Giantex B084DLH6JF Foot Spa Bath Massager User Guide

B084DLH6JF Foot Spa Bath Massager
User Guide

DIAGRAM

POWER: 120V/60 Hz, 500 watts

REMOVABLE MASSAGE SURFACE

• Use the latches to remove/ insert the massage surface
• Place medicine or herbs in the medicine compartment to customize your foot batn massage

CONTROL PANEL FUNCTIONS

Power: Press to turn machine on and off. When turned on, the machine will automatically begin to heat the water. The power and heat indicator lights will turn on.
Temp + / – : Press to increase/decrease temperature at one-degree increments.
Red Light: Press to toggle the red light on and off.
Massage: Press to toggle the massage function on and off.
Shower: Press to toggle the shower function on and off. Use this to test water temperature.
Timer: Press to show the current time. Continue pressing to set the timer anywhere from 10 minutes to 60 minutes.

OPERATING INSTRUCTIONS

1. Place machine on level surface. Ensure that the massager is unplugged before filling with water.
2. Add clean water directly to the basin. Make sure you do not go beyond the max water line.
3. Plug the machine in and turn it on. Set the water temperature and wait until the water reaches your desired temperature. Use the snower function to test the water temperature.
4. Sit down ona chair or a similar sturdy surface and place your feet in the basin.
5. Select your foot bath or massage settings.

FOOT SPA MASSANGER TIPS

• The massager is designed for intermittent use. Only use the massaging function at 15 minute increments, then the motor must be allowed to cool.
• Regular foot baths and massages will greatly improve blood circulation.
• Use the shower function to test the temperature of the water before putting your feet in the bath.
• Be aware that during a foot bath massage your pores will open, so do not use while sitting directly in front of a fan or air conditioner to avoid getting a cold.
• It is recommended that you drink a cup of water before use.
• It is recommended to use this product one hour before or after a meal.
• Do not stand up immediately after a foot bath massage; rest 2 to 3 minutes before standing up and walking.

CLEANING AND STORAGE

• Remove water by draining water through the external drain pipe or carefully pouring it from the basin.
• Prevent water from splashing on the control panel or it may damage the components.
• Turn the machine off and unplug it after every use.
• Wipe clean accumulated dirt from the inside of the basin.
• Use the latches to remove the massage surface to clean it.
• Only clean this product with soap and water. Do not use abrasive chemicals as it may damage the machine.
• Do not store this product upside down or by hanging.
• Store upright in a cool and ventilated place.

TROUBLESHOOTING

vinegar for 10 minutes
Heat not working| No power| Make sure the machine is properly plugged in and turned on
Not working or stopped working| Not turned on| Turn on
Foot bath time is up| Add time or restart foot bath

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>