TKH BLFG01 Front Glass Installation Guide
- June 16, 2024
- TKH
Table of Contents
Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
BLFG01 Front glass for BL2002LPR and BL2002v2LPR
Installation Instructions
BLFG01 Front Glass
Status: | v1.0 | 7-Dec-23 |
---|---|---|
Revision history
Nr | Date | Remarks |
---|---|---|
1 | 7-Dec-23 | Version 1.0 initial version |
2 |
Note: To ensure proper operation, please read this manual thoroughly before using the product and retain the information for future reference.
Copyright © 2023 TKH Security B.V.
All rights reserved.
BLFG01 Front glass for BL2002LPR and BL2002v2LPR Installation Instructions
v1.0
Nothing from this publication may be copied, translated, reproduced, and/or
published by means of printing, photocopying, or by any other means without
the prior written permission of TKH Security.
TKH Security reserves the right to modify specifications stated in this manual
without prior notice.
Brand names
Any brand names mentioned in this manual are registered trademarks of their
respective owners.
Liability
TKH Security accepts no liability for claims from third parties arising from
improper use other than that stated in this manual.
Although considerable care has been taken to ensure a correct and suitably
comprehensive description of all relevant product components, this manual may
nonetheless contain errors and inaccuracies. We invite you to offer your
suggestions and comments by email. Your feedback will help us to further
improve our documentation.
How to contact us
If you have any comments or queries concerning any aspect related to the product, do not hesitate to contact:
TKH Security B.V.
Platinastraat 65, 2718 SZ Zoetermeer The Netherlands
General : +31 20 462 07 00
E-mail : support@tkhsecurity.com
WWW : https://tkhsecurity.com
TKH Security LLC
5340 Spectrum Drive, Suite C
Frederick, Maryland 21703
United States of America
General : +1 301 444 2200
Email : sales.us@tkhsecurity.com
Replacing Front Glass Instruction
The following instructions explains how to replace the front glass of the Bullet cameras models BL2002LPR series. The procedure should be performed inside a temperature control environment with low humidity and dust free to avoid external agents to enter and stay trapped inside the camera lens compartment where the protective front glass is installed. If external agents enter the compartment, clean them using a microfiber cloth applying soft pressure to avoid lens scratches.
Please follow these instructions to replace the front glass:
- Remove the black decorative panel of the camera using a plastic flat tool and applying outward pressure on the two holes located on the bottom edge of the camera front panel.
- Unscrew the following 4 screws as shown below:
- Remove the black frame that holds the front glass in position.
- Remove the old front glass and replace with a new glass.
- Replace the black frame and its screws to hold the glass and the decorative plastic panel to properly cover the front of the camera.
Platinastraat 65 2718 SZ Zoetermeer The Netherlands
TKH Security B.V. | +31 182 592 333 |
info.nl@tkhsecurity.com | tkhsecurity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>