auna Line 200A Floor Standing Speaker Instruction Manual

auna Line 200A Floor Standing Speaker Instruction

Product Information

Specifications

• Item number: 10036137
• Power supply: 100-240 V~ 50/60 Hz
• Output power: 80 W x 2
• Drivers: (8 + 4 +1) x 2
• Frequency range: 40 Hz – 20 kHz
• S/N ratio: 75 dB
• Connectors and connectivity: RCA, 6.35-mm microphone jack, digital optical output, BT

Product Usage Instructions

System Connection Diagram
Connect the AC power cord to the unit.

Unit Controls
Front panel

• ST.BY: Standby function by pressing 3 sees in AUX/USB/SD mode.
• INPUT: Input function key.
• VOL-: Turn down the volume.
• VOL+: Turn up the volume.
• MENU: Menu function key.
• U DISK: USB slot.
• SD /MMC CARD: SD/MMC card slot.
• MIC: MIC Slot.

Remote control

• INPUT
• EQ
• DISP
• MUTE
• MIC
• VOL+/SLEEP
• -/+ SW
• -/+ TRE
• -/+ SD /MMC CARD
• VOL-/+ 0-9
• REPEAT
• RESET

How to use BT
To use BT, follow these steps:

1. Turn on the unit.
2. Enable Bluetooth on your device.
3. Search for available Bluetooth devices. Select the device named “Linie 200A AktAivcetEirnvePcAeAlPti-AAnaLlvtatSeooupzdptes1eaP0aprA0skrlaeoe3ancnr6chtot1eei3var7PocAtiavettivo” from the list.
4. If prompted for a password, enter “0000”.
5. Once connected, you can stream audio wirelessly to the unit.

FAQ

• Q: How do I connect the unit to a device?
  A: You can connect the unit to a device using the RCA, 6.35-mm microphone jack, digital optical output, or BT connection.

• Q: What is the power supply requirement for the unit?
  A: The unit requires a power supply of 100-240 V~ 50/60 Hz.

• Q: How do I adjust the volume?
  A: You can adjust the volume using the VOL- and VOL+ buttons on the unit or the corresponding buttons on the remote control.

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints to avoid damage. Any failure caused by ignoring the items and cautions mentioned in the instruction manual are not covered by our warranty and any liability. Scan the QR code to get access to the latest user manual and other information about the product.

TECHNICAL DATA

output, BT

WARNING

****| Triangle with lightning plus an explanation as follows:

DANGEROUS VOLTAGE: The lightning flash with the arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

---|---
****| Triangle with exclamation point plus explanation as follows: ATTENTION: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product.

SAFETY INSTRUCTIONS

General instructions

• Lightning – If you are not going to use the unit for a longer period of time or if there is a thunderstorm, pull the plug out of the socket or disconnect the unit from the antenna connection. This will prevent damage to the unit due to lightning and overvoltage.

• Overload – Do not overload sockets, extension cords or integral sockets as this may result in a fire or electric shock.

• Foreign objects and liquid ingress – Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquids of any kind on the unit.

• Repair and maintenance – Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltages or other hazards. Refer all servicing to qualified service personnel..

• Damage requiring service – Unplug the appliance from the mains and refer servicing to qualified service personnel if any of the following occurs:
  (a) If the power cord or plug is damaged.
  (b) If liquid has been spilled or objects have fallen on the unit.
  (c) If the unit has been exposed to rain or water.
  (d) If the unit has been dropped or damaged.
  (e) If the performance of the unit is significantly reduced.

• Spare parts – If spare parts are required, ensure that the specialist company replacing the parts only uses spare parts that are approved by the manufacturer or have the same characteristics as the original part. Unauthorised replacement may result in fire, electric shock or other hazards.

• Heat – Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers).

Special notes on operation

• Children from the age of 8, mentally, sensory and physically impaired persons may only use the appliance if they have been familiarised in detail with the functions and safety precautions by a supervisor responsible for them beforehand and understand the risks involved.
• Before use, check that the mains cable is undamaged. If the mains cable or plug are damaged, they must be replaced by the manufacturer, an authorised specialist company or a similarly qualified person. Children should be supervised to ensure that they do not play with the appliance. Make sure that children and babies do not play with plastic bags or other packaging materials.
• Make sure that the mains plug/mains adapter always remains easily accessible so that the appliance can be quickly disconnected from the mains in an emergency.
• When you are no longer using the appliance, switch it off and unplug it from the mains.

SCOPE OF SUPPLY

• Tower speaker  2 x
• Remote control 1 x
• Stereo to RCA cable 1 x
• User manual 1 x
• Optical cable 1 x

SYSTEM CONNECTION DIAGRAM

Notes

• Insert the plugs fully into jacks. Loose connections may produce a humming sound or other noise interference.
• Connect the speakers and all other external sources and finally connect the AC power cord.

UNIT CONTROLS

Front panel

Remote control

****| POWER switch button switch

On or off for standby..

---|---
INPUT| To select the Input source
EQ| Equalizer options
DISP| LED+ display brightness adjustment
MUTE| Mute the audio
MIC VOL+/-| Turn up the volume
SLEEP -/+| Set up the sleep time
| Play & pause when USB/SD Input
| Previous track in USB/SD mode
| Rewind
| Next track in USB/SD mode
| Fast forward
SW-/+| Turn up or turn down the bass volume
TRE -/+| Turn up or turn down the treble volume
SD /MMC CARD| SD/MMC card slot
VOL-/+| Turn up or turn down the master volume
0-9| Press any key to choose the track
REPEAT| It will repeat playing the selected track if pressed once.

It will repeat playing all the tracks if pressed twice.

RESET| Reset to the default setting

UTILITY DESCRIPTION

1. Connect the one end of the right tower cable to the right output port on the back panel of the left tower.
2. Make sure all the cables above are connected correctly, then connect the power cord to AC power.
3. Switch on the power, and the red LED display shows (—–). then press the power button either on the remote or the left speaker front panel.

HOW TO USE BT

1. Select the audio input to BT mode
2. Search BT device with the name “Linie 220A”
3. Connect the BT.
4. If your BT device is below the 2.0 version, input the password “0000” when connecting.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it per the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Berlin Brands Group UK Limited
PO Box 42
272 Kensington High Street
London, W8 6ND
United Kingdom
Hereby, Chal-Tec GmbH declares that the radio equipment type Linie 200A complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: use. berlin/10036137
For Great Britain: Hereby, Chal-Tec GmbH declares that the radio equipment type Linie 200A complies with the relevant statutory requirements. The full text of the declaration of conformity is available at the following internet address: use. berlin/10036137

References

• Take-e-way GmbH | take-e-back | Elektroschrott Rücknahmesystem Onlinehandel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>