GUANGDONG RL-WD01 Wi-Fi Window Door Sensor User Manual

GUANGDONG RL-WD01 Wi-Fi Window Door Sensor

Product Information

Specifications

• Product Name: Wi-Fi Window/Door Sensor
• Model: RL-WD01

Installation

1. Install AAA alkaline batteries.
2. Paste the 3M sticker (included) onto the back of the main unit.
3. Attach the main unit to the door, ensuring that the magnet is aligned with the main unit.

Operating Instructions

A. Downloading the APP

Download the APP to your smartmobile phone using one of the following methods:

1. On your mobile phone, go to the App Store or Google Play. Search for TuyaSmart and download it.
2. Scan the QR code below to download.

Version: 1.1

B. Adding the Device

1. Place the main unit next to the home router (2.4G WiFi) and ensure batteries are installed. Press and hold the button on the unit for 5 seconds until the indicator light flashes red rapidly, indicating that the unit is in WiFi Configuration status.
2. Connect your mobile phone and the device to the same WiFi network. Launch the TuyaSmart app.
3. It is recommended to enable the Bluetooth function on your mobile phone before launching the app for easier device detection.

NOTE: If the device is not detected, follow the instructions below to add it manually.

Two Methods of Adding the Device

a. Auto Scan

1. Enable the Bluetooth function on your mobile phone.
2. Ensure that the device is in a WiFi Configuration state.
3. On the app’s home page, tap the “+” icon at the upper right corner and then tap “Auto Scan…”

b. Add Manually

1. Ensure that the device is in a WiFi Configuration state.
2. On the app’s home page, tap the “+” icon at the upper right corner and then tap “Add Manually”.
3. Select product type: Sensors > Contact Sensor (Wi-Fi).

Enter the WiFi account and password. Select the network configuration method (EZ mode or AP mode) according to the indicator light.

NOTE: The step-by-step instructions on the app may slightly vary due to app updates. Please follow the actual instructions on the app when adding the device.

C. APP FAQ

1. The APP cannot find a new device when adding the device.
   • Check if the network you connected to is 2.4G WiFi.
   • Verify that the WiFi password you entered is correct.
   • If the above operations are correct, reset the device and add it again.
2. Device Reset
   • a. EZ mode: In the standby state, press and hold the Reset button for more than 5 seconds. The indicator light will flash rapidly, indicating that the network has been reset and the device is entering EZ mode.
   • b. AP mode: Under EZ mode, press and hold the Reset button again for more than 5 seconds. The indicator light will flash slowly, indicating that you have switched to AP mode.
   • Pressing and holding the Reset button again for more than 5 seconds will return to EZ mode.

D. Description of Functions

1. How Does It Work: When the magnet is separated from or reattached to the main unit, the unit will turn on the green indicator light and push an alert to your mobile phone through Wi-Fi.
2. Low Battery Indicator: When the battery voltage level is low
   • NOTE: Alkaline batteries are recommended. The product is for indoor use only. Do not install outside.

Package Contents

Installation

1. Install AAA alkaline batteries.
2. Paste the 3M sticker (included) onto the back of the main unit.
3. Attach the main unit to the door. Make sure the magnet is aligned with the main unit.

NOTE:

• Alkaline batteries are recommended.
• The product is for indoor use only. Do not install outside.

Operating Instructions

A. Downloading the APP

• Download the APP to your smartmobile phone by one of the following methods:

1. On your mobile phone go to the App Store or Google Play. Then, search “TuyaSmart”.
2. Scan the QR code below to download.

• Android 5.0 / iOS 8.0 or higher

B. Adding the Device

1. Place the main unit next to the home router (2.4GWiFi) and ensure batteries are installed. Press and hold the button on the unit for 5s and then the indicator light will flash red rapidly, indicating that the unit is in the WiFi Configuration status.
2. Please connect your mobile phone and the device to the same WiFi network, and then launch the APP “ TuyaSmart ”.
3. It is recommended to enable the bluetooth function of your mobile phone before launching the APP so that the device will be automatically detected more easily.

NOTE:

If failed to detect the device, follow the instructions below to add the device.

Two Methods of Adding the Device a. Auto Scan

1. Enable the bluetooth function of your mobile phone.
2. The device is in a WiFi Configuration state.
3. On the APP’s home page, tap “+” at the upper right corner and then tap “Auto Scan

b. Add Manually

1. The device is in a WiFi Configuration state.
2. On the APP’s home page, tap “+” at the upper right corner and then tap “Add Manually”.
3. Product type: Sensors > Contact Sensor (Wi-Fi).
4. Enter the WiFi account and password. Select the network configuration method (EZ mode or AP mode) according to the indicator light.

NOTE:
The step-by-step instructions on the app may slightly vary due to the app update. Simply follow the actual instructions on the app when adding the device.

C. APP FAQ

1. The APP cannot find a new device when adding the device.
2. Please check whether the network you connected to is 2.4GWiFi.
3. Please check whether the WiFi password you typed is correct.
4. If the above operation is correct, reset the device and add it again.
5. Device Reset

• a. EZ mode
• In the standby state
• Press and hold the Reset button for above 5s, and the indicator light will flash rapidly to indicate the network has been reset and is entering EZ mode.

b. AP mode

• Under the EZ mode, press and hold the Reset button again for above 5s, and the indicator light will flash slowly to indicate that you have switched to AP mode.
• Pressing and holding the Reset button again for the above 5s can return to EZ mode.

Description of Functions

1. How Does it Work
   • When the magnet is separated from or reattached to the main unit, the unit will turn on the green indicator light and push an alert to your mobile phone through Wi-Fi.
2. Low Battery Indicator
   • When the battery voltage level is low(<15%), a push notification will be sent to the APP for an alert. Please replace the batteries immediately.
3. When the magnet is separated from or reattached to the main unit, it will attempt to connect to the network. If connecting to the APP is failed, it will enter into a standby state.
4. Indicator Light:
   • Flash red rapidly: WiFi configuration in
   • EZ mode(2 blinks/second).
   • Flash red slowly: WiFi configuration in AP mode (1 blink/second).
   • Flash green: The magnet is separated from or reattached to the main unit.

Technical Specifications

Troubleshooting

1. If the APP fails to receive messages after the device is triggered, please check the WiFi to see if it works properly.
2. If no push notifications are received after the device is triggered, please check your mobile phone to see if it has enabled the Allow Notification” function.

CAUTION

• Batteries may leak harmful liquids or ignitable materials or explode causing injury and product damage.
• Do not mix old and new or other battery types.
• Replace all batteries at the same time.
• Remove batteries if a product is to be unused for extended periods.

FCC Warnings

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.

Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>