REOLINK E1 Outdoor Pro 4K Outdoor Security Camera User Guide
- June 17, 2024
- reolink
Table of Contents
Operational Instruction
Apply to: E1 Outdoor Pro
@ReolinkTech
https://reolink.com
What’s in the Box
Camera Introduction
- Reset Button
- Press for more than five seconds to restore the device to default settings. 2. Micro SD Card Slot
- Rotate the lens to find the reset button and the SD card slot. 3. Daylight Sensor 4. Spotlight 5. Infrared Lights 6. Lens 7. Status LED 8. Built-in Mic 9. Speaker 10. Power Cable 11. Network Cable
Different states of the status LED:
| Red Light: WiFi connection failed | Blinking: Standby status |
|---|---|
| Blue Light: WiFi connection succeeded | On: Working status |
Set up the Camera
Wired Setup
It is recommended that the initial setup be completed with the Ethernet cable.
You may follow the steps below to set up your camera.
Step 1 Connect the camera to a LAN port on your router with an Ethernet cable.
Step 2 Use the power adapter provided to power on the camera.
Step 3 Download and Launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.
• On Smartphone
Scan to download the Reolink App.
https://reolink.com/wp-
json/reo-v2/app/download
• On PC
Download path of the Reolink Client: Go to https://reolink.com > Support >
App & Client.
Wireless Setup
If you set up Camera without the Ethernet cable, you may follow the steps
below.
NOTE: This device supports 2.4 GHz and 5 GHz Wi-Fi networks. It is
recommended to connect the device to 5 GHz Wi-Fi for a better network
experience.
Step 1 Use the power adapter provided to power on the camera.
Step 2 Launch the Reolink App, click the “ ” button in the top right corner to
add the camera. Scan the QR code on the device and follow the onscreen
instructions to finish initial setup.
NOTE: If you access the camera via the Reolink Client, you may click the Add Device icon and choose the UID option to enter the UID of your camera. The UID is on the camera body (right below the QR code).
Install the Camera
Mount the Camera to the Wall
For outdoor use, the camera must be installed upside down for better
waterproof performance.
Pull the button of the security mount and unscrew the bracket to separate the two parts.
Screw the bracket to the bottom of the camera.
Drill holes in accordance with the mounting template and screw the security mount to the wall.
Choose a proper direction of the camera and then align the bracket to the security mount and lock the camera in place by turning anti-clockwise.
NOTE: Use the drywall anchors included in the package if needed.
Mount the Camera to the Ceiling
Pull the button of the security mount and unscrew the ceiling bracket from the
mount.
Install the bracket to the ceiling. Align the camera with the bracket and turn the camera unit clockwise to lock it in position.
Troubleshooting
Camera is Not Powering on
If your camera is not powering on, please try the following solutions:
- Plug the camera into another outlet.
- Use another 12V power adapter to power on the camera.
If these won’t work, please contact Reolink Support.
WiFi Connection Failed During Initial Setup Process
If the camera failed to connect to WiFi, please try the following solutions:
- Please ensure your have entered the correct WiFi password.
- Put your camera close to your router to ensure a strong WiFi signal.
- Change the encryption method of the WiFi network to WPA-PSK/WPA2-PSK/WPA3-PSK (safer encryption) on your router interface.
- Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
- Set your password using only the characters on the keyboard.
If these won’t work, please contact Reolink Support.
Specifications
Operating Frequency: 2.4/5GHz Dual-band
Operating Temperature: -10°C to 55°C (14°F to 131°F)
Size: 85×118 mm
Weight: 395g
For more specifications,please visit https://reolink.com/
Notification of Compliance
**** CE Declaration of Conformity
Reolink declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU and
Directive 2014/30/EU.
UKCA Declaration of Conformity
Reolink declares that this product is in compliance with Radio Equipment
Regulations 2017 and Electromagnetic Compatibility Regulations 2016.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be in-stalled and operated
with minimum distance 20cm between the radiator and your body. ISED Compliance
Statements This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions: (1) This
device may not cause interference. (2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
ISED Radiation Exposure statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
NOTE: Operation of 5150-5250 MHz is restricted to indoor use only in
Canada.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other
household wastes. throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
Limited Warranty
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink Official Store or a Reolink authorized reseller. Learn
more: https://reolink.com/warranty-and-return/.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and
Privacy Policy at reolink.com. Keep out of reach of
children.
WiFi Operating Frequency
OPERATING FREQUENCY : (the maximum transmitted power)
2.4GHz: (For 2.4GHz camera only): 2412MHz — 2472MHz ( EIRP < 20 dBm )
5GHz: 5150MHz — 5250MHz ( EIRP < 23 dBm ) 5745MHz — 5825MHz ( EIRP < 14 dBm )
The functions of Wireless Access Systems including Radio Local Area Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are restricted to indoor use only within all European Union countries (BE/BG/CZ/DK/ DE/EE/IE/EL/ES/FR/HR/ IT/CY/LV/LT/ LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/ SE/TR/N O/CH/IS/LI/UK(NI)
Technical Support
If you need any technical help, please visit our official support site and
contact our support team before returning the products,
https://support.reolink.com.
REOLINK INNOVATION LIMITED
FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL
HONG KONG
EC REP CET PRODUCT SERVICE SP. Z O.O. Ul. Dluga 33 102 Zgierz, Polen
UK REP CET PRODUCT SERVICE LTD. Beacon House Stokenchurch Business Park,
Ibstone Rd, Stokenchurch High Wycombe, HP14 3FE, United Kingdom
April 2023
QSG1_A
58.03.006.0012
Documents / Resources
|
REOLINK E1 Outdoor Pro 4K Outdoor Security
Camera
[pdf] User Guide
E1 Outdoor Pro 4K Outdoor Security Camera, E1 Outdoor, Pro 4K Outdoor Security
Camera, Outdoor Security Camera, Security Camera, Camera
---|---
References
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Reolink Official: Security Cameras and Systems for Home & Business
- Warranty & Return – Reolink
- Reolink Support - Official Reolink Help Center