THORN AFP2 Large Spaces LED Projector Instruction Manual
- June 16, 2024
- THORN
Table of Contents
THORN AFP2 Large Spaces LED Projector
Product Information
Specifications
- Type: AFP2 S-M-L
- Installation Instructions:
- LED Class: I
- Class: II
- Impact Protection Rating: IK08
- Ingress Protection Rating : IP66
- Regulations : Australia / New Zealand
- Wind Speeds: Up to 250 km/h
- Tilting Limitation: Yes
- Optic Type: Asymmetric Optic
Product Usage Instructions
Installation
To reduce the risk of strangulation, it is important to effectively fix the
flexible wiring connected to the luminaire to the wall if the wiring is within
arm’s reach. Follow these steps for installation:
- Choose a suitable location for the luminaire.
- Ensure that the wiring is securely fixed to the wall, especially if it is within arm’s reach.
- Follow the provided installation instructions specific to your country
Positioning
If you have a luminaire with a clear optic, it should be positioned in a
way that prevents prolonged staring into the luminaire at a distance. This is
to avoid discomfort or potential eye damage. Follow these guidelines:
- Place the luminaire in a location where it does not directly face areas where people may be present for extended periods.
- Consider the angle and direction of the light to minimize direct exposure to the eyes.
FAQ (Frequently Asked Questions)
-
Q: What are the impact and ingress protection ratings?
A: The luminaire has an impact protection rating of IK08, which means it is resistant to mechanical impacts. It also has an ingress protection rating of IP66, indicating it is protected against dust and powerful water jets. -
Q: What are the wind speed limitations for this luminaire?
A: The luminaire can withstand wind speeds of up to 250 km/h. -
Q: Does the luminaire have a tilting limitation?
A: Yes, the luminaire has a tilting limitation in place.
Installation instructions
To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach
Instructions
- Replace any cracked protective shield.
- Class II luminaires must be installed so that exposed metal work of the luminaire is not in contact with any part of the electrical installation connected to a protective conductor.
- WARNING: Class I luminaires must be earthed.
- This luminaire operates at mains voltage which must be switched off before intervention in control gear.
- Any modification to this luminaire is forbidden.
- Lighted objects nearer than the minimal distance in the is forbidden.
Thorn Lighting is constantly developing and improving its products. The right
is reserved to change specifications without prior notification or public
announcement.
© Thorn Lighting
Documents / Resources
|
THORN AFP2 Large Spaces LED
Projector
[pdf] Instruction Manual
AFP2 S-M-L, AFP2 Large Spaces LED Projector, AFP2, Large Spaces LED Projector,
Spaces LED Projector, LED Projector, Projector
---|---