TOOLCRAFT 2899813 USB-C Rechargeable LED Work Light Instruction Manual

June 16, 2024
Toolcraft

TOOLCRAFT 2899813 USB-C Rechargeable LED Work Light

Specifications

  • Product number: 2899813
  • Protection class: III
  • LED type: XPE
  • Rechargeable battery: Built-in, non-replaceable Li-ion battery

Product Usage Instructions

Intended Use
This product is designed for a specific purpose. Read and follow the instructions carefully to ensure safe and proper usage.

Operating Instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR code provided. Follow the instructions on the website.

Safety Instructions
It is important to read and adhere to the safety instructions to prevent personal injury or damage to property. Failure to do so may void the warranty/guarantee.

General

  • The product is not a toy and should be kept out of the reach of children and pets.
  • Do not leave packaging material lying around carelessly as it may become dangerous playing material for children.
  • If you have unanswered questions, contact our technical support service or other technical personnel.
  • Maintenance, modifications, and repairs should only be performed by a technician or authorized repair center.

Handling
Handle the product with care to prevent damage. Even a low-height fall or impact can result in damage.

Operating Environment

  • Avoid subjecting the product to mechanical stress.
  • Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, solvents, and direct sunlight.

Operation
If unsure about the operation, safety, or connection of the product, consult an expert. If the product can no longer be operated safely, take it out of operation and protect it from accidental use. Do not attempt to repair the product yourself.

Li-ion Battery

  • The rechargeable battery is permanently built into the product and cannot be replaced.
  • Avoid damaging the rechargeable battery as it may cause an explosion or fire.
  • Never short-circuit the battery contacts or throw the battery or product into fire, as it may result in fire or explosion.
  • Regularly charge the rechargeable battery, even if not using the product. Discharging before charging is not necessary.
  • Never charge the rechargeable battery unattended and place the product on a non-heat-sensitive surface during charging.

FAQ

Q: Can I replace the rechargeable battery?
A: No, the rechargeable battery is built-in and cannot be replaced.

Q: Where can I download the latest operating instructions?
A: You can download the latest operating instructions from www.conrad.com/downloads or scan the provided QR code.

Q: Can I attempt to repair the product myself?
A: No, for safety reasons, repairs should only be performed by a technician or authorized repair center.

Intended use

The product is a USB-C® rechargeable LED work light with a magnetic clip and base. The product has three light sources including a UV light. Notes:

  • The product has an IP43 ingress protection rating.
  • The product can resist water splashing against the enclosure from any direction.
  • Do not submerge!

If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved. USB4, USB Type-C, and USB-C are registered trademarks of USB Implementers Forum.

Delivery contents

  • Product
  • USB-A to USB-C® charging cable
  • Operating instructions

Operating instructions

Download the latest operating instructions from www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The symbol warns of hazards that can lead to personal injury. This product is constructed according to protection class III. Read the operating instructions carefully.

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

  • The product is not a toy. Keep it out of the reach of children and pets.
  • Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
  • If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
  • Maintenance, modifications, and repairs must only be completed by a technician or an authorized repair center.

Handling

  • Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

  • Do not place the product under any mechanical stress.
  • Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
  • Protect the product from direct sunlight.

Operation

  • Consult an expert when in doubt about the operation, safety, or connection of the product.
  • If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
    • is visibly damaged,
    • is no longer working properly,
    • has been stored for extended periods in poor ambient conditions or
    • has been subjected to serious transport-related stresses.

Li-ion battery

  • The rechargeable battery is permanently built into the product and cannot be replaced.
  • Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an explosion or a fire!
  • Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire. There is a danger of fire and explosion!
  • Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable battery technology being used, you do not need to discharge the rechargeable battery first.
  • Never leave the rechargeable battery of the product unattended.
  • When charging, place the product on a surface that is not heat-sensitive. It is normal thata certain amount of heat is generated during charging.

LED / UV light

  • Do not look directly into the LED / UV light!
  • Do not look into the beam directly or with optical instruments!
  • Avoid exposing your skin to UV light for extended periods of time.

Top light (LED type: XPE)

  • Do not look directly into the LED light!
  • Do not look into the beam directly or with optical instruments!

Risk Group 2
CAUTION Possibly hazardous optical radiation is emitted from this product The scope of delivery includes LED notice signs in different languages. If the notice sign on the product is not in your local language, attach the corresponding sign to your device.

Recharge the battery

Important
For effective protection against ingress, make sure the charging port cover is properly sealed.

  • Open the charging port cover.
  • Connect one end of the charging cable to the charging input on the product.
  • Connect the other end to a suitable power adaptor.

LED status indicator

Operation

Press the power button repeatedly to toggle through modes: Top light (ON) → side light (high) → side light (low) → UV light ON → OFF

LED status Description

 Cleaning

Important

  • Do not use aggressive cleaning agents, rubbing alcohol, or other chemical solutions. They damage the housing and can cause the product to malfunction.
  • Do not immerse the product in water.
  1. Switch the product off.
  2. Let the product cool down to ambient temperature.
  3. Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point. Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):

  • in our Conrad offices
  • at the Conrad collection points
  • at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
    End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

  • Charging input ………………………….. 5 V/DC 1 A via USB-C®
  • Rechargeable battery ………………… 1x 3.7 V 1200 mAh Li-ion (non-removable)
  • Recharge time ………………………….. 4 -5 hrs
  • Protection class ………………………… III
  • Ingress protection……………………… IP43
  • Material …………………………………… Aluminium + plastic
  • Top light…………………………………… LED type: XPE
  • Brightness (±15 %): 70 lm
  • Colour temperature (±15 %): 8,500 K
  • Sidelight………………………………….. LED type: COB
  • Brightness (±15 %): 120 lm (low), 200 lm (high)
  • Colour temperature (±15 %): 6,000 K
  • UV light……………………………………. LED type: 2x SMD
  • Wavelength: 395 – 400 nm
  • Battery protection ……………………… Over-heat, short circuit
  • Operating/storage temperature …… -10 to +40 °C
  • Dimensions (W x H x D) …………….. 112 x 31 x 27 mm
  • Weight …………………………………….. 100 g

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *2899813_V3_0124_dh_mh_en 18014399527408779-2 I3/O3 en

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Toolcraft User Manuals

Related Manuals