TESLA CB500 Smart Camera User Manual

TESLA CB500 Smart Camera

Product Information

Specifications:

• Speaker
• Status light
• Microphone
• Lens
• Light sensor
• LED light
• PIR Reset
• USB-C Charging indicator
• Power button
• SD card slot
• Power port
• Battery capacity

Product Usage Instructions

Installation

Bracket (A) Installation:

1. Fix the bracket on the wall with screws.
2. Bring the camera closer to the bracket.

Bracket (B) Installation:

1. Fix the bracket on the wall.
2. Install the camera in the bracket and lock it with the screw.

Connect

To connect the Tesla Smart Camera to your smartphone:

1. Download the Tesla Smart App from the App Store or Android Market.
2. Open the app and register with a valid mobile number or email address.
3. Input the verification code received and log in to the app.
4. In the app, click on “Create family” and customize the family name and related settings.
5. Select “Smart Camera” under “Security & Sensor” and choose “Add Device” or “+”.
6. Follow the on-screen instructions to input your WiFi’s password and scan the QR code with the camera.
7. Ensure that your router, mobile, and camera are as close as possible during the connection process.
8. Once the camera is successfully added, you can customize its name.

Settings

In the “Smart Camera” interface of the Tesla Smart App, you can set the camera’s common functions.

FAQ

Q: The device cannot be previewed properly?

A: Check whether the network is normal, place the camera close to the router, and if not, reset the device and add it again.

Q: Why is it still in the list of devices after resetting?

A: The reset device only resets the network configuration of the camera. To remove it from the list, delete it using the App.

Q: How to cut the camera network to another router?

A: First remove and reset the device on the App, then configure the device again using the App.

Q: Why doesn’t the device identify the SD card?

A: It is recommended to plug in the SD card after power cut.Confirm that the SD card is available and formatted as FAT32. Also, note that the TF card may not be identified in a poor internet environment.

Q: Why can’t I get notifications with my cell phone App?

A: Please confirm that the App is running on your phone and that the relevant reminder function is enabled. Also, ensure that message notification and authority confirmation in the mobile phone system are opened.

IN THE BOX

• Tesla Smart Camera Battery CB500
• Power adapter
• USB-C cable
• Screws (2 packages)
• Bracket A
• Bracket B
• User manual

INSTALL

1. Bracket (A) Installation

1. Fix the bracket on the wall with screws.
2. Bring the camera closer to the bracket.

2. Bracket (B) Installation

1. Fix the bracket on the wall.
2. Install the camera in the bracket and lock it with the screw.

CONNECT

Download
Tesla Smart is available for both iOS and Android OS. Search the name ‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to download the App.

SET UP ROUTER
The router supports the 2.4GHz WiFi (doesn‘t support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi.

REGISTRATION PROCESS
Step 1 Open the Tesla Smart App, click „Register“, read the „Privacy Policy“ and click „Agree“ .
Step 2 Input a legal and valid Mobile number or Email address and click „Continue“. Input Verification Code, then log in the app.

QR CODE CONFIGURATION

1. Open the Tesla Smart App, click „Create family“, and you can custo-mize the Family name and related settings.

2. Continue to click „Security & Sensor“ >> „Smart Camera“, and then choose“ Add Device“ or „+“, ready to add camera.

3. In „Add Device“ this interface,continue to click „next step“, and then you should input your WiFi‘s passwords.
   Note:

4. Camera only supports 2.4GHz WiFi network. 2) The number of bits in the ssid and passwords of the router should not exceed 24 digits.

5. In this interface, you should scan the QR code in your phone with the camera, when the camera comes out „dong dong dong“. And you can complete the configuration about 30s.

6. When connecting, you should make sure your router, mobile,and camera are as close as possible. When camera added successffully, click „ „ you could also DIY the camera‘s name.

SETTINGS

In „Smart Camera“ interface,click „ „,you can set the camera common functions.

FAQ

• Q: The device cannot be previewed properly?
  A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.

• Q: Why is it still in the list of devices after reseting?
  A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.

• Q: How to cut the camera network to another router?
  A: First remove and reset the device on the App and then configure the device again by the App.

• Q: Why doesn‘t the device identify the SD card?
  A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.

• Q: Why I can’t get the notifications with my cell phone App?
  A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.

FUNCTIONS

• Remote wake-up
  The camera will be in a sleep mode to save power; you can have a preview in App.

• Full-duplex audio
  You can see and hear the vistor in your App from the camera. PIR
  When the camera detects someone stopping by, it sends an alarm message to your cell phone.

• Low battery alarm
  When the battery power is lower than your set, the App will send a notification to your mobile phone.

• Record
  Powerful night vision means no interruptions, even in complete darkness.

• Day & Night
  Using SD card or opening the Cloud-Storage Service, to keep recording for every moment.

TECHNICAL SPECIFICATION

INFORMATION ABOUT DISPOSAL AND RECYCLING

This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regu-lations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.

EU DECLARATION OF CONFORMITY

Hereby, Tesla Global Limited declares that the radio equipment type TSL-CAM- CB500 is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address: tsl.sh/doc

• Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
• Frequency band: 2.400 – 2.4835 GHz
• Max. radio-frequency power (EIRP): < 20 dBm

Manufacturer
Tesla Global Limited
Far East Consortium Building, 121 Des Voeux Road Central Hong Kong
www.teslasmart.com

References

• Sign in to your account
• TESLA | Smart home in your hands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>