V I V O STAND-V038-W Steel Dual Monitor Desk Mount Instruction Manual
- June 16, 2024
- V I V O
Table of Contents
Dual Ultrawide Monitor Desk
Mount
Instruction Manual
STAND-V038-W Steel Dual Monitor Desk Mount
SKU: STAND-V038/W
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo- us.com/products/stand-v002
https://vivo-
us.com/products/stand-v002
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
[email protected]
www.vivo-us.com
Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
ASSEMBLY STEPS
STEP 1
Loosen knob on Clamp (B).
IMPORTANT NOTE
Monitor mount can be assembled as a Desk Clamp (2a) or Grommet Mount (2b).
Follow steps below for desired mounting method.
STEP 2a – Desk Clamp
Mount Clamp (B) to Pole (A) using M6x16mm Screws (S-A) and 3mm Allen Wrench
(T-A).
Secure assembly to desktop by tightening knob on Clamp (B).
STEP 2b – Grommet Mount
Using a Phillips screwdriver, remove the screw from Clamp (B) and disassemble.
Set Knob (B2) aside.
Mount Grommet Plate (E) to Pole (A) using M6x16mm Screws (S-A) and 3mm Allen Wrench (T-A). Remove adhesive backing from Soft Pad (F) and adhere to Grommet Plate (E).
Secure assembly to gromment hole in desk using Knob (B2) and Support Plate (G), as shown below.
STEP 3
Unfold Swivel Arm (C) and extend into one straight line.
Slide Pole Cable Clip (I) and Swivel Arm (C) onto Pole (A). Secure Swivel Arm (C) in place using 6mm Allen Wrench (T-B). Attach Pole Cap (H) to Pole (A).
Attach Arm Cable Clips (J) to Swivel Arm (C).
STEP 4
Secure VESA Plates (D) to monitors using M4x12mm Thumbscrews (M-A) or M4x30mm
Screws (M-B). M6 Spacers (M-C) may be required.
STEP 5
Slide monitors with VESA Plates (D) onto Swivel Arm (C). Secure VESA Plates
(D) in place using M6 Security Nuts (S-B).
STEP 6
Manage cables using Arm Cable Clips (J) and Pole Cable Clip (I).
ADJUST AS DESIRED
+90° to -90° TILT:
If monitors are sagging or need repositioned, loosen the bolt on the side of
the VESA Head (C1) on Swivel Arm (C). Use 6mm Allen Wrench (T-B) to loosen,
then adjust. Tighten to secure. .
180° SWIVEL:
Lighten pull monitors left or right to adjust swivel.
360° ROTATION:
Lighten pull monitors left or right to adjust swivel.
ADJUST MONITOR HEIGHT
To level monitors, remove M6 Security Nuts (S-B) and tighten or loosen
adjustment screws using 3mm Allen Wrench (T-A). Once level, fasten M6 Security
Nuts (S-B) back into place.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 11/29/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CS T,
our dedicated support team can off er immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
[email protected]
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com
Documents / Resources
| V I
V O STAND-V038-W Steel Dual Monitor Desk
Mount
[pdf] Instruction Manual
STAND-V038-W, STAND-V038-W Steel Dual Monitor Desk Mount, Steel Dual Monitor
Desk Mount, Dual Monitor Desk Mount, Monitor Desk Mount, Desk Mount, Mount
---|---
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- VIVO Steel Dual Monitor Desk Mount – VIVO - desk solutions, screen mounting, and more