V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer Instruction Manual

: June 16, 2024
: V I V O

Table of Contents

We’re Here for You
Package Contents
ASSEMBLY STEPS
OPTIONAL: Screw Mount
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Clamp-On 60” Cable
Management Desk Organizer
SKU: DESK-SKIRT-60-P
Instruction Manual

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk
Organizer

Assembly Video & Product Info
www.vivo-us.com/products/desk-skirt-60-p

https://vivo-us.com/products/desk-skirt-60-p

CAUTION!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

We’re Here for You

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| Give us a Call:
309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| Chat Us:
www.vivo-us.com| AVG. RESOLUTION TIME (within office hrs): < 15 M
| Email Us:
help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

Package Contents

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
Package

Included Hardware

Tools Needed:

ASSEMBLY STEPS

STEP 1
Connect the centers of the T Joiners (C) to the ends of the Middle Bars (G).

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
ASSEMBLY

Connect the Upper/Lower Bars ( F ) to the sides of the T Joiners ( C ), then connect the Joiners ( H ) and Side Bars ( B ) to the sides to complete the frame assembly. Lighty tap each joint against a hard surface to ensure all bars and joiners are full pressed in.

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
ASSEMBLY 2

[ CLOSE UP VIEW OF HALF OF ASSEMBLY ]
Note: Ensure all bars and joiners are fully pressed in for a secure fit

STEP 2
Open the flap and straps of the Panel ( A ) and insert the frame, making sure the frame is fully inserted and the material is tightly stretched around it.
Note: Confirm that frame pieces are fully secure into each other before sliding into panel.

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
sliding

Snug Fit:
Fabric on Panel has a tight fit around the frame and may need to be stretched before inserting the frame.
Fasten Straps ( A1 ) on inside of Panel ( A ) to secure the frame.

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
Straps

STEP 3
Place the plastic Mounting Clips ( D ) in the center of each exposed portion of the steel bars.
NOTE: Make sure the wire management flap on the Panel ( A ) is facing the inside of the desktop.

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
Mounting

< 1.5”/40mm Desktops
For thinner desktops ( <1.5”/40mm), adjust Clamp ( D ) by disassembling, flipping the bottom bracket, and reassembling using a Phillips screwdriver.

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
screwdriver

STEP 4
Secure Mounting Clips ( E ) to Clamp ( D ) in one of four mounting locations using 3/4”Screws ( S-A ).

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
mounting 2

STEP 5
Mount the assembled panel to the desktop and tighten Clamps ( D ) to secure the assembly in place.

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
Clamps

Route and organize the cables and secure them using the flap on the panel ( A ).

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
panel

OPTIONAL: Screw Mount

If you need to convert you desk skirt into a screw mount, please use the following instructions for how to use the screw mount method.

STEP 1
Follow original steps 1-3 and proceed.
Center the assembled panel under the desktop and use a pencil to mark the locations of Plastic Mounting Clips ( D ).
NOTE: Desktop must be at least 1” thick to prevent screws from poking out through the top and damaging the surface.

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
surface

STEP 2
Drill pilot holes using a 1/8” (3mm) bit. Mount the assembled panel to the underside of the desk using 3/4” Screws ( W-A ) as shown into Plastic Mounting Clips ( D ).

V I V O DESK-SKIRT-60-P Clamp-On 60 Inch Cable Management Desk Organizer -
Mounting 3