-L6170
B SHADE SHD-L6170

FIXTURE INSTALLATION

  1. Screw the FIXTURE ASSEMBLY (C) on the TUBE (F) of the fixture.
  2. Screw the TUBE (F) on the BASE (G) of the fixture.
  3. Screw the BULB (D) up into the SOCKET of the fixture. THIS FIXTURE IS RATED FOR MAX 25 WATTTYPE A LAMP. DO NOT EXCEED THE RECOMMENDED WATTAGE!
  4. Place the SHADE (B) over the FIXTURE ASSEMBLY (C) and secure with the FINIAL (A).
  5. Plug the CORD (H) into the wall outlet. Use the PULL CHAIN (E) to turn the fixture on and off.

www.hvlgroup.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HUDSON VALLEY User Manuals

Related Manuals