OtterBox Wireless Charger Dash & Windshield Mount 2.0 for MagSafe Instructions

OtterBox Wireless Charger Dash & Windshield Mount 2.0 for MagSafe

Specifications

• Mount Type: Dash + Windshield
• Compatibility: Magsafe
• Installation: Suction cup or permanent adhesive dash mounting disk

Setup | Installation

1. Loosen the nut and snap the ball into the charger mount.

2. Peel off the adhesive backing. (Note: The suction cup adhesive is removable for easy repositioning.)

3. Place the mount in the desired position and push the lever to lock the suction cup. It is recommended to mount on flat surfaces.

4. If the mount does not adhere securely to the surface, use the included permanent adhesive dash mounting disk for a more secure hold.

5. Ensure that the mount does not block the field of vision, impede vehicle operation, or mount in airbag deployment locations.
   Refer to local laws and ordinances for allowable mounting locations.

6. Use the cable wrap to arrange the cable neatly out of the way.

Wireless Charger Car Mount for Dash + Windshield for Magsafe | Use

Instructions

1. Set out the mount, cable and car charger.

2. Clean surface with alcohol wipe

3. Loosen nut and snap ball into charger mount..

4. Peel adhesive backing.
   Suction cup adhesive is removable for easy repositioning.
   Place mount in desired position† and push lever to lock suction cup (flat surfaces recommended).
   If the mount does not adhere securely to the surface, use the included

5. permanent adhesive dash mounting disk on the desired surface for a more secure hold.
   Do not block field of vision, impede vehicle operation, or mount in airbag deployment locations. Consult your local laws and ordinances for allowable mounting locations.

6. Adjust angle and tighten nut to secure.

7. Connect cable to mount and to car charger.

8. Use cable wrap to arrange cable neatly out of the way.

USE | UTILISATION

1. Align phone with oval and click onto mount.

2. Loosen nut to change angle and tighten nut to secure.

3. Mount holds phone securely while charging and using.
   

4. Remove phone from mount with a twist motion from the bottom.

REMOVE MOUNT

1. Unplug cable from mount and car charger.

2. Press lever and pull mount off surface.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>