di-soric LI 96-12.5-1188-1240 I Measuring Light Grids Owner’s Manual
- June 13, 2024
- di-soric
Table of Contents
di-soric LI 96-12.5-1188-1240 I Measuring Light Grids
Product Information
The 207050 LI 96-12.5-1188-1240 I Light grids are a type of sensor that includes evaluation electronics for measuring and switching. They are designed with a compact aluminum housing, making them easy to install. The light grids have a horizontal or diagonal beam evaluation and are equipped with evaluation electronics for switching.
Features:
- Compact design
- Aluminum housing
- Easy to install
Product Usage Instructions
To use the 207050 LI 96-12.5-1188-1240 I Light grids, follow these instructions:
-
Identify the transmitter (1) and receiver (2) units.
-
Determine the desired monitoring height (3).
-
Install the light grids according to the provided assembly instructions. Ensure proper alignment between the transmitter and receiver units.
-
Adjust the profile length (4) as needed.
-
Connect the evaluation electronics (5) to the light grids.
-
Verify the correct profile cross section (6) for your application.
-
Refer to the provided color code for wiring: BN (brown), GN (green), GY (grey), WH (white), YE (yellow).
-
Ensure the service voltage is compatible with your power supply.
-
Configure the desired output function and switching output based on your requirements.
-
Check the light source, color, wavelength, beam evaluation, and beam separation for suitability in your application.
-
Set the number of beams and adjust the monitoring height and range accordingly.
-
Operate the light grids within the specified ambient temperature range and protection type.
-
Connect the light grids to the appropriate connections as specified in the user manual.
- With evaluation electronics LVE … / LVX … measuring and switching
- With evaluation electronics LVB … switching
- Beam evaluation horizontal or diagonal
- Compact design
- Aluminum housing
- Easy to install
-
Transmitter
-
Receiver
-
Monitoring height H
-
Profile length L
-
Evaluation electronics
-
Profile cross-section
To be used with evaluation electronics LVE … / LVX …./ LVB …
- BN: brown
- GN: green
- GY: grey
- WH: white
- YE: yellow
Technical Data
For more information and accessories related to the product, please visit the di-soric website.
- Service voltage 20 … 26 V DC (see evaluation electronics)
- Assembly Threaded bolt (3)
- Profile cross section 12 x 24 mm
- Dimension
- A: 120 mm
- B: 500 mm
- X: 13,5 mm
- Y: 38,5 mm
- Profile length 1.240 mm
- Housing material Aluminum (natural)
- Protection class III, operation on protective low voltage
- Evaluation absolute, percentage, Configurable via evaluation electronics
- Evaluation electronics external
- Output function Configurable via evaluation electronics
- Switching output Configurable via evaluation electronics, NO, NC
- Light source LED
- Color Infrared
- Wavelength 880 nm
- Beam evaluation via external evaluation electronics
- Beam separation 12,5 mm
di-soric GmbH & Co. KG . Steinbeisstraße 6 . DE-73660 Urbach. www.di-
soric.com
© di-soric. Right to change reserved. 13.08.2022.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>