Welland FI2019LB-G Smart Body Fat Scale User Manual

Welland FI2019LB-G Smart Body Fat Scale

Product Information

Specifications

• Size: 27.8×27.8×2.7 CM
• Weight: 1.54kg/3.95 lb
• Batteries: 4*1.5 V AAA
• Capacity: 396 Ib / 180 kg
• Division: 0.02lb/0.01kg
• Unit: Ib / kg / st

Product Usage Instructions

Safety Precautions

When using the Smart Body Fat Scale, it is important to follow these safety precautions:

1. The Bluetooth scale should not be used to diagnose or treat any medical condition. Consult a doctor when undertaking any diet or exercise program.
2. If you are pregnant or have a pacemaker or other internal device, do not over-rely on the data provided by this product. All data is for reference and is not a substitute for advice from a licensed healthcare professional.
3. If the scale malfunctions, first check the batteries and replace them if needed.
4. Check the device before each use. Do not use the device if it is damaged. Continuous use of a damaged unit may cause injury or improper results.

Additional Notes

• The scale is a high-precision measuring device. Never jump or stamp on the scale or disassemble it. Handle the scale carefully to avoid breakage.
• Place the scale on a hard, flat surface during use. Using the scale on a soft surface like carpet or linoleum may affect the accuracy of the scale readings.
• To ensure weighing accuracy, gently step on the scale to wake it up and wait at least 10 seconds before weighing. You must also wake up the scale if it has been moved. Take your measurements at the same time each day to ensure the most accurate results.
• When not in use, remove the batteries and place the device in a dry room. Protect it against extreme moisture, heat, lint, dust, and direct sunlight. Never place any heavy objects on the equipment.
• Before using the scale, make sure you have entered all your data through the Fitdays app.
• Use the scale while barefoot. The scale cannot measure body fat percentage if you’re wearing shoes or socks.
• Make sure your feet are dry before weighing yourself.
• This scale is not waterproof; never immerse the scale in water. To clean the surface, use a damp cloth or glass cleaner. Do not use soap or other chemicals.

Operating Instructions

The Smart Body Fat Scale can connect with your mobile phone (Android 6.0+ & iOS 8.0+) or iPad via Bluetooth 4.0. Download the ‘Fitdays’ app for free from the App Store or Google Play.

Bluetooth Scale User Manual

Thank you for choosing Smart Body Scale! This scale is your personal health assistant. It uses bio-electrical impedance analysis (BIA) technology to offer you the data you need to keep track of your health metrics: BMI(Body Mass Index), Body Fat %, Body Water, Muscle Mass, Bone Mass, Protein, and much more! We sincerely hope that you enjoy using your new product.

Caution

Safety precautions

When using a digital scale, certain basic safety precautions must be followed, including the following:

1. The Bluetooth scale should not be used to diagnose or treat any medical condition. You should consult a doctor when undertaking any diet or exercise program.
2. lf you are pregnant or have a pacemaker or other internal device, you should not over-rely on the data provided by this product. All data is for reference and is not a substitute for advice from a licensed healthcare professional.
3. lf the scale malfunctions, first, check the batteries and replace them if needed.
4. Check the device before each use. Do not use the device if damaged. The continuous use of a damaged unit may cause injury or improper results.

Note

1. Scale is a high-precision measuring device. Never jump or stamp on the scale or disassemble. Please handle the scale carefully to avoid breakage.
2. Place the scale on a hard, flat surface during use. Using the scale on a soft surface like carpet or linoleum may affect the accuracy of the scale readings.
3. To ensure weighing accuracy, please gently step on the scale to wake it up and wait at least 10 seconds before weighing it on the scale. You must also wake up the scale if it has been moved. Take your measurements at the same time each day to ensure the most accurate results.
4. When not in use, please remove the batteries place the device in a dry room and protect it against extreme moisture, heat, lint, dust and direct sunlight. Never place any heavy objects on the equipment.
5. Before using the scale, make sure you have entered all your data through the Fitdays app.
6. Use the scale while barefoot. The scale cannot measure body fat percentage if you’re wearing shoes or socks.
7. Make sure your feet are dry before weighing yourself.
8. This scale is not waterproof; never immerse the scale in water.

