maxpower MPD661L Portable Laptop User Manual

October 30, 2023
maxpower

MPD661L USER MANUAL

maxpower MPD661L Portable Laptop

Read this manual before use

General Function Description

  1. : Short press is previous song/FM channel ; hold the tracking previous key is volume down.
  2. :Short press is next song/FM channel; hold the tracking next key is volume up.
  3.  Light / Mode: Short press is switch to the mode : Aux In →USB\TF → FM → BT ; hold is switch the light effects , double click is control the light On/ Off.
  4. /PAIR /TWS : Short press is Play / Pause; In Bluetooth status , hold press 5 seconds to re-enter the pairing status.; Hold press more than 0.5 seconds to enter TWS status , In FM Status ,Hold to automatic searching radio, Press to mute in FM and Aux .

Panel Function

maxpower MPD661L Portable Laptop - Panel Function

1. Light / Mode
2. Track Previous / Volume Down
3. Play / Pause / TWS/PAIR
4. Track Next / Volume Up
5. TF Card Slot
6. USB slot| 7. Power ON/OFF
8. Type C Charging Port
9. Mic Input
10. AUX IN Port
11. Charge Indicator
---|---

How to charge the speaker

  1. Please plug the Type C charging input into the speaker and the other end of the cable into any USB adapter.

FM Function Description

  1. Short press the mode button to switch FM status.
  2. PLAY/PAUSE break : Long press to automatic searching radio, short press to mute and mute canceled function.
  3. Previous/Next Song Key: Short press for upwards or downwards to the searched broadcasting station.
  4. Note: Please automatic searching radio when first use. Attach USB or AUX cable to enhance FM reception.

Microphone Function Description

  1. You can use the mic once insert it.
    It is suggested to pause and mute the music before using mic.

LIGHTS FEATURE:

  1. This speaker have 3 different light modes
  2. Press the M/light for 3 seconds to switch to different light modes
  3. In order to turn off/on the lights, press the M/light button twice very fast to switch the lights on/off

How to connect to BT

  1. When you turn on the speaker, it is already on the BT mode
  2. Please get your smart device and search for BT device
  3. When you are searching for the BT device, you should see “BOOM-M6”
  4. Please select “BOOM-M6” and your device will be connected
  5. You are now ready to enjoy your music

TWS function:

  1. Bring the two speakers next to each other and make sure they are turned off.
  2. Turn on one speaker and connect that one speaker with the BT how you normally would.
  3. Once that speaker is connected to BT, turn on the second speaker, press and hold TWS/PLAY PAUSE for 0.5s-1s on first speaker and let it go.
  4. You will hear a beep and that means both the speakers are paired and connected
  5. To disconnect the speaker from TWS, press and hold TWS/PLAY PAUSE for 0.5s-1s on first speaker.

Charging Indication Description

  1. when in the low power state that requires charging,Product volume will automatically fall to about 70% of the main volume.
  2. Use DC 5V adaptor for charging , the charging indicator light on, the product is being charged, after fully charging, indicator goes out .
    Note: For the first time, charge it more than 12 hours, if the unit is not used for a long time ; Otherwise it will cause damage to the battery.

Specifications

Power source: DC 5V * 1500mA
FM Frequency: 90-20MHz
Output power: 5W ( RMS )
Rsponse Frequency: 90Hz-20KHz
Speaker size:6.5″3Ω
1
S/N:≥60dB
Note** :Specifications are subject to change for continuous improvement without prior notice.

Items included

Unit Speaker……………………………………….1
User Manual……………………………………….1
Type C Charging wire…………………………1

Caution

  • The AC / DC adaptor and main unit shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases shall be placed on the apparatus and AC / DC adaptor.
  • Minimum distances 20-30 cm around the apparatus for sufficient ventilation.
  • The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper , table , cloths , curtains ,etc.
  • No naked flame sources , such as lighted candles , should be placed on the apparatus.
  • When the mains plug of AC / DC adaptor is used as the disconnect device, the disconnect device shall remain readily operable.
  • To be completely disconnected the power input the AC / DC adaptor shall be disconnected from the mains completely.
  • The AC /DC adaptor should not be obstructed or should be easily accessed during intended use.
  • The use of apparatus in tropical climate.
  • The marking information is located at the bottom of apparatus.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals