Beelux LED Lighted Makeup Mirror User Manual
- June 17, 2024
- Beelux
Table of Contents
Beelux LED Lighted Makeup Mirror User Manual
Main Diagram
Lighting and Button Control
Integrated light sources and systems are not replaceable. Please do not change by yourself. The lights are controlled by a touch sensor on the mirror surface to turn on/off and adjust brightness and color temperatures.
Click to control the light
ON/OFF Long press to adjust the brightness (Range 10%-100%) Click to control
the light ON /Warm white/Neutral white /Daylight/OFF
Notice
- This lighted makeup mirror uses Lifetime Energy Saving LED strip light. Replacement LED strip light are not required.
- All wiring should be done after cutting off the power, turn on the mirror after completing the installation;
- Cleaning must only be done with a dry cloth, do not wipe it when energized;
- Always place the product on a flat, steady, and stable surface;
- Do not disassemble the makeup mirror at will. We do not assume any responsibility for the damage caused by disassembly;
- Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.
Customer Service
- 24-Hours customer service help -Email: ledmirrorlight@outlook.com
- Warranty: 12-Month Limited Warranty
If the mirror has any problems on arrival (damaged product, stopped working, missing accessories), no need to return it. Please contact us in time and we will provide a replacement for free.
Special Feature
Built-in touch sensor switch
5V DC power cord
10%-100% Dimmable and 3000K/4000K/6000K can adjust the brightness and the color temperatures of the lights as per your needs
Parameters
Color| Size| Power| Input Voltage| Frequency| LED
Quantit y
---|---|---|---|---|---
Black| 12in/16in| 10W/15W| 5V| 50/60Hz| 102/132PCS
White| 12in/16in| 10W/15W| 5V| 50/60Hz| 102/132PCS
Product Size
Package
-
Lighted Makeup
-
5V DC power cord
-
User Manual
Product Size
Installation Step
-
Take out the vanity mirror, Detachable Base, Screwdriver, 2 Screws, and non-slip mat.
-
Align the holes on the bottom of the bracket with the holes on the base.
-
Put the screws in the holes, and tighten the screws with a screwdriver.
-
Stick the non-slip mat to the base with 3M adhesive.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>