EKVIP 022513 Light Tree Instruction Manual
- June 3, 2024
- EKVIP
Table of Contents
EKVIP 022513 Light Tree Instruction Manual
LIGHT TREE
OPERATING INSTRUCTIONS
Original instructions
Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website.
© JULA AB 2022-04-22
JULA AB
BOX 363, 532 24 SKARA, SWEDEN
SAFETY INSTRUCTIONS
Read the user instructions carefully before use!
Save these instructions for future reference.
- Check that no light sources are damaged.
- Do not connect the product to the mains power supply while the product is still in the pack.
- For indoor and outdoor use.
- Do not connect two or more strings of lights together electrically.
- The bulbs are not replaceable and the string of lights cannot be repaired.
- The external power cord cannot be replaced – if the cord, plug or any other part is damaged the whole product must be replaced.
- Do not use sharp or abrasive objects during assembly.
- Do not expose the cord or conductors to mechanical loads. Do not hang objects on the string of lights.
- This is not a toy. Exercise care if the product is used near children.
- Unplug the power cord when the product is not in use.
- The product is made of recyclable material. Recycle products that have reached the end of their useful life according to local regulations.
- This string of lights must only be used together with a transformer with the same output as the one supplied and must never be connected directly to the mains supply without a transformer.
- Do not use as general lighting.
SYMBOLS
TECHNICAL DATA
ASSEMBLY
- Fit the branches (A) on the tress and tighten the screws (B).
- Insert the connections with the branches (C) and tighten the plastic nuts on the connections.
- Fit the base (D) and tighten the screw (E).
- Arrange the branches (F).
- Connect the cable to the transformer (G) and tighten the connection’s plastic nut.
- In order for the tree to stand stably it should be fixed using the four enclosed fastening pins.ra medföljande fästpinnarna.
FIG. 1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>