Kruger Matz KM0780 Gaming Mouse Owner’s Manual
- June 4, 2024
- Kruger Matz
Table of Contents
Kruger Matz KM0780 Gaming Mouse
SAFETY INSTRUCTIONS
Read this instruction manual and keep it for future reference. The producer does not take responsibility for damages caused by inappropriate handling and use of the product.
- Protect this device from extreme temperatures, sources of heat, and direct sunlight. Do not expose the device to water or humidity nor install it near strong magnetic field. Do not handle this device with wet hands.
- Disconnect from the power outlet if the device is not going to be used for a long time.
- Do not use this device if it has been damaged.
- Place the device on flat, stable surface.
- Prevent the device from falling on the ground or being strongly impacted.
- The producer does not claim liability for any damage caused by inappropriate use and handling or any mechanical damage.
- The producer does not guarantee compatibility with every external device.
- This product is not a toy; keep it beyond children’s reach.
- Do not disassemble or repair this device yourself. The device has no user-serviceable parts inside. In case of damage, contact an authorized service point for a check-up or repair.
- Always disconnect the product from the power source before cleaning. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
PRODUCT DESCRIPTION
- Right button
- DPI button
- Lighting change button
- Scroll wheel
- USB cable
- Left button
- Forward button
- Backward button
INSTALLATION
- Connect the USB plug of the mouse to the available, compatible USB port on the computer.
- The operating system will automatically detect the mouse and install proper drivers.
- The mouse is ready to use.
CLEANING
Always disconnect the product from the power source before cleaning. Clean the device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
TECHNICAL PARAMETERS
- Precision: 800/1600/2400/3200/4800/6400 dpi
- Sensor: optical
- Sensor model: Sunplus 199
- Acceleration: 12 G
- Polling rate: 125 Hz
- Buttons: 7
- Scroll wheel: scroll + button
- Wheel and logo backlight: adjustable, 7 modes
- DPI switch: 6 modes
- Stroke life: up to 5 million times
- Pad life: 80 km
- Lift-off distance: 7 mm +/- 0,2 mm
- Skid pads: plastic
- Material: ABS + textured rubber
- Power supply: via USB (5 V, 100 mA)
Communication
- Connection type: wired
- Interface: USB 2.0
- Supported OS: Windows 7 / Windows 8 / Windows 8.1 / Windows 10 /Mac
Physical parameters
- Hand orientation: right hand
- Braided cable: yes
- Cable length: 1,5 m
- Weight with cable: 130 g
- Dimensions: 125 x 66 x 40 mm
LEARN MORE
For more information on this device visit:
www.krugermatz.com. Read the owner’s manual
carefully before using it. Visit
www.krugermatz.com website for more products and
accessories. In case of any doubts or questions reach out to our Frequently
Asked Questions section.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne. www.krugermatz.com. Kruger Matz is a registered trademark.