To clean the surface, use a damp cloth or glass cleaner. Do not use soap or other chemicals.

Specifications

• Size: 27.8×27.8×2.7 CM
• Weight: 1.54kg/3.95 lb
• Batteries: 4*1.5 V AAA
• Capacity: 396 Ib / 180 kg
• Division: 0.02lb/0.01kg
• Unit: Ib / kg / st

Accuracy Range

TFT Screen Display Sequence

Battery and Fault Reminder

• For body weight: Place the scale on an even surface and wait at least 10 seconds before stepping on the scale. The reading should display 0.0 kg before stepping on.

• For body fat and other body composition analysis: Stand straight on the scale and uniformly touch the electrodes with bare and dry feet as shown below.

Operating instructions

• The Bluetooth Scale can connect with your mobile phone (Android 6.0+ & IOS 8.0+) or iPad via Bluetooth 4.0. Download the ‘Fitdays’ app free from the App Store or Google Play.

Download the App and install the batteries

• Download ” Fitdays ” via the App Store or Google Play.
• Register your own ID, then add personal data and confirm OK.
• Install the original battery set. Please note the batteries offered are trial versions. We recommend replacing them within 3 months and removing the batteries when not using for a long time.

Pairing the scale with your smartphone
Turn on Bluetooth on your smartphone. Location also needs to be turned on for Android 6.0 or higher.

• Press [Device] and Device Management to enter the measuring page and find the device.
• Power on the scale, press[+] to select “MY_SCALE” to add the device.
• Come back to the measure page. Step on the scale and keep standing for 5-10 seconds with bare feet. The weighing was finished after the data came out.

View reports deleted data, set reference data, share progress by recent, weekly, month and year

• Click ” Chart ” to view your progress history. Enter it into the calendar to form a list and select the data or all data you want to delete. You can also select different date data to contrast and share with friends via Facebook, Instagram, or SMS by clicking the button.

• At the bottom, you will find a bar where you can select different types of data to display. You can share your fitness data with friends via Facebook, Instagram, or SMS by clicking the share button [+] and Share on the Measuring page.

Add/Delete Users & Basic Settings

• Under ” Mine ” you can add user(s) “ “. To delete an account, swipe the account to the left and select ” Delete “.
• Themes, Set goals, Weight units, Weighing done sounds, Languages, and Passwords can all be set under the Settings” ” page. Please note that you can change the weighing unit under Press the Unit button, then if will control the unit of App.

Sync to fitness app

Apple Health

1. Open the ” Health ” app on your iPhone, and select ‘Data Sources.
2. Select ” Fitdays ” from the sources list.
3. Turn on all categories to allow the Fitdays app to work.

Google Fit

1. Enter the Settings” ” page, select ” Google Fit “
2. Turn on the ” Google Fit ” button, and log in to your Google account.
3. It will now automatically redirect you to the ” Google Fit “page.
4. After the connection has been established, the data ” Weight ” will sync to Google Fit.

Fitbit App

1. Enter Setting “ ” page, select Fitbit
2. Turn on the Fitbit button and log in to your Fitbit account.
3. Select ” Allow ” to access the Fitbit App.
4. After connection, the data (Weight, Body Fat%, BMI) will sync to the Fitbit app. You can view both on the app and the web.

Maintenance

Recalibrating the scale
If the scale has been moved or flipped upside down,
It must be recalibrated to ensure accurate results.

1. Place the scale on a hard, flat surface.
2. Step on the scale with one foot until the digits appear on the display, then, step off.
3. The scale will show “0.00”, indicating that the calibration process is complete.

Frequently Asked Questions&Answers

• Why doesn’t the scale work? Why does the data on the screen disappear in a flash?
• Please check the batteries are installed properly, and replace batteries if necessary.
• The scale cannot connect with the App.
• Check that the phone’s software is iOS 8.0 or higher or Android6.0 or higher.
• Download and open the newest version of the Fitdays App.
• Enable Bluetooth on your phone. For Android 6.0 or higher, location needs to be enabled
• No body fat is measured when weighing.
• Step on with dry and bare feet
• Ensure Bluetooth is enabled and working
• Ensure personal data is entered.

FCC Statement

Operation is subject to the following two conditions

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>