TKH SECURITY FD2002v2M 2MP Vandal Fixed Dome Camera User Guide
- June 6, 2024
- TKH SECURITY
Table of Contents
- TKH SECURITY FD2002v2M 2MP Vandal Fixed Dome Camera
- Unpack
- Installation Notices
- Connectors
- Camera Cabling
- Waterproof Notice
- Accessing the Camera – DHCP
- Accessing the camera – Fixed IP
- Auto-detect with SDM2
- 1st-time camera login
- 1st time camera login
- Browser-based Viewer
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TKH SECURITY FD2002v2M 2MP Vandal Fixed Dome Camera
FD2002v2M
2MP Vandal Fixed Dome Camera Quick Start Guide
Unpack
Subject to modification. Actual products and accessories may differ in appearance.
Installation Notices
CAUTION
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL ONLY. INSTALLATION
SHALL BE IN ACCORDANCE WITH LOCAL PROCEDURES. THE CAMERA CONTAINS BATTERIES.
DO NOT REPLACE IN RISK OF EXPLOSION. BATTERY REPLACEMENT SHALL NOT BE APPLIED
IN VIEW OF THE RISK OF EXPLOSION. LE REMPLACEMENT DES PILES NE DOIT PAS ÊTRE
APPLIQUÉ AU RISQUE D’EXPLOSION. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS. METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX
INSTRUCTIONS.. FOR “PoE” INPUT CONNECTION, USE ONLY WITH UL LISTED I.T.E WITH
“PoE” OUTPUT. DESCRIPTION FOR THE “PoE” IS INTENDED TO BE CONNECTED TO NOT
EXPOSED (OUTSIDE PLANT) NETWORKS OR EQUIVALENT STATEMENT IN INSTALLATION
INSTRUCTIONS. POUR LA CONNEXION DâÇÖENTREE “PoE”, UTILISER UNIQUEMENT AVEC UN
I.T.E. LISTE AVEC UNE SORTIE “PoE”. LA DESCRIPTION DE “POE” EST CONÇUE POUR
ÊTRE CONNECTÉE À DES RÉSEAUX OR NON ÉNONCÉS (INSTALLATIONS EXTÉRIEURES), DANS
LES INSTRUCTIONS D’INSTALLATION DE L’INSTALLATION.
Connectors
CAUTION
RESET BUTTON TAKES 10 SECONDS TO BE EFFECTIVE. IT WILL RESTORE FACTORY
DEFAULT SETTINGS, INCLUDING IP ADDRESS, USERNAME, AND PASSWORD.
Connector Definition
No. | Connector | Definition |
---|---|---|
1 | Alarm I/O | Alarm I/O connection |
2 | Audio I/O | Line In and Line Out connection |
3
| RJ-45 Port
(Contact Siqura for a compatible PoE injecter.)
|
For network and PoE connections
4| Power(DC 12V)| Power Connection
5| Reset Button| Press the button with a proper tool for at least 20 seconds
to restore the system.
6
|
Micro SD Card Slot
| Insert the SD card into the card slot to store videos and snapshots. Do not remove the SD card when the camera is powered on.
Camera Cabling
Waterproof Notice
Accessing the Camera – DHCP
Accessing the camera – Fixed IP
Auto-detect with SDM2
1st-time camera login
1st time camera login
Browser-based Viewer
CAUTION
IT IS NOT RECOMMENDED TO CONTINUOUSLY (24/7) RECORD WITH THE MICRO SD CARD, AS
THE CAMERA MAY NOT SUPPORT LONG-TERM CONTINOUS DATA READ/WRITE. CONTACT THE
MANUFACTURER OF THE MICRO SD CARD FOR INFORMATION REGARDING THE RELIABILITY
AND THE LIFE EXPECTANCY.