PATPET 710 Dog Grooming Clipper User Manual

Quick Start Pet Grooming Clipper: 710
User Manual
Before using please read the manual carefully and keep it properly for reference

Product Diagram

Package Contents

Product Specification

Charging Method

1. Put the connecting plug into the clipper slot.
2. Put the USB plug into USB adapter (mobile phone adapter).
3. Put the adapter plug into electrical outlet after confirming the clipper is power off.

Indicator Instruction

• Indicator instruction when charging
1. The battery is charging when the “ ” light is blinking.
2. The battery is fully charged when the “full” light is on.
• Indicator instruction when using
1. All lights are off when using.
2. The “ ” light quickly blinking when the battery power is low, please charge the clipper.

Chorging Instruction

• Charging protection function
  When fully charged, clipper will automatically cuts off power. the charging protection function starts to work to prevent damage from overcharging.
  When battery completely runs out, the over-discharging protection function will be automatically activated to prevent the battery from overdischarging and protect battery lifespan.
  *Notice:
  1. The best charging temperature: 5°C 40“C.
  2. The battery will reach an optimal condition after being fully charged for 3-4 times.
  3. It’s normal to generate some heat while charging and using the clipper. 4. Please fully charge the clipper before the first time use.

Looding & Unlooding Comb

• Loading Comb Hold both sides, match the slot and push up. (avoid losing or dropping)
• Unloading Comb Push away the locked part of the comb on both sides. (do not press the front or back part to not damage the comb)
  

Cleaning

1. Before unloading the blade, make sure you have switched off the clipper. Use thumb to push the blade as the illustration above.

2. Wash off the hair between the upper blade and the lower blade. (Please do not take apart the spring of the blade in case it breaks down)

3. Clean the hair in the clipper by brush.

4. After cleaning the blade, add some lubricant between the upper blade and the lower blade.
   Otherwise, the cutting edge will go dull, make a weird noise, give out heat, and lower the performance.

5. Replace the blade (There must be a click sound if you match it right)

Coutions

1. Do not tear down the clipper at random.
2. Do not clean product by water flush, and keep the unit away from damp situation.
3. Do not use any corrosives such as alcohol, gasoline etc. to clean the surface.
4. Avoid being charged above 40’C or below 0’C.
   *If the product is not used for a long time, please charge it once at least every three months.
   Disposal of Battery The inside is rechargeable battery. Please take the battery out before discarding it and dispose the battery in an environment- friendly way.

Quolity Moving the World

Shenzhen Patpet Technology Co, Ltd.
https://patpet.com/
 Become a dealer: inquiry@patpet.com
 After-service: support@patpet.com
@PatpetDogCollar
 Youtube Video Guide

Mode in Chino

References

• PATPET

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>