R G FP0276 Front Axle Sliders Instructions

R G FP0276 Front Axle Sliders

Product Information

• Product Name: FP0276 Ducati Diavel V4 2023- Fitting Kit
• Manufacturer: R&G Racing
• Model: FP0276
• Compatibility: Ducati Diavel V4 (2023-)
• Contents:
  • 2 x M8 Washers
  • 1 x M8 Nyloc Nut
  • 1 x Assembly Diagram
  • 2 x M8 Nuts
  • 2 x M8 Bolts
  • 2 x M8 Rubber Washers

Specifications

Fitting Instructions

1. Ensure all parts from the kit are present.
2. Read all instructions carefully before proceeding.
3. If you are unsure about fitting the product, consult one of our dealers or have it fitted by a qualified technician.
4. Note that the way the kit is packed may not necessarily represent the way it should be mounted on the bike.
5. If rubber washers are used to hold components onto bolts, these rubber washers can be thrown away.

Product Usage Instructions
To install the FP0276 Ducati Diavel V4 2023- Fitting Kit, follow the steps below:

Step 1: Preparation
Make sure you have all the necessary tools and equipment:

• Socket wrench set
• Torque wrench
• Screwdriver

Step 2: Positioning
Identify the appropriate mounting location on your Ducati Diavel V4 (2023-) for the fitting kit.

Step 3: Assembly

1. Refer to the assembly diagram provided in the kit to identify the placement of each component.
2. Attach the M8 washers to the designated areas on the bike.
3. Secure the components using the M8 bolts.
4. Tighten the bolts using the specified torque settings for each bolt size (refer to the specifications section).
5. Use the M8 nyloc nut to ensure a secure fit.

Step 4: Verification
Double-check all connections and ensure that the fitting kit is securely mounted to the bike.

FAQ

• Q: Can I use this fitting kit on a different motorcycle model?
  A: No, the FP0276 Ducati Diavel V4 2023- Fitting Kit is specifically designed for the Ducati Diavel V4 (2023-) model and may not be compatible with other motorcycles.

• Q: Do I need any additional tools or accessories to install this fitting kit?
  A: No, all necessary components and hardware are included in the kit. However, you will need basic tools such as a socket wrench set, torque wrench, and screwdriver for installation.

• Q: Can I install this fitting kit myself or should I seek professional assistance?
  A: While it is possible to install the fitting kit yourself, we recommend consulting one of our dealers or having it fitted by a qualified technician to ensure proper installation and avoid any damage to your motorcycle.

INSTRUCTION

THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE. SOME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. PLEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING. IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS OR HAVE FITTED BY A QUALIFIED TECHNICIAN. PLEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF MOUNTING TO THE BIKE. IN THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS, THESE RUBBER WASHERS CAN BE THROWN AWAY.

DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM: WWW.RG- RACING.COM

DESCRIPTION

TOOLS REQUIRED

• 13mm sockets and socket wrench.

GENERAL TORQUE SETTINGS

• M4 BOLT = 8Nm
• M5 BOLT = 12Nm
• M6 BOLT = 15Nm
• M8 BOLT = 20Nm
• M10 BOLT = 40Nm
• M12 BOLT = 40Nm

FITTING INSTRUCTIONS

• Slide the spindle bar (ITEM 4) through the hollow front spindle until the threaded part is visible on both sides.
• Place the spacers (ITEM 2/3) over the spindle bar (ITEM 4) and slot the shoulder of the spacer into the opening.
• Next place the bobbins (ITEM 1) over the spindle bar (ITEM 4) on both sides, ensuring the threaded part is still protruding through the bobbins.
• Secure the bobbins (ITEM 1) with the washers and nuts (ITEM 5&6) on both sides. Tighten with a 13mm socket on both sides. Ensure both sides have an equal amount of thread engagement.

See more R&G products for your Motorcycle in the link below: R&G Racing | All Products for Ducati – Diavel V4 (2023) (rg-racing.com)

CONSUMER NOTICE

The catalogue description and any exhibition of samples are only broad indications of the Products and R&G may make design changes which do not diminish their performance or visual appeal and supplying them in such state shall conform to the order. The Buyer acknowledges no representation or warranty (other than as to title) has been given or will apply to the Products other than those in R&G’s order or confirmation and the Buyer confirms it has chosen the Products as being of merchantable quality and suitable for its particular purposes. Where R&G fits the Products or undertakes other services it shall exercise reasonable skill and care and rectify any fault free of charge unless the workmanship has been disturbed. The Buyer is responsible for ensuring that the warranty on the motorcycle is not affected by the fitting of the Products. On return of any defective Products R&G shall at its option either supply a replacement or refund the purchase money but shall not be liable if the Products have been modified or used or maintained otherwise than in accordance with R&G’s or manufacturer’s instructions and good engineering practice or if the defect arises from accident or neglect. Other than identified above and subject to R&G not limiting its liability for causing death and personal injury, it shall not be liable for indirect or consequential loss and otherwise its liability shall be limited to the amounts paid by the Buyer for the Products or the fitting or service concerned. These terms do not affect the Buyer’s statutory rights.

R &G RACING RETURNS POLICY (NON-FAULTY GOODS)
Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor. Goods must be in re-sellable condition, in the opinion of R&G Racing. All returns are subject to a 25% restocking and handling fee (25% of the gross value exc. P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase. This policy does not affect your statutory rights and does not refer to faulty goods.

R &G Racing
Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007
Fax: +44 (0)1420 87301
www.rg-racing.com
Email: info@rg-racing.com

References

• RACING.COM - YOUR RACING CONNECTION
• Welcome to R&G | Setting the standard in bolt-on motorcycle accessories and Crash Protectors
• Welcome to R&G | Setting the standard in bolt-on motorcycle accessories and Crash Protectors

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>