CRYSTORAMA WIN-617-BF-CL-MWP Winham Linear Chandelier Instruction Manual

CRYSTORAMA WIN-617-BF-CL-MWP Winham Linear Chandelier

Product Information

Product Usage Instructions

1. Determine the preferred hanging height and adjust the chain accordingly.
2. Feed the wires through the hanging stem and chain on both sides.
3. Attach the stem to the fixture body.
4. Hang one end of each piece of chain at the loop on the canopy and the second end at the loop on the top of the stem.
5. Insert the recommended bulb (not included).
6. Dress the crystal strands as illustrated using the provided Crystal Key.

Crystal Key

Mounting Plate Installation Instructions

1. Measure the distance between the two mounting keyholes on the mounting plate.
2. Mark two points on the ceiling according to the measured distance.
3. Drill two holes at the marked points and insert the plastic anchors.
4. Place the mounting plate over the outlet box and insert two wood screws into the plastic anchors. Tighten them.

DETAILED ILLUSTRATION

SUGGESTED CRYSTAL PLACEMENT TOP VIEW PLEASE REFERENCE CRYSTAL KEY

All electrical components must be installed by a licensed electrician in accordance with the national electric Code and the appropriate local electrical codes You will need 6 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.

WARNING : This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DAMP RATED

How to Install

1. Determine the preferred hanging height and adjust to the required chain.
2. On both sides, feed wires through the hanging stem and chain.
3. Attach the stem to the fixture body.
4. On each piece of chain, hang one end at the loop on the canopy and the second end at the loop on the top of stem.
5. Insert recommended bulb (not included).
6. Dress the crystal strands as illustrated.

PART NUMBER

Crystal Key

• 14 Sets.
  (5) 14mm + (4)20mm + (1)30mm

• 14 Sets.
  (7) 14mm + (5)20mm + (1)30mm

• 14 Sets.
  (3) 14mm + (6)20mm + (1)30mm

• 12 Sets.
  (10) 14mm + (4)20mm + (2)30mm

• 12 Sets.
  (6) 14mm + (4)20mm + (1)30mm

• 14 Sets.
  (4) 14mm + (2)20mm + (1)30mm

• 14 Sets.
  (3) 14mm + (3)20mm + (1)30mm

• 14 Sets.
  (5) 14mm + (4)20mm

• 16 Sets.
  (3) 14mm + (2)20mm + (1)30mm

• 12 Sets.
  (5) 14mm + (2)20mm + (1)30mm

For installation of the mounting plate

1. Please measure the distance between the two mounting keyholes on the mounting plate.
2. Make two points on the ceiling according to the distance measured above.
3. Drill two holes at the two points and insert the plastic anchors.
4. Put the mounting plate over the outlet box and insert two wooden screws in the plastic anchors and tighten them.

• (1) – Mounting Hardware includes:
  • (1) – Mounting Plate
  • (4) – Machine Screw (3) – Wire Connector (2) – Plastic Anchor (2) – Wood Screw
• (1) – Canopy(L28″,W4.5″,H0.75″) #XRE617BFCAN28IN
• (4) – Fixture Loop
• (4) – Quick Link
• (2) – Hanging Chain(each72″,5.0mm) #XRE617BFCHA5MM
• (2) – Hanging Stem(6″,12.7mm) #XRE617BFSTEM6IN

References

• Crystorama Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>