WAMPLER Ego Compressor Pedal Instructions
- June 4, 2024
- WAMPLER
Table of Contents
WAMPLER Ego Compressor Pedal Instructions
WAMPLER Ego Compressor Pedal
From silky smooth sustain to full out country chickin’ pickin’ territory, the
Wampler Ego
Compressor is the most versatile compressor pedal on the market …
Volume:
Controls the total output volume.
Attack:
Controls how quickly the compression action starts to take effect. Note that
the more clean signal used with the “blend” control, the less effect this will
have.
Blend: Allows you to mix the clean signal with the compressed signal. 100%
clean is all the way counterclockwise, 100% compressed is all the way
clockwise.
Tone:
Controls the amount of presence in the compressed signal only. This has no effect on the clean signal controlled by the “blend” control. Sustain: Controls the amount of sustain and compression . Note that the more clean signal used with the “blend” control, the less effect this will have.
Power:
This pedal was designed around the usage of a 9v or 18vDC power source and is intended to sound its best at 9V. To avoid damage to the pedal, do not exceed 18VDC, do not use center pin positive adapters and do not use AC power. Using an incorrect power adapter can lead to damage and will void the warranty on the pedal. This pedal draws 14mA at 9Vdc. The warranty begins at the point of purchase.
WAMPLER
Pedals limtted Warranly WAMPLER offe~ a five (5) year worronly to the original purchaser that this WAMPLER product will be free from defects in material ond workmanship. A doted soles receipt will establish coveroge under this warranty. lhis worronty does not cover service or ports to repair domoge caused by occident, negle<t, normal cosmetic weor, disaster, misuse, abuse, negligence, inadequate pocking or shipping procedures and service, repair or modmcotions to the product, which hove not been authorized or approved by WAMPLER. If this product is defective in moteriols or workmanship os worronted above, your sole remedy shall be repair or replacement as provided below.
RETURN PROCEDURES
In the unlikely event that o defect should occur, follow the procedure
outlined below. Defective products must be shipped, together with o dared
soles receipt, freight pr&j)oid and insured directly to WAMPLER SERVICE DEPT·
. A Return Authorization Number must be obtained from our Customer Service
Deportment prior to shipping the product. Products must be shipped in their
original packaging or its equivalent; in any case, the risk of loss or damage
in transit is to be borne by the purchaser. The Return Authorization Number
must appear in large print directly below the shipping address. Always include
o brief description of the defect,
along with your correct return address and telephone number. When emailing to
inquire about a returned product, always refer to the Return Authorization
Number. If WAMPLER determines that the untt was defective in materials or
workmanship at any time during the worronty period, WAMPLER hos the option of
repairing or replacing the product at no additional charge, except as set
forth below. All replaced ports become a property of WAMPLER. Products
replaced or repaired under this worronty will be returned via ground shipping
within the Untted Stotes·freight prepaid. WAMPLER is not responsible for costs
associated with expedited
shipping, either to WAMPLER or the return of the product to the customer.
INCIOEKTAL OR CONSEQUENTIAL DAMAGE
In no event is WAMPLER liable for any incidental or consequential damages
arising out of the use or inobilily to use of any WAMPLER product, even if
WAMPLER or a WAMPLER dealer hos been od~sed of the possibility of such
damages, or any other claim by any other party. Some stoles do not allow the
exclu~on or limttotion of consequential damages, so the above limitation and
exclusion may not apply to you. This worronty gives you specific legal rights
ond you may olso hove other rights which moy vary from stole to stole.
FOR YOUR PROTECTION
Please complere the online worronty registration within (10) ren days of the dote of purchase so that we moy contact you directly in the event o safety notification issued in occordonce with the 1972 Consumer Product Safety Act.
This equipment hos been tesred and found to comp~ with the limits for a Closs
B digttol device, pu~uont to port 15 of the FCC Rules. These limits ore
designed to pro~de reasonable protection against harmful interference in a
r~dentiol instollotion.
This equipment gene rotes, uses ond con rodiote rodio frequency energy and, ~
not installed and used in accordance with the instructions, may cause harmful
interference to rodio communications.
However, there is no guarantee that inrerference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, whkh con be determined by turning the equipment
off and on, the user is encouraged to try to correct the inrerference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equiJlllent into on outlet on a cirruit ctrfferent from that to which the receiver is connecred.
- Consult the dealer or on experienced radio/ TV rechnicion for help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment..
CUSTOMER SUPPORT
Our dedicored staff is ready to help you with any worronty or product
questions· please email us at help@womplerpedols.com or coll us at
765-352-8626
Please remember lo register your pedal as soon as possible after purchase al
the following web page lo ensure quicker service if you should ever need lo
make a warranty claim: www.RegislerYourWompler.com
For a more in depth manual visit: www.wamplerpedals.com/downloads.