THORN Basicdim Ild Programmer Instructions

THORN Basicdim Ild Programmer

Specifications

• Product Name: basicDIM ILD
• Functionality: Provides the basis for an easy-to-use and cost-effective lighting system with motion detection
• Control: Allows individual adjustable motion detection profiles
• Control Method: Remote control for switching luminaries on and off

Motion Detection and Illuminance Adjustment:
When movement is detected, the sensor triggers an adjustable motion detection profile in the control unit. The illuminance from the lighting system is adjusted based on changes in natural ambient light.

Switch-On Delay
Set the time after which the lighting is switched off after the switch delay using the timedelay parameter.

Second Light Value
Choose whether the light is to be switched off after the switch delay or dimmed to the second light value. Adjust the light value and dwell time via the whenvacant and sec.level parameters.

Bright-Out Function
If the nominal illuminance is exceeded by more than 150% for 10 minutes, the lighting is switched off. It will switch on again when the light value falls below the set point. This function is indicated by a green LED on the sensor.

Installation Instructions

basicDIM ILD
The basic DIM ILD provides the basis for an easy-to-use and cost-effective lighting system withmotion detection.
When the sensor detects movement it triggers a individual adjustable motion detection profile in the control unit. As the amount of natural ambient light changes the illuminance from the artificial lighting system is adjusted.
The connected luminaries can be switched on and off via remote control.

Switch-on delay
This is the time after which the lighting is switched off after the switch delay. It can be set via the ‘1ime delay” parameter

Second light value
On the basicDIM ILD you can set whether the light is to be switched off after the switch delay or dimmed to the second light value. The light value and the dwell time (how long the value can be held) can be set via the “when vacant” and “sec.level” parameters.

Bright-out
If the nominal luminance (eg 500lux) is exceeded for 10 minutes by more than 150% (e.g. 7501ux) the lighting is switched off even if the motion is detected. The lighting is switched on again when the measured light value falls below the setpoint. The bright-out function is displayed by a green status indication LED at the sensor.

Bright-off delay
If the system is switched off manually via the remote control the motion sensor is deactivated at the end of a 10 minutes delay if motion has not been detected the motion sensor is activated again. If the sensor detects motion during the “ManualOff’ delay, the time will be reset to the start.

Auto / Presence Detection

Manual Operation

Pull switch Option

Presence Detection &
Switch Operation Key
SP – Short Pull (>500-G00ms)
LP – Long Pull

• 2xSP Overrides setpoint New light level is stored

Please ensure that the detection range of the sensor lies in the lighting area of the controlled luminaries.
Please ensure that the detection ranges of the sensors do not overlap. This may have influence to the lighting control.
Heaters, fans, printers and copiers located in the detection zone may cause incorrect presence detection.

Presence / Motion Detection

Example for light and motion detection area at height of 1.7 m:

1.7

m

| 1.3

m

| 0.7

m

| 1.0

m

| 3.0

m

2.0

m

| 1.6

m

| 0.8

m

| 1.2

m

| 3.6

m

2.3

m

| 1.8

m

| 0.9

m

| 1.3

m

| 4.1

m

2.5

m

| 2.0

m

| 1.0

m

| 1.4

m

| 4.5

m

2.7

m

| 2.1

m

| 1.1

m

| 1.6

m

| 4.9

m

3.0

m

| 2.3

m

| 1.2

m

| 1.7

m

| 5.4

m

3.5

m

| 2.7

m

| 1.4

m

| 2.0

m

| 6.3

m

4.0

m

| 3.1

m

| 1.6

m

| 2.3

m

| 7.2

m

Remote Control IRG

Ordering data

basicDIM ILD G2 Programmer

Product Description

• Optional infra-red programming unit for basicDIM ILD G2 Setting of predefined parameter values
• Programmable functions such as light level. time delay.
• PJR.. bright-out. power up and grouping
• IR range up to 20 m
• Link to manual Anleitung: http://www.tridonic.com/qrILD2Prog

Ordering data

Documents / Resources

| THORN Basicdim Ild Programmer [pdf] Instructions
Basicdim Ild Programmer, Basicdim Ild, Programmer
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>