citronic 154.070UK 40W COB LED RGBW PAR Light User Manual

citronic 154.070UK 40W COB LED RGBW PAR Light User Manual

Please read through this manual thoroughly before use, any damage Caused by misuse of product will not be covered by warranty.

Stylish and sturdy, this Retro-style hexagonal PAR light is fitted with a bright 40W RGBW COB LED that produces an array of 15 eye-popping colours. The unit can be controlled by auto, sound-to-light, master/slave programs or via 5/7/9 channel DMX for more precise control.

In the box:

Your HexaPAR should arrive with you in a single carton in good condition. The carton should contain 1 x main unit, 1x Dual mounting bracket and thumbscrews, 1 x UK IEC mains lead and 1 x user guide.

Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.

Please do not open cover, contains high voltage. This product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.

Placement:

• Keep away from damp or dusty environments.
• Ensure adequate airflow around the fixture housings.
• Ensure adequate access to controls and connections.

Cleaning:

• Use a soft cloth with a neutral detergent to clean the casing as required.
• Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups.
• Do not use strong solvents for cleaning the unit.

Side panel controls:

1. LCD display
2. Manual control buttons
3. Earth screw (do not remove)
4. IEC power input
5. IEC power output
6. DMX output
7. DMX input
8. Microphone

Manual control menu:

Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN” buttons to navigate through various setting functions.
Press “ENTER” button to save the desired setting.

DMX mode:
The HexaPAR can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select Addr from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER” to confirm.

This unit has 4, 6 or 8 DMX channels as indicated in the table below:

fast), 132-139 LED on, 140-181 Castoff slow on (slow to fast), 182- 189 LED on, 190-231 Fast on slow off (slow to fast), 232-239 LED on, 240-247 Lightning strobe, 248-255 LED on| 0-007 LED on, 008-015 LED off,016-131 Strobe (slow to fast), 132-139 LED on, 140-181 Castoff slow on (slow to fast), 182- 189 LED on, 190-231 Fast on slow off (slow to fast), 232-239 LED on, 240-247 Lightning strobe, 248-255 LED on
CH3| 1-255 Green dimmer| 1-255 Red dimmer| 1-255 Red dimmer
CH4| 1-255 Blue dimmer| 1-255 Green dimmer| 1-255 Green dimmer
CH5| 1-255 White dimmer| 1-255 Blue dimmer| 1-255 Blue dimmer
CH6| | 1-255 White dimmer| 1-255 White dimmer
CH7| | 0-050 Linear dimmer, 051-101 Exponential curve dimmer, 102- 152 Logarithmic curve dimmer, 153-204 S-Curve dimmer, 205-255 Halogen effect dimmer| 0-005 No function, 006-125 Colour select 1-15, 126-128 Colour stop, 129-192 Colour jump (slow to fast), 193-255 Colour fade slow to fast
CH8| | | 0-005 Sound control off, 006-255 Sound sensitivity (low to high)
CH9| | | 0-050 Linear dimmer, 051-101 Exponential curve dimmer, 102- 152 Logarithmic curve dimmer, 153-204 S-Curve dimmer, 205-255 Halogen effect dimmer

Specifications:

Troubleshooting

No power (mains)| Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
---|---
Check the unit is charged and the power switch is in the On position
No light output| Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX| Check that unit is in DMX mode and ensure DMX address remains lit to confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/cutting out| Ensure adequate ventilation and unit is not too close to a heat source

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.
Copyright© 2024 AVSL Group Ltd, Unit 2 Bridge water Park, Taylor Road, Tr afford Park, Manchester. M41 7JQ.

VSL (Europe) Ltd, Unit 3D North Point House, Taylor Road, Tr afford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.

154.070UK User Manual
www.avsl.com

References

• AVSL
• AVSL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>